MultiWii

I have an Esky 4 chan (modded to 5 chan) TX with an esky 6ch RX and it works.

I saw a video of someone flying this frame. He lost controlled at about 1m above the ground and one arm was broken. It seems pretty cheap.

There's two way, with a prop saver and with a prop adapter.

In this item, you get both, they are for the KEDA motors.
http://www.hobbyking.com/hobbyking/stor ... Pack_.html

The blue part with the O-Ring is the prop saver.
The biggest chrome part with the nut is the prop adapter.

You can use a T-Reamer to enlarge the hole in the prop.

EPP 10x4.5

Just bought 8. Will see how long it takes and if they are genuine.

http://www.ebay.ca/itm/150594622496?ssP ... 804wt_1139

:D im sure you had a feeling this was gona be coming but first crash / hard landing its gona break. but hey why the heck not Had a nice flight this afternoon. Ended in a crash. 3 broken props, battery went the hell away but the frame is intact. Now, these EPP10x4.5 are getting expensive at 5$/pair ...

Balsa is pretty strong. I did not tried a free fall from 10m yet . I've broken a couple of props, crash upside down, plant one arm in the grass. It's still in one piece.

Here's the spec: -Balsa wood frame -Keda 20-28M http://kedamodel.com/product/a20m.html -8x4 prop from HK http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11321 -10x4.5 EPP on it's way -Genuine/Original WMP+ -BMA180 -HK SS 25-30A http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idPr...

Are you sure your props a rotating on the right side?

How did you mount your motors?

Do I have to uncomment something in the code to use a BMA180, Pullups?

Hi,
yes, I found them on ebay from a shop in Ontario.

Thanks.

Didn't know that! Actually my QuadX is not ready yet, still at the "Ordering" step.

Good to know!

Alright thank you.

I will follow Berkely wiring diagram. Now I just need to order a BMA180 and some LM1117.

Where can I find a LM117. I'm in Canada. I can order them from DigiKey Canada but for a couple of tiny regulator it's like 8$ shipping...

Hey guys! I've been looking everywhere for a wiring diagram for a ProMini, WM+ and a BMA180 without a Paris Board. I have found a wiring diagram from Barkely for a ADXL345 m I know I need a LLC for the BMA180. Do I connect it like a ADXL345 and is the LM1117 required? Why does he connect the LC from...

I heard that it's better to power the Arduino board from the receiver. You take a red wire from a use channel. This way, you will have a fail-safe function. If the RX gets in Fail-Safe mode, it will shut down the arduino board and your motors. If you power the Arduino directly from the ESC-BEC, even...

What do you guys think of these:

Motor: FC28-22 12kv
ESC: Turnigy Plush 25A
Props: GWS-DD-8040 203x102
Batt: Turnigy 3000mAh 20C

No yet. I'm planning everything.

So basically you have this:



Do you plug all 4 ESC in series or in parallel?

Ok thank you!

So you swap the + and - from the motors. Do you still use CCW props?

Hi, I'm really new to all this. I never had a brushless motor and ESC before. I want to build a QuadX but I'm not sure how to connect the ESC and the RX. http://static.rcgroups.net/forums/attachments/2/6/7/7/0/3/a3627791-98-quadX.jpg?d=1291037190 Questions: 1. According to this image, does it means ...