Search found 23 matches
- Mon Nov 05, 2012 5:20 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
A simple LiPo alarm wil sufice and please flash those ESC's with SimonK The newer Plush don't use Atmel', do they? actually i don't know if the new Plush ESC's are using Atmel. I didn't even know there where "new" ones. The "old" ones flashed real nice Edit: Looks like your righ...
- Sun Nov 04, 2012 10:08 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
A simple LiPo alarm wil sufice and please flash those ESC's with SimonK that wil rock your life
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18987
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18987
- Sun Nov 04, 2012 9:11 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Do you have SimonK firmware on your ESC's
If not this sounds like power cut-off from ESC's when power is to low.
you stated that you have flown for 15 to 20 minutes
If not this sounds like power cut-off from ESC's when power is to low.
you stated that you have flown for 15 to 20 minutes
- Sun Oct 28, 2012 11:55 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
nicog wrote:thank you. you have the latest right? the one I made on 10 october or so... You should have a dropdown list with baud rates next to com...
Yep did a search in this topic and found a direct link.
thx
- Sun Oct 28, 2012 10:10 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
You mean in windows GUI. Tcarnal, are you using eosbandi GUI?. This soft is not up to date and won't show true right switches. You need to use multi wi conf or naze32 aio from me. Switch are now dynamic so..... I Use MultiWiiWinGui 2.1 But i understand that this version isn't the right version anym...
- Sat Oct 27, 2012 11:05 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Found the issue,
Arm isn't Arm anymore
Need to set RTH this is Arm in the MultiWiiGui.
al is working now.
Arm isn't Arm anymore
Need to set RTH this is Arm in the MultiWiiGui.
al is working now.
- Sat Oct 27, 2012 9:47 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Hi Lapino,
Those are the first things i checked
Motor_stop is enabled
I can arm it using the stick move but not with a switch
before i used the last stable version and this worked with the switch.
I mouted the switch to the arm funtion.
Those are the first things i checked
Motor_stop is enabled
I can arm it using the stick move but not with a switch
before i used the last stable version and this worked with the switch.
I mouted the switch to the arm funtion.
- Sat Oct 27, 2012 4:55 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Hi All. Just flashed my Acro Naze 32 with the r234. And my engines won't respond. I have my quad connected to the MultiWii Gui and al seems to work. But when i arm the board (light turns on in the software) and i throttle up the engines won't spin and the MultiWii software doesn't show any engine ac...
- Sat Oct 13, 2012 7:00 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
ruffster wrote:Brill - thank youtimecop wrote:For flyingwing stuff, i've made some small prototypes for PPM input w/mpu6050 and baro:
http://i.imgur.com/GEIUA.jpg
I hope you do a batch of those I'd love a couple!
That sure is a nice small board perfect for a small quad
- Thu Oct 11, 2012 7:28 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Is there a preferred bluetooth adapter to use with the android configurator? I use this one http://www.geekmag.fr/naze-32-test-et-configuration-de-la-fc-abusemark/2/ and used this to configure it correctly (Needed RS232 > TTL converter) http://www.rasmicro.com/Bluetooth/EGBT-045MS-046S%20Bluetooth%...
- Sat Sep 29, 2012 11:08 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
yes, you can mirror aux1..4 to the RC pins 5..8 by setting gimbal_flags=8 in cli, however if you're using a fullsize receiver like D8R or similar, you can just connect regular servo connectors to channels 5,6,7 (while keeping PPM on channel 8) and it works as expected. I'm doing so also. Cppm and p...
- Sat Sep 29, 2012 8:11 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Hi All, A completely diferent question, (not GPS) I am using Frksy with cppm and al seems to work good (after reading about the problemes with the cppm timing of Frsky and more than 6ch http://diydrones.com/profiles/blogs/why-frsky-cppm-signal-is-so-disappointing ) Anyway i was wondering if it where...
- Fri Sep 28, 2012 5:51 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Sleeping ?? you??
Thought you were alway's online
Kidding
Thought you were alway's online
Kidding
- Fri Sep 28, 2012 5:39 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Just looked at it and it looks like there are right now
•6 Units in Stock
•6 Units in Stock
- Sun Sep 23, 2012 11:04 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Found the problem
Faulty wirering
Sorry TC for ever doubting your amazing board.
Faulty wirering
Sorry TC for ever doubting your amazing board.
- Sun Sep 23, 2012 9:51 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Seems to be something wrong with the flight controller.
I have second one (Naze32 withoud baro and magno) with the same firmware connected the same way and this one is working like it shoot.
Someone an idea?
both flight controllers have never been used until today
thx
Thijs
I have second one (Naze32 withoud baro and magno) with the same firmware connected the same way and this one is working like it shoot.
Someone an idea?
both flight controllers have never been used until today
thx
Thijs
- Sun Sep 23, 2012 9:24 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Hi all, I am sure this is just something i am overseeing but i have a small problem regarding my engines. I finally received my X9 with FRSky Tx and Rx and i am using PPM. My Naze32 (green one) is using the lastes stable BaseFlight (july 25th) When i connect the flight controller to the MultiWii sof...
- Mon Sep 10, 2012 2:09 pm
- Forum: General discussions
- Topic: AFRO FC
- Replies: 3
- Views: 3037
Re: AFRO FC
Lets just Say
RTFM
RTFM
- Fri Sep 07, 2012 2:11 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Aah oke i am all but a programmer
thx
thx
- Fri Sep 07, 2012 1:58 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Just out of curiosity
What's the diferents between the baseflight and the baseflightplus?
I wasn't able to find an answer on the big bad internet.
What's the diferents between the baseflight and the baseflightplus?
I wasn't able to find an answer on the big bad internet.
- Fri Sep 07, 2012 1:13 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
That's great news
When do you think this is available?
Can't wait for my transmitter to arrive.
Just sold my DX6i and my hands are itching
thx
When do you think this is available?
Can't wait for my transmitter to arrive.
Just sold my DX6i and my hands are itching
thx
- Fri Sep 07, 2012 12:47 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
Hi all, I have a Question about Telemetry, I have a Turnigy 9x with Frsky on its way and have found al the things i need to do to make Telemetry working from my Naze32. The FrSky converter from AbusMark (TC) is already mounted on. One thing is just not clear to me there was alot of info on the Telem...
- Tue Sep 04, 2012 7:59 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1429846
Re: Naze32 hardware discussion thread
timecop wrote:doughboy wrote:just curious as to why this cannot be used with any of the dji frames.
thanks
Mostly because I said so, and also because the frames are vibrating, heavy pieces of plastic trash.
Hehehehehe just as i thought