Search found 258 matches

by treym
Mon Apr 27, 2015 7:51 pm
Forum: Software development
Topic: Goggle Code is Shutting down.
Replies: 16
Views: 8505

Re: Goggle Code is Shutting down.

Alexinparis wrote:I really did not expect this.
So yes multiwii will move to GitHub.
I never thought I'd write this ;)


:mrgreen:
by treym
Wed Dec 24, 2014 4:57 am
Forum: Software
Topic: Baseflight aka multiwii port to stm32
Replies: 1036
Views: 2551098

Re: Baseflight aka multiwii port to stm32

My recent crash m the motors cut out all of a sudden and the buzzer went beeping in rapid fashion. is that buzzer tone indicative of something ? please help, the firmware on it was Oct 22nd official release of base flight. no motor output , rapid beep .. board was restart ? : check for bad solder &...
by treym
Sun Dec 21, 2014 3:40 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1379102

Re: Naze32 hardware discussion thread

The green light does stop flashing when I level it out! So, that's a sign that SOMETHING is working.. I tried 3 USB cables, directly connected (no USB hub) and rebooted...the computer never sees anything plugged in. I can't flash it with Baseflight firmware flasher, it's not connecting to the board...
by treym
Mon Dec 15, 2014 9:25 pm
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12858

Re: Quanton STM32F4 baseflight

hello,

the code is now on github : https://github.com/treymarc/baseflight/tree/f3f4
by treym
Sun Dec 14, 2014 9:02 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1379102

Re: Naze32 hardware discussion thread

if (feature(FEATURE_INFLIGHT_ACC_CAL)) { if (AccInflightCalibrationArmed && f.ARMED && rcData[THROTTLE] > mcfg.mincheck && !rcOptions[BOXARM]) { // Copter is airborne and you are turning it off via boxarm : start measurement you must use "boxarm" , takeoff , level ...
by treym
Sun Dec 14, 2014 8:54 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1379102

Re: Naze32 hardware discussion thread

In the chrome app baseflight, there's an option for "in-flight level calibration", can someone explain what it does and how it works? it will perfome accelerometer calibration in flight : you need to take off in acro mode you only need this option when you can not do the acc calibration o...
by treym
Sun Dec 14, 2014 5:23 am
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12858

Re: Quanton STM32F4 baseflight

Quadflyer5280 wrote:Is there an updated firmware I haven't been able to find or a way to roll back my Baseflight Configurator?


hello,

The firmware is now up to date and work with the latest version of the configurator, you can find a Hex file for the quanton :)

by treym
Fri Dec 12, 2014 11:53 pm
Forum: Boards
Topic: MultiWii on $4 STM32 maple clones
Replies: 4
Views: 2659

Re: MultiWii on $4 STM32 maple clones

STM32F103CB ARM 32-bit Cortex™-M3 CPU Core 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access Single-cycle multiplication and hardware division Memories 64 or 128 Kbytes of Flash memory you can have baseflight on this board .. just check for the amount...
by treym
Tue Dec 09, 2014 1:43 pm
Forum: Software development
Topic: Hardware in the loop simulation
Replies: 18
Views: 6629

Re: Hardware in the loop simulation

i did not see anything weird yet , i am not using the most suitable planes for acro .. will do extensive testing later

by treym
Wed Dec 03, 2014 11:16 pm
Forum: General discussions
Topic: Best way to share files?
Replies: 7
Views: 3928

Re: Best way to share files?

wiki updated
by treym
Tue Dec 02, 2014 4:36 pm
Forum: General discussions
Topic: Best way to share files?
Replies: 7
Views: 3928

Re: Best way to share files?

google drive
by treym
Sun Nov 30, 2014 11:42 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1379102

Re: Naze32 hardware discussion thread

I am just trying to understand what exactly happened, as well as predict what is going to happen in the future with this platform. please start a new thread .. this is not really about "Naze32 hardware" Just so I am clear So here we are, a huge division. One guy is a master of hardware (w...
by treym
Sat Nov 29, 2014 2:55 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1379102

Re: Naze32 hardware discussion thread

AKfreak wrote:Here is a Extremely interesting video I found with Hydra speaking (dont click away when you see the big guy and the dog, this is not Hydra (cleanflight guy). I think I will go the cleanflight route from the start. No offense to Timecop...


