MultiWii

Hi, I have quite the same troubles with MAVLink V2 board. After wiring the board, there was not image received. By pushing the RESTART in the GUI, after 3 to 4 seconds the image was present for 1 second, disappeared for 2 seconds, again present for 1 second and finally disappeared. I live in Ramboui...

Hi All, Please help me with my first steps in fpv-osd. I have a CRIUS AIO PRO 2560 board with MultiWii 2.3 and a MAVLinkOSD V 2.0. I see the images but nothing concerning the data from the FC board. Which is the last version which I must download on the MAVLinkOSD board? Which is the code on the FC ...

@georges41 Just use the default config.h file Do you have video from the camera? - if no - check your wiring and that correct voltages / jumpers on osd are set. If yes you have video but no OSD, make sure PAL/NTSC is set correctly. @visper - uh oh - don't liek sound of that. I don't want to upgrade...

Hi ALL,
I have an Upgraded MAVLinkOSD V2.0 board. Please let me know the possible configuration parameters compulsory in order to make it work with the 2.3 version.

Yours,
Georges

Hi ABL, I am speaking only on the images on the Goggles. Of coarse you are right. It is stupid to try to see some thing on the PC as long as it is not properly connected. To clarify: a) Yes, I have a 5.8 GHz FAT SHARK TX + CAM and RX integrated on Goggles. Tested separately and working OK. b) By usi...

Hi shikra, You said normally no changes are required. Do you think that, NORMALLY, it is possible to have the screen on my Goggles by using only the FAT SHARK+CAM and the Simulator of the KV_Team_GUI? I have any image and maybe I missed something at the level of config.h file? Please send me a model...

Hi, Please help me. I bought an Upgraded MAVLink V2.0 board. Unfortunately, I am not able to make it work. I downloaded on it KV-Team-OSD and managed to change the settings on it with the KV-GUI-2.3. An example of the GUI screen is in the attached file. The FAT SHARK with RX on googles shows any ima...

KV_TEAM_OSD_GUI Simulator Test.jpg Hi carlonb, I am using an AIO Flight Controler Atmega 2560 V2.0 with MultiWii 2.3. For the moment I ma interested to start working the MAVLink board with the simulator. In spite of many and repeated configurations tests the googles coupled with the receiver of the...

Hi All,
Please help me to start with my MAVLink-OSD board. Which are the options to take in the config.h in order to work with a FAT SHARK system. The power supply is obviously different for the TX+ CAMERA. I would like to test the R1.1 version with the GUI Simulator.
Yours, Georges

I found the Eagle files for the minim and it's a 0.1uf. A old soundblaster card volunteered as a donor a couple days ago. F#*$k these things is tiny to solder.... I now have a working osd.. B-) And 2 brand new on the way from Whitespy. Good work by the KV team. Patrik Hi Patrik, Would you be so kin...

Hi,
Please help me to start working with a MAVLink board and a FAT SHARK 5.8 GHz system. After downloading the KV_Team_OSD_2.3 on the board, the GUI application simulator ON, as in the attached file, it is any signal received, NO Image, NO miniOSD.

Yours, Georges

Thanks fr the reply brewski. I use individual outputs from the RX. Mean time I tryed with a new config.h from a friend and the Quad starts to receive signals from the TX. Unfortunately, as long that I ARM the Quad it starts a Bep-Bep-Beep signal. This one continues even after the disarming the Quad....

Hi ALL, Please help me to solve this bug! I mounted a CRIUS_AIO_PRO_V1 board and tested it with the MultiWii 2.3 classic software. The Quad is flying OK. I use a SPEKTRUM DX7 and an ORANGE RX. With the same hardware I downloaded the MultiWii 2.3-navi-B7. Unfortunately in this last case the Quad did ...

Hi Xavier,

In spite of a right choose of corresponding board and port parameters for me too is an error downloading message. See the attached file.

Any idea?

Yours,
Georges

Hi All, Please help me to configure my CRIUS SE board in order to have the possibility to change manually the reference position of the camera gimbal by adjusting the 7-th channel in my SPEKTRUM TX. I would like to use D5 or D6 pin. Into the config.h file I must choose #define SERVO_MIX_TILT #define...

Re: Crius MWC MultiWii Standard V2.0 SE [Help] Postby Georges41 » Fri Sep 06, 2013 10:49 am Hi All, Please help me to configure my CRIUS SE board in order to have the possibility to change manually the reference position of the camera gimbal by adjusting the 7-th channel in my SPEKTRUM TX. I would l...

Hi All, Please help me to configure my CRIUS SE board in order to have the possibility to change manually the reference position of the camera gimbal by adjusting the 7-th channel in my SPEKTRUM TX. I would like to use D5 or D6 pin. Into the config.h file I must choose #define SERVO_MIX_TILT #define...

Hi timecop,

I am speaking on Rx logic of the BT board. Maybe I did'nt understood correctly some hardware comments.

Hi timecop,

It does not need to connect previously on the Rx cable a resistor of 10 kOhms in order to prevent the eventual difference between the 5 V logic of the board and the 3.3 V logic of the BT module?

Yours,
Georges