MultiWii

vpb

10.11.6 is El Capitan, next is 10.12 Sierra, and 10.13 is High Sierra

vpb

Hi, is anyone able to make MW Conf 2.4 run on MacOS High Sierra? Tks!

vpb

Oh good news, 17-19 sats is so amazing. I'm currently using Rctimer u-Blox CN-06 GPS Receiver V3.1, it works fine but can't reach that number of satellites of yours.

vpb

Any latest flying clip guy? Just want to know you're still flying with MW out there

vpb

MultiWii is still my first choice in my planes. One thing that's still stuck in my RC todo-list is building a fpv plane and use your custom MW firmware. still flying mw2.3, has anyone installed multiwiiconf on to a linux machine, or maybe a raspberry pi 3 Yes, I used Linux 3 years ago, from MW 2.1 ...

vpb

Oh so good to hear that, you're still there Hamberger. Happy flying guys!

vpb

Hello, It looks like Multiwii has no more development since 2.4 version. I miss the time 2012-2013, this forum was very busy with so many alive topics, everyone flied, tested new features... I've still kept visiting this forum occasionally but many old experienced members seem no longer available ex...

vpb

It seems mwii died when google became read only... I'm just kidding guys So really is it current official repo for mwii for now?! m Hello Mahowik, long time no see you till the alt-hold improvement u commited about 2 years ago , how are you now? I'm not sure about that github repo, 'cause the last ...

vpb

Hi, It's quite long without any update. Is there any update on multiwii new repository? Is multiwii still under development now?

vpb

Hi, Sometimes I upload same version-code to board, and all settings I made before are not cleared, but sometimes not. Uploading a different version code will clear the eeprom for sure. So I just dont know exactly when all are reset. Is there a way to store all tuned settings, calibrated data somewhe...

vpb

So my suggestion: After 2.4 release, are you ok to integrate and support frsky things in the main branch ? Its very good idea... I still use Frsky Telemetry with r1739 in the old way, standalone file. And its still working good http://imagizer.imageshack.us/v2/640x480q90/540/xyB1ZH.jpg

vpb

Leo wrote:P and I are stock or did you guys set them up to best suite your machines?

Yes we're talking about PID tuning, ofcourse P & I are tuned to personal flying style, as P & I are easier to tune than D. But zero or near zero D we see that the machine is most stable

vpb

Good to hear that, Lecos

vpb

Hi,
I've flied Y6 & Tri since 2.1 till latest version. I always set D of Pitch & Roll to 0 as I see its the best damping value for my kits. My copters flies well. Just curious, anybody here flies with zero-D like me, and do I miss something if I always go with zero-D?

Tks!

vpb

Hi,
I use MultiWiiConf on Mac, so dont see those checkboxes, but in config file I get

//Navigation engine will takeover BARO mode control
#define NAV_TAKEOVER_BARO 1 //(**)

//Throttle stick input will be ignored (only in BARO)
#define IGNORE_THROTTLE 1 //(**)

vpb

I also had this similar issue just 2 days ago. It happened to my tri with r-1739 version, fortunately I was hovering, tuning the copter at that time. I couldn't control only the throttle, pitch & roll & yaw still ok. The copter wanted to jump high and I just did everything to make it land/cr...

vpb

Ya thank you, get it now

vpb

Hello,

Does anyone clearly know what is the meaning of pattern option of SERvINVy parameter (yaw direction) when configuring via LCD?

I see its 3 letters pattern, default with C.., CNR, ..R, ...

Tks!

vpb

As Multiwii 2.3 is completely changed in code structure, Frsky Telemetry cant work with MW 2.3 (it can work with 2.2). I make some changes to the FrskyTelemetry.ino, now it turns into 2 files FrskyTelemetry.cpp & FrskyTelemetry.h. Those just need to be copied to MultiWii folder. In MultiWii.cpp,...

vpb

Cannot say a word! Beautiful, abormor! You use Gopro as your fpv camera?

vpb

I always fly with zero D, from Y6 to tricopter.

vpb

Ya, my 3rd board is minim board from goodluckbuy, not rctimer. "I hope I can fly"...with osd ha ha ha

vpb

Hi vpb, about correct Minim OSD supply take a look here http://www.multi-rotor.co.uk/index.php?topic=607.0 Cheers Carlo Hi Carlo, Thanks for your instruction! It's such a very simple modification but why it's not on the wiki yet . I hope I'll have luck with my 3rd minim board

vpb

kataventos wrote:
Hi,

why do you need a 3d model?
I can send you the real thing, you can use it to make your antennas forever...