@hydra , nice outfit
by treym
Sat Nov 22, 2014 9:57 pm
Forum: Software development
Topic: System Identification
Replies: 5
Views: 2955

Re: System Identification

The fastest I can go asking and then getting data is ~ 0.02 seconds, aprox 50hz, which is the PERFECT sample rate to do sysid... buttttttt I need MSP_RAW_IMU as well as MSP_RC, when doing that, I got a delay between each reading of ~ 0.06 which is 16hz... and NOT GOOD ENOUGH for sysid. the idea is ...
by treym
Tue Nov 18, 2014 8:21 am
Forum: Software development
Topic: Call for robotic drone platforms for indoor commercial use
Replies: 10
Views: 4215

Re: Call for robotic drone platforms for indoor commercial u

i have no issue with that :)

the point is "calling for a drone platforms for indoor commercial" clearly stand in "General discussions".

As you just said/wrote down : this is not related to he hardware and software , so ...
by treym
Tue Nov 18, 2014 3:52 am
Forum: Software development
Topic: Ghettostation: mini antenna tracker & groundstation
Replies: 29
Views: 19359

Re: Ghettostation: mini antenna tracker & groundstation

kipkool wrote:you should add a bluetooth dongle too if you want to use your groundstation software at the same time : Wire bluetooth Tx to Xbee Rx, and BT rx to Xbee Tx.


so, if i am correct ,the groundstation has to decode ltm ?


some demo code for a droid gs with ltm support ,
by treym
Mon Nov 17, 2014 5:47 pm
Forum: Software development
Topic: Call for robotic drone platforms for indoor commercial use
Replies: 10
Views: 4215

Re: Call for robotic drone platforms for indoor commercial u

this message shall be moved into : "General discussions" .

ps : for commercial and or "global patent application to protect the I.P" please use the forum section not dedicated to coding

edit : message edited for clarity
by treym
Sun Nov 16, 2014 11:54 pm
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12858

Re: Quanton STM32F4 baseflight

there are some expérimental optimisation in the code , so feel free to report any odd behavior if you notice them ;)


edit : i am busy atm , well update code soon .. :)
by treym
Sun Nov 16, 2014 11:51 pm
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12858

Re: Quanton STM32F4 baseflight

OK, got an ST-Link V2 from digikey and got everything working. The problem I have now is that Baseflight Configurator gives an error about needing a newer firmware, 3-2.1 .... Works fine with Multiwii WinGUI 2.2 though so at least I'm flying Is there an updated firmware I haven't been able to find ...
by treym
Fri Nov 14, 2014 9:20 pm
Forum: Pictures & Videos
Topic: Mono-Phan Technology With Multiwii
Replies: 28
Views: 18113

Re: Mono-Phan Technology With Multiwii

very nice
by treym
Thu Nov 13, 2014 7:17 pm
Forum: General discussions
Topic: Major quadcopter issue, cannot diagnose
Replies: 15
Views: 4300

Re: Major quadcopter issue, cannot diagnose

Increase or decrease looptime and see. About how much? I went from the original which I think was 3500, to 3000 with no effect check the expo settings of your tx (and use the monitor fonction to check the sended value ) check the expo setting in baseflight . 4s battery +1806 2300kv : i dont know ab...
by treym
Tue Nov 11, 2014 8:13 pm
Forum: Software
Topic: Baseflight aka multiwii port to stm32
Replies: 1036
Views: 2551098

Re: Baseflight aka multiwii port to stm32

0 to+360
by treym
Tue Nov 11, 2014 8:05 pm
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12858

Re: Quanton STM32F4 baseflight

yes, i also recieved the quanton board with taulabs installed ,

i use swd and a stlinkv2 from a discovery f4 for flashing the board with baseflight, you can see then briefly on the first video .
by treym
Tue Nov 11, 2014 9:46 am
Forum: Boards
Topic: Quanton STM32F4 baseflight
Replies: 24
Views: 12858

Re: Quanton STM32F4 baseflight

How exactly do you flash the Quanton with baseflight? 1 ) using swd - HEX Firmware connect your swd debuger to the swd pin of your quanton, flash the HEX firmewar 2 ) using uart iirc , uart pins are not practical for flashing .. 3) using usb - DFU firmware this assume you have baseflight installed ...
by treym
Tue Oct 28, 2014 3:50 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31652

Re: Naze32Pro STMF3 help thread

this may require a very long answer .. :)

short answer (as of today) get a quantom .

