Search found 70 matches

by LeoWie
Mon Sep 15, 2014 9:51 pm
Forum: Buy & Sell
Topic: Verkaufe: Hexa Copter ohne Sender, Eigenbau, >= 950 g
Replies: 0
Views: 2246

Verkaufe: Hexa Copter ohne Sender, Eigenbau, >= 950 g

Verkaufe / for sale: m Hexa Copter ohne Sender, Eigenbau, 400mm, >= 950 g + 2 Akkus LiPo 3S 2200mAh Mainboard: Naze32 ( m ), ca. 1 Jahr alt, absturzfrei Fertig aufgebaut, mit 6 Motoren + Kunstoff-Props, 6 Regler Hobbywing 12 A, 6K-Empfänger Orange inkl. Summensignal-Board (diese Kombi entspricht ein...
by LeoWie
Sat Oct 19, 2013 12:53 pm
Forum: Frames
Topic: Micro Naze32 CFK frame 150mm, self made
Replies: 2
Views: 3957

Re: Micro Naze32 CFK frame 150mm, self made

Someone asked for my setup in the vid ... # version Afro32 CLI version 2.0 Sep 8 2012 / 17:00:09 # features Enabled features: VBAT MOTOR_STOP # map Current assignment: AETR1234 # mixer Current mixer: QUADX # set Current settings: deadband = 0 yawdeadband = 0 alt_hold_throttle_neutral = 20 midrc = 14...
by LeoWie
Sun Feb 10, 2013 7:51 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

'lol' + not read the manual = ?
by LeoWie
Mon Feb 04, 2013 6:26 pm
Forum: Frames
Topic: My simple Naze32 500g - Foto-Tricopter
Replies: 4
Views: 3670

Re: My simple Naze32 500g - Foto-Tricopter

Update: now a half of 1 liter Cola - Tricopter :-) and frame modified: 2x 6mm CFK tubes in front (not 4mm full)
by LeoWie
Fri Jan 04, 2013 8:10 pm
Forum: Frames
Topic: My simple Naze32 500g - Foto-Tricopter
Replies: 4
Views: 3670

Tri-Condom-Copter ;-)

low cost high precision baro - propeller downwash protection.
:lol:
by LeoWie
Mon Dec 31, 2012 4:33 pm
Forum: Frames
Topic: My simple Naze32 500g - Foto-Tricopter
Replies: 4
Views: 3670

Re: My simple Naze32 500g - Foto-Tricopter

Videos: "Naze32 - Mini Tricopter 1st Desktop Test" -> m CLI / 1st Software custimizing (to be continued) based on r239: mixer tri feature gps set gps_type = 1 set gps_baudrate = 57600 feature MOTOR_STOP feature -vbat set nav_controls_heading = 0 set servo_pwm_rate = 200 set p_pitch = 25 se...
by LeoWie
Sun Dec 30, 2012 5:43 pm
Forum: Frames
Topic: My simple Naze32 500g - Foto-Tricopter
Replies: 4
Views: 3670

My simple Naze32 500g - Foto-Tricopter

Again a very simple home made CKF frame w Naze32, simple + low cost (HK-Wingcam) + GPS; weight 500g with CAM + Lipo 3S 1000mAh.

Video: Naze32 Mini-Tricopter Indoor http://youtu.be/Z6L6UyWVPag
by LeoWie
Thu Dec 27, 2012 9:03 pm
Forum: Software
Topic: GPS lock ups
Replies: 14
Views: 6537

Re: GPS lock ups

Thank you! Cable tree should also help with ground loops. DO you have the ECS BECs connected also? No - ESCs BECs are not in use: all red cables are plugged off, see left (3): useless red ESC cables are isulated / shrinked red / not connected to the FC (variant: do not modify ESC cables, simply tur...
by LeoWie
Thu Dec 27, 2012 8:09 pm
Forum: Software
Topic: GPS lock ups
Replies: 14
Views: 6537

