MultiWii

treym

Alexinparis wrote:I really did not expect this.
So yes multiwii will move to GitHub.
I never thought I'd write this

treym

yes, it does

"set serialrx_type=4" for msp

wiki : https://github.com/multiwii/baseflight/ ... upner-SUMD

code : https://github.com/multiwii/baseflight/ ... bf3788b597

treym

http://www.multiwii.com/about/sponsors

treym

http://www.reddit.com/r/Multicopter/com ... ofs_drama/

treym

My recent crash m the motors cut out all of a sudden and the buzzer went beeping in rapid fashion. is that buzzer tone indicative of something ? please help, the firmware on it was Oct 22nd official release of base flight. no motor output , rapid beep .. board was restart ? : check for bad solder &...

treym

The green light does stop flashing when I level it out! So, that's a sign that SOMETHING is working.. I tried 3 USB cables, directly connected (no USB hub) and rebooted...the computer never sees anything plugged in. I can't flash it with Baseflight firmware flasher, it's not connecting to the board...

treym

hello,

the code is now on github : https://github.com/treymarc/baseflight/tree/f3f4

treym

if (feature(FEATURE_INFLIGHT_ACC_CAL)) { if (AccInflightCalibrationArmed && f.ARMED && rcData[THROTTLE] > mcfg.mincheck && !rcOptions[BOXARM]) { // Copter is airborne and you are turning it off via boxarm : start measurement you must use "boxarm" , takeoff , level ...

treym

In the chrome app baseflight, there's an option for "in-flight level calibration", can someone explain what it does and how it works? it will perfome accelerometer calibration in flight : you need to take off in acro mode you only need this option when you can not do the acc calibration o...

treym

Quadflyer5280 wrote:Is there an updated firmware I haven't been able to find or a way to roll back my Baseflight Configurator?

hello,

The firmware is now up to date and work with the latest version of the configurator, you can find a Hex file for the quanton

treym

STM32F103CB ARM 32-bit Cortex™-M3 CPU Core 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access Single-cycle multiplication and hardware division Memories 64 or 128 Kbytes of Flash memory you can have baseflight on this board .. just check for the amount...

treym

i did not see anything weird yet , i am not using the most suitable planes for acro .. will do extensive testing later

treym

wiki updated

treym

google drive

treym

I am just trying to understand what exactly happened, as well as predict what is going to happen in the future with this platform. please start a new thread .. this is not really about "Naze32 hardware" Just so I am clear So here we are, a huge division. One guy is a master of hardware (w...

treym

AKfreak wrote:Here is a Extremely interesting video I found with Hydra speaking (dont click away when you see the big guy and the dog, this is not Hydra (cleanflight guy). I think I will go the cleanflight route from the start. No offense to Timecop...

@hydra , nice outfit

treym

The fastest I can go asking and then getting data is ~ 0.02 seconds, aprox 50hz, which is the PERFECT sample rate to do sysid... buttttttt I need MSP_RAW_IMU as well as MSP_RC, when doing that, I got a delay between each reading of ~ 0.06 which is 16hz... and NOT GOOD ENOUGH for sysid. the idea is ...

treym

treym

i have no issue with that

the point is "calling for a drone platforms for indoor commercial" clearly stand in "General discussions".

As you just said/wrote down : this is not related to he hardware and software , so ...

treym

kipkool wrote:you should add a bluetooth dongle too if you want to use your groundstation software at the same time : Wire bluetooth Tx to Xbee Rx, and BT rx to Xbee Tx.

so, if i am correct ,the groundstation has to decode ltm ?

some demo code for a droid gs with ltm support ,

treym

this message shall be moved into : "General discussions" .

ps : for commercial and or "global patent application to protect the I.P" please use the forum section not dedicated to coding

edit : message edited for clarity

treym

there are some expérimental optimisation in the code , so feel free to report any odd behavior if you notice them

edit : i am busy atm , well update code soon ..

treym

OK, got an ST-Link V2 from digikey and got everything working. The problem I have now is that Baseflight Configurator gives an error about needing a newer firmware, 3-2.1 .... Works fine with Multiwii WinGUI 2.2 though so at least I'm flying Is there an updated firmware I haven't been able to find ...

treym

very nice

treym

Increase or decrease looptime and see. About how much? I went from the original which I think was 3500, to 3000 with no effect check the expo settings of your tx (and use the monitor fonction to check the sended value ) check the expo setting in baseflight . 4s battery +1806 2300kv : i dont know ab...

treym

0 to+360

treym

yes, i also recieved the quanton board with taulabs installed ,

i use swd and a stlinkv2 from a discovery f4 for flashing the board with baseflight, you can see then briefly on the first video .

treym

How exactly do you flash the Quanton with baseflight? 1 ) using swd - HEX Firmware connect your swd debuger to the swd pin of your quanton, flash the HEX firmewar 2 ) using uart iirc , uart pins are not practical for flashing .. 3) using usb - DFU firmware this assume you have baseflight installed ...

treym

viewtopic.php?f=8&t=3989&start=800#p57936

drawin is grumpy again

treym

darwin is pleased

treym

this may require a very long answer ..

short answer (as of today) get a quantom .