Or uou may want to play with your disco f4 , changes are in drivers, nothing intense nor time consuming to changes or to adapte to new a scheme of coding.
by treym
Thu Oct 23, 2014 5:55 pm
Forum: Software development
Topic: Multiwii pro 2.3
Replies: 4
Views: 1888

Re: Multiwii pro 2.3

I've tried several times to upload the 2.3 sketch to my board several times , it uploads fine but when it load it on the GUI it does not show the copter is hooked up on the live graph. But it shows and reacts to stick positions , so it's not at all stable enough to get off the ground. Please help. ...
by treym
Wed Oct 22, 2014 7:33 pm
Forum: General discussions
Topic: Not getting any answers to simple serial port brd. questions
Replies: 13
Views: 4002

Re: Not getting any answers to simple serial port brd. quest

what each specific define is for and how they work. As you may have been bable to conclud : i am not rely that impacted by you thinking of me as a jerk You might also been able to conclud that you want to have your rx working first. Once your rx is working then add your gps over i2c. Go to section ...
by treym
Wed Oct 22, 2014 12:09 am
Forum: General discussions
Topic: Not getting any answers to simple serial port brd. questions
Replies: 13
Views: 4002

Re: Not getting any answers to simple serial port brd. quest

n8lbv wrote:Why did you do that?


because i dont want you to spend time and effort in vain. i posted a google query .. s

o there it is ,eeexpecialy refined for your lazynezz kingness :)

http://redigital.org/wp/hobbies/jrspekt ... i-328p-fc/


pss : ignore my tone :p
by treym
Tue Oct 21, 2014 11:16 pm
Forum: General discussions
Topic: Not getting any answers to simple serial port brd. questions
Replies: 13
Views: 4002

Re: Not getting any answers to simple serial port brd. quest

n8lbv wrote:Thanks I appreciate the help but this is not really an answer.
How do you look at the values in config
There's got to be a way to do this but nobody's been able to explain how you do it.
Know what I mean?


yes, you lazy ass ..
by treym
Mon Oct 20, 2014 8:41 pm
Forum: General discussions
Topic: Not getting any answers to simple serial port brd. questions
Replies: 13
Views: 4002

Re: Not getting any answers to simple serial port brd. quest

i assume your are using a 328p . shorst answer ->Your best option is to get a controller with an Atmega 2560, that one got 4 serial ports OR to get a i2c adapater. setting up a gps with a 328p is way harder and prone to failure than using a Atmega 2560 or a stm32 flight controler m all those point a...
by treym
Sun Oct 19, 2014 3:12 am
Forum: Software development
Topic: GPS NAV
Replies: 964
Views: 401293

Re: GPS NAV

stronnag wrote:So how much better would it be if alexinparis, eosbandi, timecop, dominicclifton et al could get together and agree:

With the combination of this message board, the wiki and IRC, it should not be this chaotic. Please.


indeed , there are people talking about such initative ...
by treym
Sat Oct 18, 2014 10:11 pm
Forum: Software development
Topic: GPS NAV
Replies: 964
Views: 401293

Re: GPS NAV

Ctn, as the author of the configurator tool I value your input with regards to MSP command and protocol direction, do you have any technical related thoughts on this? He does! but he probably won't post them here, because you'll just change all the variable names and call it your own work. hello bi...
by treym
Tue Oct 14, 2014 9:43 pm
Forum: General discussions
Topic: [CRITICAL] MultiWii jam condition
Replies: 11
Views: 3552

Re: [CRITICAL] MultiWii jam condition

artis wrote:IWhen I unplug the throttle cable (which includes the power as well) the quad goes into failsafe as it should.
When I plug the throttle/power back in it jams.