Re: GPS lock ups

In the moment I use an old Rabbit GPS module (1). On other Naze32 FC copters "Crius CN-06 GPS Receiver v2.0 Module" does the same. I also have some other no name Ublox CN-6 modules (not testet, but look like can be used). Cable tree: see (2): from UBEC +- goes to a tree that forkes to 3 br...
by LeoWie
Thu Dec 27, 2012 1:34 pm
Forum: Software
Topic: GPS lock ups
Replies: 14
Views: 6537

Re: GPS lock ups

Update: all my Naze32 HEX6X GPS - look like software - problems are solved now. 95% of my GPS hold / home copter wobbles were caused by / depended on: 1. Where the GPS antenna is mounted (not ok: not high enough and/or distance to FC less than 80 mm), 2. If there is an extra cable tree from ubec to ...
by LeoWie
Sun Dec 23, 2012 5:58 pm
Forum: Software
Topic: GPS lock ups
Replies: 14
Views: 6537

Re: GPS lock ups

Update: made a cable-salad cleanup + extra cable tree form ubec to cam stab servos ... and will test this
w no/little cli changes soon.
by LeoWie
Sun Dec 16, 2012 5:32 pm
Forum: Software
Topic: GPS lock ups
Replies: 14
Views: 6537

Re: GPS lock ups

Still have no "Big Picture" of what's going on in the GPS related src / not much time to look into the src. But after reading EOSBandis docu (see "...") and because weather was ok to fly (+ 3,5 deg celsius, but too cold for handling my laptop outdoor) so I wantet to try some thin...
by LeoWie
Fri Dec 14, 2012 5:14 pm
Forum: Software
Topic: GPS lock ups
Replies: 14
Views: 6537

GPS_UBLOX RTH ups

Testing GPS_UBLOX (with set nav_controls_heading = 0, all GPS related values r237 defaults) I had a little problems with my Naze32 HEX6X ~1200g-: - POSHOLD works fine, - RTH (switched on ~25m away from home) makes troubles after some seconds: the copter begins to wobble und RTH has to be switched of...
by LeoWie
Mon Nov 26, 2012 9:09 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

@ Crashpilot1000: thx + no - "HEX6Xy" is his name (speak "Hex-Sex-XXX-y") :lol:
by LeoWie
Sun Nov 25, 2012 8:07 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

I'm out testing r209. Thx got it. No problems so far... Edit 1: GPS hold + home works Video later. ~~~ Edit 2 ~~~ Test Report r209 Summary: ... it was a windy day (12+km/h ...) and Rabbit GPS on a Naze32 with Test r209 ... WORKS FINE. ... and more (sorry @ Rabbit): The Naze32 GPS Hold + Home (with ...
by LeoWie
Sat Nov 24, 2012 10:21 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

@ Gimbal: read post 1.
by LeoWie
Wed Nov 14, 2012 10:29 pm
Forum: Frames
Topic: My Naze32 610mm Folding Frame CFK <1000g
Replies: 2
Views: 3630

Re: My Naze32 610mm Folding Frame CFK <1000g

see attachment
by LeoWie
Mon Nov 05, 2012 8:48 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

@ mindthomas: ... maybe a TX error? / is TX failsave programmed? Details: yesterday I had 3 crashes caused by a faulty TX antenna (connector cable broken (TX transport problem), wanted to repair it an fly while waiting for the new one already I ordered) ... one crash in a 90 degree level position ~ ...
by LeoWie
Thu Nov 01, 2012 5:32 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

Now my Folding Frame Copter has a stabilzed + controlled cam: m . Copter: http://www.multiwii.com/forum/viewtopic.php?f=12&t=2660 , mods: now Tgy Plush ESC's, 5Ah UBEC (so only ESC's signal/white connected to FC) + 9CH DSM2 RX with sumsignal converter m . Weight now is 1230/1300g (Lipo 3S 2200/3...
by LeoWie
Tue Oct 30, 2012 8:10 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

360walt wrote:I was wondering if someone could share what rate and expo they use. Right now my stock setup seems way to aggresive.I am mainly shooting video and the sticks are way to touchy.