Or uou may want to play with your disco f4 , changes are in drivers, nothing intense nor time consuming to changes or to adapte to new a scheme of coding.

treym

I've tried several times to upload the 2.3 sketch to my board several times , it uploads fine but when it load it on the GUI it does not show the copter is hooked up on the live graph. But it shows and reacts to stick positions , so it's not at all stable enough to get off the ground. Please help. ...

treym

what each specific define is for and how they work. As you may have been bable to conclud : i am not rely that impacted by you thinking of me as a jerk You might also been able to conclud that you want to have your rx working first. Once your rx is working then add your gps over i2c. Go to section ...

treym

n8lbv wrote:Why did you do that?

because i dont want you to spend time and effort in vain. i posted a google query .. s

o there it is ,eeexpecialy refined for your lazynezz kingness

http://redigital.org/wp/hobbies/jrspekt ... i-328p-fc/

pss : ignore my tone :p

treym

n8lbv wrote:Thanks I appreciate the help but this is not really an answer.
How do you look at the values in config
There's got to be a way to do this but nobody's been able to explain how you do it.
Know what I mean?

yes, you lazy ass ..

treym

i assume your are using a 328p . shorst answer ->Your best option is to get a controller with an Atmega 2560, that one got 4 serial ports OR to get a i2c adapater. setting up a gps with a 328p is way harder and prone to failure than using a Atmega 2560 or a stm32 flight controler m all those point a...

treym

stronnag wrote:So how much better would it be if alexinparis, eosbandi, timecop, dominicclifton et al could get together and agree:

With the combination of this message board, the wiki and IRC, it should not be this chaotic. Please.

indeed , there are people talking about such initative ...

treym

Ctn, as the author of the configurator tool I value your input with regards to MSP command and protocol direction, do you have any technical related thoughts on this? He does! but he probably won't post them here, because you'll just change all the variable names and call it your own work. hello bi...

treym

artis wrote:IWhen I unplug the throttle cable (which includes the power as well) the quad goes into failsafe as it should.
When I plug the throttle/power back in it jams.

make sens to me

treym

kaizen says : you can not blame other for doing what you failed.

http://en.wikipedia.org/wiki/Root_cause_analysis

i dont see anything wrong here , .. and http://www.mydroneshow.com/ is also dead ...

one does not simply instanciate himself as a community manager , if you feel you can help , send me a pm .

treym

Android , io , windows , chrome , unix , mobil , tablette.

From beginner to experienced .

Who is not looking for quality ?

treym

re,

I mainly wish my comments where funny/wrong stuff , so i could lol and rofl...

please , at least change the font and say what msp version your are supportiing using inspiring copying from .

treym

3.14159 wrote:It's by no means intended as a replacement for MultiWiiConf, more for in the field tuning.

thanks for sharing

there is a need for third party , cause not everyone is using java ..

Please ensure that your msp implementation is freely available under gpl for review and msp compliance.

regards,

treym

Thanks mearshen. The code is already in github: github.com/aeracoop/flone For do this we port the MultiwiiConf in Processing to Android. m Please correct your stolen files or remove all the commment that you do not own. I considere your action a grave offense, failure to respect the gpl is a nogo. ...

treym

Okay, read your code some, see you are using the sysclk at 72 MHz. iirc ,that hse value is also re-setted, not sure where i did that , somewheere else, but as reported from debug msp cycletime and main cpu freq is correct .. will check that this weekend but from my understanding (which obviously is...

treym

.. dude , no , one can not do that. use a real phone , it is saffer and tethered

treym

IMO, it all comes down to how the main power-lines are routed. sort of .. cause it is not always possible , doable or manageable to do so without changing the tradoff betwenn [insert x].. Ext Mag is compulsory for those who fit that category [insert XY]. also not a big deal when free pins (thanks t...

treym

hi

ezio, send me a pm , alex you've got a email , dongs is the file still under nda ?

as i said to hydra , i mominate myself as maintenainer the doc .

++

treym

thanks for the update , keep us informed , it is interresting to see peolple building stuff like your project.

treym

whatever is wrong , the comment or the doc .. the code work . i will look at it since i need adc/rssi support

Search found 258 matches