-KV

omg Kata, you mis-understood my pm

, oh my pm is misunderstanding...

vpb

He he, brilliant design Kata! Still waiting for your reply

vpb

Hi Kata, My 2nd minim board (rctimer version) worked okay at home, but it's malfunctioning now when I did flight test this morning, still dont know why . The board is not able to work or connect to FTDI now, just only red led is lighted. Luckily I have one spare board. I guess sth is wrong with 11.1...

vpb

yes, it's magic, default pid... what is your RC, yaw, roll&pitch rate?

vpb

Hi Kata, can you pm me the info for 1280mhz plate too? I use 1.2mm wire. It takes me 2-3 hours for making a couple by hand

vpb

I remember that Alex said he will open a sub-forum for FPV

vpb

I have one current sensor of frsky, but in order to use it, I cannot use frsky-telemetry with multiwii, and looks like it's hard to integrate Frsky sensor module. So that rc-timer sensors is promising. @dramida: Have you tried integrating that current&voltage sensor to Multiwii? How about the re...

vpb

I also thought that it flies a little better with teh new algo / faster loop times - wasn't sure if that was real on my part If you fly FPV in horizon mode try the stock code then try again with: adding this into config.h #define GYR_CMPF_FACTOR 2000 Reducing level D - reduce to around 55 for me, i...

vpb

Very nice flight! Can you share something about your quad?

vpb

afonsos wrote:Thanks shikra,

Line added to config.h just had 2 fpv flights and so far so good,no more weird acc

I still cannot test on my copter, maybe tomorrow. But, if when you move arround, then release the stick, the copter just gets its level and stop drifting, it's magic! Hunger to try...

vpb

I had that issue before, when using with OLED board, the copter has many twitches. Just 1-2 first flights was ok, saw many I2C error in GUI, and the problem was gone till I remove the OLED. But my OLED has some error after some flights, it was very dark that I could not read it clearly. I think mayb...

vpb

Wow thank you Shikra! I always fly FPV in horizon mode. What I expect is that the copter will not/less drift/be pulled back after a forward flight.

I used to fly with 80 level D. Yes I'll try your method.

vpb

nice to hear about that scrat! just cant wait to try with my y6. I read that 2.2 has new angle calculation, hope that horizon mode will be better than before.

vpb

so 2.2 comes now, Thank all the developers!

vpb

OMG why my board sill not arrives yet! T_T.

vpb

Hi,

I see this small Crius V/I Sensor (16$) http://www.goodluckbuy.com/crius-v-i-se ... pilot.html, can it be integrated with multiwii and use with this OSD sw? Hardware sensors will be more accuracy than sw.

vpb

I face the same annoying effect with horizon mode when flying with the wind, especially fly agaist the wind.

vpb

yaw jump effect can be seen strongly in Y6 copter. But now I get familiar with it.

vpb

I see that you have an endless love to bicopter

vpb

Oh richie, I didnot mean hand-off. I meant when you take off, there'll be a stop-point for throttle, just about some seconds before you do your flight. For my reason, I want to know some other copter behaviors, whether it gains or looses altitude, and how long before it gains/loose (1,2 or 3 secs)? ...

vpb

Hi man, I mean when the wind is calm, you just take off, and when the copter reaches its altitude, you stop increasing throttle right? So how long can you do throttle-hand-off? And later then your copter's behavior will go up or fall down?

vpb

kataventos wrote:http://code.google.com/p/rush-osd-development/wiki/Character_Map_Upload
http://code.google.com/p/rush-osd-devel ... dware_Mods
http://code.google.com/p/rush-osd-devel ... ser_manual

I and many people did not get so much A-Z guide like that before, can ask for more

vpb

Later on the day... So i figure out the upload! Firstly i uploaded font_update.ino with changes : #define MAX7456SELECT 6//10-ss #define MAX7456RESET 10//10-ss Then i used TeraTerm, i selected the serial protocol with the right port, then File- Send command @ 19200baud. BUT The OSD shows wired char...

vpb

Yes, my Y6 is a bit heavy too, over 1.5kg. How long does your Mollie keep it altitude before going down (without alt-hold), Copterrichie?

vpb

My minim arrived, I flashed it yesterday but forgot replacing the font. Plugged in serial 0 and it's up, my very first osd , the screen was fullfilled with weird characters, but I could see osd line moving, I meant it worked. I flashed the board with font_update.ino and sent the mcm file via Tera, t...

vpb

Hi, Multiwii Throttle MID & RATE really help changing altitude smoothly. I usally use 50-mid and 35-rate. But I think it should be tuned, I mean you must find the correct mid point value where the copter holds it altitude (for a short time, without alt-hold activation). I dont know whether there...

vpb

Thanks for your great job, Kata!
I guessed this sw will come and ordered minim 3 weeks ago, but still not arrives yet, cant wait...

Search found 231 matches