I use about Expo 60% on 2 D/R switches (windy: off, no wind: on) on my TX's
by LeoWie
Thu Oct 25, 2012 7:23 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

Hi, in http://www.multiwii.com/forum/download/file.php?id=1590 is all I changed via CLI (nothing level related). Level I always put on an extra switch in the GUI to "ANGLE" (maybe someone ment this is bind? + I mean this: http://www.multiwii.com/forum/download/file.php?id=1417&mode=vie...
by LeoWie
Tue Oct 23, 2012 3:59 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

r231 GPS?

[ Solved ] Hi, with r231 I got no GPT link ( copter m , the same RX + GPS module combo worked with r218). Buzzer stopped beeping some seconds after power on + switch is ok (switching GPS on/off in the 1st seconds after power on = on/off). But in the GUI I got no green GPS bar and no lock in flight. ...
by LeoWie
Sun Oct 21, 2012 9:31 pm
Forum: Frames
Topic: My Naze32 610mm Folding Frame CFK <1000g
Replies: 2
Views: 3630

My Naze32 610mm Folding Frame CFK <1000g

My new home grown Naze32 610mm (diagonal mot-mot) Folding Frame <1000g (with Lipo 3S 2200mAh) made of ~ 7 meters CFK material d=4mm and a little plywood Components: Motor Keda 20-28M 15A 1050Kv ( m ), Props 10", HK Super Simple 18-20Ah ESC, original FW (I'm still waiting for the Atmega socket ....
by LeoWie
Thu Oct 18, 2012 11:47 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

i added a new item in the sw section. fast descends can lead to a bit of wobble. a pt1 lement kills most of the wobble. it's a simple change not that much. and i hope you as well will have fun with this small patch. for those flying fpv a 'must' tc, is this going to be included in your future basef...
by LeoWie
Tue Oct 16, 2012 8:42 am
Forum: Links
Topic: An Idiot's Guide To PID Control (c) http://www.pidtuning.net
Replies: 0
Views: 3747

An Idiot's Guide To PID Control (c) http://www.pidtuning.net

An Idiot's Guide To PID Control
by LeoWie
Fri Oct 05, 2012 7:14 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

Hi LeoWie, Any chance you could post a link where to buy the GPS module that you're using successfully with Naze32? I've got an MTK one and its not happening for me... Thanks in advance Ruffster I tested an (old) Crius CN-06 (V1) and a m . I would order the Crius CN-06 V2 (what Juergen wrote). PS: ...
by LeoWie
Fri Oct 05, 2012 7:02 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

NOT a GPS RTH problem

Problem: It looked like I have problems with GPS RTH (PH was fine from he beginning) with my Naze32: my copter got confused / began to turn after switching on RTH. Sometimes I lost control (looked like a P/I/D problem) ... especially at the H point. 1st I excluded all other bad influences: checking...
by LeoWie
Tue Oct 02, 2012 5:00 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

Variant: found half a faraday cage in the kitchen and a new pantyhose in the sleeping room. The red hole will be under the GPS RX soon, the green under the Naze32 (inside the central Schwimmnudel damper between GFK frame + power dist board) ... both connected to GND. (see pic attached) Remark: I did...
by LeoWie
Sun Sep 30, 2012 8:04 am
Forum: Frames
Topic: Naze32 - Low Cost / Heavy Duty / Low RPM - 450mm Foto Copter
Replies: 0
Views: 2473

Naze32 - Low Cost / Heavy Duty / Low RPM - 450mm Foto Copter

Frame: Based on GLB’s „Airframe Kit Super Strong Frame for QuadCopter“ ( m ). Modified: longer metal screws M3x10mm (original too short) + many extra plastic spacers (so the FC can be mounted inside the frame), foam legs = heating pipe isulation, 2 x pinewood 6x6x75mm painted black (under the Naze3...
by LeoWie
Sat Sep 29, 2012 12:38 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

nicog wrote:Why don't you try to use the naze32 windows configurator? It updates the latest firmware on svn (you download and update).