make sens to me
by treym
Sat Oct 11, 2014 7:43 pm
Forum: Links
Topic: MyMultiwii.com - Share your awesome Multiwii projects/ideas!
Replies: 3
Views: 4013

Re: MyMultiwii.com - Share your awesome Multiwii projects/id

kaizen says : you can not blame other for doing what you failed.

http://en.wikipedia.org/wiki/Root_cause_analysis

i dont see anything wrong here , .. and http://www.mydroneshow.com/ is also dead ...

one does not simply instanciate himself as a community manager , if you feel you can help , send me a pm .
by treym
Fri Oct 10, 2014 9:29 pm
Forum: Software development
Topic: MultiWii for Windows (Store App)
Replies: 6
Views: 3173

Re: MultiWii for Windows (Store App)

Android , io , windows , chrome , unix , mobil , tablette.

From beginner to experienced .

Who is not looking for quality ?
by treym
Fri Oct 10, 2014 7:23 pm
Forum: Software development
Topic: New flying android app : Flone Remote
Replies: 15
Views: 6105

Re: New flying android app : Flone Remote

re,

I mainly wish my comments where funny/wrong stuff , so i could lol and rofl...

please , at least change the font and say what msp version your are supportiing using inspiring copying from .
by treym
Fri Oct 10, 2014 7:15 pm
Forum: Software development
Topic: MultiWii for Windows (Store App)
Replies: 6
Views: 3173

Re: MultiWii for Windows (Store App)

3.14159 wrote:It's by no means intended as a replacement for MultiWiiConf, more for in the field tuning.

thanks for sharing

there is a need for third party , cause not everyone is using java ..

Please ensure that your msp implementation is freely available under gpl for review and msp compliance.

regards,
by treym
Thu Oct 09, 2014 6:57 pm
Forum: Software development
Topic: New flying android app : Flone Remote
Replies: 15
Views: 6105

Re: New flying android app : Flone Remote

Thanks mearshen. The code is already in github: github.com/aeracoop/flone For do this we port the MultiwiiConf in Processing to Android. m Please correct your stolen files or remove all the commment that you do not own. I considere your action a grave offense, failure to respect the gpl is a nogo. ...
by treym
Wed Oct 08, 2014 1:22 am
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31652

Re: Naze32Pro STMF3 help thread

Okay, read your code some, see you are using the sysclk at 72 MHz. iirc ,that hse value is also re-setted, not sure where i did that , somewheere else, but as reported from debug msp cycletime and main cpu freq is correct .. will check that this weekend but from my understanding (which obviously is...
by treym
Wed Oct 08, 2014 12:10 am
Forum: Software development
Topic: New flying android app : Flone Remote
Replies: 15
Views: 6105

Re: New flying android app : Flone Remote

.. dude , no , one can not do that. use a real phone , it is saffer and tethered
by treym
Wed Oct 08, 2014 12:06 am
Forum: Software development
Topic: Ext Mag should be compulsory!!
Replies: 8
Views: 3119

Re: Ext Mag should be compulsory!!

IMO, it all comes down to how the main power-lines are routed. sort of .. cause it is not always possible , doable or manageable to do so without changing the tradoff betwenn [insert x].. Ext Mag is compulsory for those who fit that category [insert XY]. also not a big deal when free pins (thanks t...
by treym
Wed Oct 08, 2014 12:02 am
Forum: Software development
Topic: New MSP command request
Replies: 7
Views: 3925

Re: New MSP command request

hi

ezio, send me a pm , alex you've got a email , dongs is the file still under nda ?

as i said to hydra , i mominate myself as maintenainer the doc .

++
by treym
Tue Oct 07, 2014 11:58 pm
Forum: MultiWii tweaking - flying experience
Topic: Fast settings for computer controlled quad
Replies: 12
Views: 5041

Re: Fast settings for computer controlled quad

thanks for the update , keep us informed , it is interresting to see peolple building stuff like your project.
by treym
Tue Oct 07, 2014 11:46 pm
Forum: Boards
Topic: Naze32Pro STMF3 help thread
Replies: 61
Views: 31652

Re: Naze32Pro STMF3 help thread

whatever is wrong , the comment or the doc .. the code work . i will look at it since i need adc/rssi support