MultiWii

Just looking quick at the specs page, SIRIUS_AIR_GPS might work for you. I would be careful to validate the direction via the gui before you try to fly.

Hi guys. Is this still valid for uBlox GPS from rctimer v2? from config.h file MWii v2.2 - UBLOX - U-Blox binary protocol, use the ublox config file (u-blox-config.ublox.txt) from the source tree Thanks. EOSBandi neighbour pliz help me with this answer. Yes, that's probably still true. From within ...

May not be related but mine does this too if I have any GPS related modes on...

BAHhhhh... Sorry sorry... I just realized a typo... The second i2c_readAck() should have been a i2c_readNak() otherwise it may cause problems... I revised my post above... This is the section I changed if you already committed it. //GPS_ground_course varptr = (uint8_t *)&GPS_ground_course; *varp...

I was tinkering with the code today and added the remaining code to support Sonar from the i2c-gps-nav "coprocessor". Works well for me. If someone that has access wants to review and commit it, that'd be swell... This is based off of the most current version of i2c-gps-nav. I've added a f...

For the sake of completeness in this thread, my setup is very generic: Flying Robot X550 frame NTM Prop Drive 28-36 750KV motors SUNSKY-ONLINE 10x4.5 nearly indestructible cheap props (Need some balancing, cheap, chinese but I've yet to break one) Turnigy Plush 30A ESCs 2200 Mah 25C battery So after...

So what I also don't understand is that I can turn my P all the way up to 20.0 and I really don't get much vibration at all.. It just acts like the controls are very slow to react when I'm flying. Still, when going forward in flight it oscilates some. I turn P down to 2.8 and it oscillates slightly ...

Hi folks, was hoping I might get a little advice on possible tuning options for my quad... I have read all the basic stuff and still kinda clueless why my quad is acting a little strange. My setup 550mm quad with NTM 750kv motors. These motors might be a tad big if that's possible. So, I've tried 12...