+1
(pic attached)
by LeoWie
Wed Sep 26, 2012 1:40 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

Many thanks to rotary65 for prev. post. It's two missing links for me + very useful. PS: Yesterday I had some glasses of wine in a retaurant in Vienna's Arts-/MuseumsQuartier with a new friend from this forum and we both had a copter with us: my Micro Naze32 + another <1 kg Naze32 quad. Within 6 hou...
by LeoWie
Mon Sep 24, 2012 2:36 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

1st of all: have(had) a look at m 's page 11(?). As a total newbie (in gyro only mode) it's not very easy: the angle of the copter will be indifferent: eg 10 degrees = 10 degrees till you control it back to 0 on your TX. If this your 1st command (maybe with heart rate 195+ stress? ) is -55 degrees a...
by LeoWie
Mon Sep 24, 2012 7:25 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

ad u-blox GPS: In the meantime I have set gps baud back to 57.6k (after some connection problems + after I have seen how fast u-blox test software sends sentences via 9.6k ... so I think 57k is fast enough to catch this some Hz only infos). Additional info (not verified): - After changing gps relate...
by LeoWie
Tue Sep 18, 2012 11:47 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

A very intersting link - thx Jürgen.
Do you think CFK material would work? .. or alu? ... or copper?

JUERGEN_ wrote:.
GPS interference is always a problem. :evil:
a protective against GPS interference.
is not to be underestimated
[img] ...
;)
by LeoWie
Tue Sep 18, 2012 7:54 am
Forum: Frames
Topic: Micro Naze32 CFK frame 150mm, self made
Replies: 2
Views: 3957

Micro Naze32 CFK frame 150mm, self made

Naze32 Micro KeyChain Cam Copter Frame 150mm (mot.-mot.): 8 x CFK d=2mm, l=250mm + some extra (RX holder ...), 1 x CFK plate 0,7mm 55 x 55mm (you can cut it with a jigsaw, ear protection + many spare blades needed ), 8 x pinewood 4x4mm l=50mm (painted black), 8 x endcaps 6mm (from kiteshop), M3 nyl...
by LeoWie
Mon Sep 17, 2012 9:49 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Micro Naze32 200g Cam-Copter

Micro Naze32 is a real (KeyChain)Cam-Copter now! :lol: -> viewtopic.php?f=12&t=2475
by LeoWie
Mon Sep 17, 2012 12:33 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

@ Jürgen u-BLOX-6 / CN-06 GPS Receiver: fully agree ( see http://www.multiwii.com/forum/viewtopic.php?f=22&t=2387&start=150#p22841 , http://www.multiwii.com/forum/viewtopic.php?f=22&t=2387&start=150#p22864 ... ) MediaTek MTK3329 GPS Module: I wanted "... indicator light,flashing...
by LeoWie
Mon Sep 17, 2012 11:15 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

a944734 wrote:MTK testers (anyone ?) be cautious - possibly another case of control loss in PH
http://www.rcgroups.com/forums/showpost ... tcount=425

... on the way / in about 2 weeks I'll test "MediaTek MTK3329 GPS Module " (e.g. http://www.goodluckbuy.com/mediatek-mtk ... ation.html ).
by LeoWie
Sun Sep 16, 2012 6:32 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

simply plug in Naze ch5 or 6 +/- (5v), 57k baud
by LeoWie
Sun Sep 16, 2012 12:27 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377927

Re: Naze32 hardware discussion thread

timecop wrote:flash those esc and it will be even more awesome.

Thanks for the hint. I had a look: I have this 4 + 6 on another copter + 6 spare; all older than 2 years ... so enough to test and I think I also have all adapters needed ... and there are useful links in RCG I think. I will have a try.