Search found 10 matches

by JustinTime
Thu Feb 21, 2013 5:53 am
Forum: MultiWii tweaking - flying experience
Topic: x-quad yaws on roll or pitch
Replies: 0
Views: 796

x-quad yaws on roll or pitch

I searched for a solution but couldn't find it.I know it's a PID setting but the question is which one and in which direction. When I give right roll command the quad rolls right but also yaws right. When it goes back to level, left roll, it yaws to the left. When I pitch forward or back it yaws too...
by JustinTime
Wed Feb 06, 2013 5:09 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 616582

Re: MultiWii EZ-GUI

What I wold like to know is how to shut the annoying voice up!I couldn't fine no setting option.
by JustinTime
Fri Jan 25, 2013 5:06 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389884

Re: SW Development on Minim Osd

Hey, think again and read what I have posted. I told you I'm kind of slow! I get it now. Don't be depressed about my inability. You do a tremendous job and I can't thank you enough. http://www.jonrb.com/emoticons/clapping.gif This is to us http://www.jonrb.com/emoticons/beer.gif
by JustinTime
Fri Jan 25, 2013 5:37 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389884

Re: SW Development on Minim Osd

I think my previous posts show that I kind of don't exactly know what to do without detailed instruction. Unfortunately that includes on how to connect it to the MWii FC, Crius SE in my case. Can someone please post where to change the code in the sketches and to what and which pin on the FC to use...
by JustinTime
Fri Jan 25, 2013 2:07 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389884

Re: SW Development on Minim Osd

I think my previous posts show that I kind of don't exactly know what to do without detailed instruction. Unfortunately that includes on how to connect it to the MWii FC, Crius SE in my case. Can someone please post where to change the code in the sketches and to what and which pin on the FC to use ...
by JustinTime
Thu Jan 24, 2013 6:55 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389884

Re: SW Development on Minim Osd

As I posted on another board I had soldered a six pin header nor realizing that I could use an FTDI. I tried now with the FTDI and I still get the sync error as I posted before. BTW, I could have saved myself the trouble of the soldering but it works the same. Just un-necessery work. EDIT: Turns out...
by JustinTime
Thu Jan 24, 2013 4:41 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389884

Re: SW Development on Minim Osd

Yes, that tool works quite good. I used it to flash the ESCs with the SimonK SW.

None the less, I soldered the header and tried to flash and I get a sync error as can be seen in the attached. I have it set to the pro 5v as can be seen.
by JustinTime
Thu Jan 24, 2013 4:18 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389884

Re: SW Development on Minim Osd

Hi, that link is the User Manual for OSD software... Not hardware, if you look closer to the previous post you will see "later tomorrow" not today besides, if your clone is not equal to mine, I just don´t know! But you can send one to me and I will tell you Cheers, KV PS: The clone that i...
by JustinTime
Thu Jan 24, 2013 3:29 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389884

Re: SW Development on Minim Osd

Hi Dragu, I´m sorry but we have been working this past days on new release and I did not had time to come here. Please do not use 12v on supposed 12v side of the board, you don´t need it and I RECOMMEND NOT TO. The only thing you need to do it´s to use the two solder jumpers ( one on each side of t...
by JustinTime
Sat Jul 21, 2012 1:35 am
Forum: Shields, boards and sensors
Topic: NanoWii atmega32u4 (leonardo) FC
Replies: 52
Views: 42809

Re: NanoWii atmega32u4 (leonardo) FC

Goetz wrote:Hello mistahead,

have a Look at http://www.rc-heli-fan.org/quadrocopter ... 92355.html

There is an new bootloader, reducing time and (perhaps) getting ESC's in sync...


Isn't the bootloader for hex or oct?

Das ist nur nötig wenn ihr einen HEXA oder OCTO habt. und auch nur um auf nummer sicher zu gehen!