MultiWii

oh yeah, mincommand right. pretty much any BT adapter should work. Speaking of BT adapters, I went to solder a set of pins to the RX/TX points on mine and found the holes far too small to insert a set of standard header pins. Is there a smaller set of pins the holes are intended for? I'd rather not...

capacitor. If you put 12V into it, you probably smoked 3.3V line, which means everything is dead. If you just knocked it out, it's the bypass cap for baro, so probably no difference in performance. Thanks TC! Not real good at identifying SMT components. It was 5v and the board seems to still functi...

What would the effect of damage to the capacitor circled in the image below be? I think I may have accidentally let some of the magic smoke out today while testing a new wiring harness...



-K

Has anyone used on of these Bluetooth modules with a Naze32? And if so, any advice for getting one hooked up and working?

http://www.rctimer.com/index.php?gOo=go ... oductname=


-K

Thanks Sebbi!

-K

GUI Update on my systems with r964 64 Bit Gui on Windows 7 Pro 64bit, Java 7 (32 & 64 versions installed) - Still will not run. Now get the grey fullscreen box, nothing else. Stop button does not work, have to force close. 32 Bit Gui on Windows 7 Pro 64bit, Java 7 - Continues to run fine, the fu...

Does the #define MAG_DECLINIATION conditional in the GPS section of config.h have any effect if you're not using a GPS? i.e. Does it affect the regular magnetometer readings? I've noticed that my compass readings on the board seems to be about 10-15 degrees off and the magnetic declination for my lo...

Hi Alex, unfortunatly, the gui is not working well for me. The AUX checkboxes and RC data bargraphes doesn't display on the screen on my PCs under XP 32 bits ( the same with Ubuntu), always black boxes. Is there a solution ? All MWConfs till dev20120605 worked well. What is the matter ? I am having...

Pyrofer wrote:Check out the new Java MwGUI in another thread here, its quite good and should get you by.
Progress is rapid and I have no problems running it.

The project is here,
https://github.com/treymarc/mwi-swing

Thanks Pyro, I'll have a look at it.

-K

can you try with the demo from : m if they do not work , you have a 3d incompatibilities will not help any further They work just fine, thank you. The dev version of the conf program still does not. When something stops working on a dev version of a program and nothing has changed on the machine, i...

Those are a new version of the KK board, jointly developed by HK and the original KK inventor.

-K

Dropping the Hardware Acceleration to one notch up from off (to Basic only) gets the conf program working, but I don't consider this an acceptable solution. It works with full acceleration in the 2.0 code. That tells me somebody changed something they shouldn't have in the Dev releases. Anyone know ...

I have two machines I'm currently using, one a Windows 7 Pro (64bit), the other Windows XP Pro (32bit). The exact same copy of the MultiWiiConf Dev 32 bit version (as in, same removable drive) runs perfectly on the W7 machine, but on the XP machine the upper right box with the channels does not show...

You can find the refereces in the Faq. http://www.multiwii.com/faq#How_should_be_the_sensor_axis_directions I had already looked at that, but that just tells me how the sensors should behave, it doesn't tell me how to modify the defines to account for a change in board orientation. I know I need to...

Won't that cause problems with motor control? The quad itself is an X quad, I just need to be able to mount the board 45 degrees clockwise from "normal". KK boards are mounted "point forward" and I need to be able to mount the MW where a KK was.

-K

Hello all, I just received a MultiWii 2012 board (The one Terri Wang sells on eBay). I'm switching from a KK board and, rather than completely rebuild my quad (ESC wiring to the power board is just long enough for the current "diamond" orientation of the KK setup), I want to run the board ...

Arf wrote:Never heard of ZMR are you sure you have that right?

Link please.

http://www.ebay.com/itm/Newest-MWC-Mult ... 3cc5ee96db

Check the photos, it's on both sides of the board. About half the stock on eBay is this board.

-K

I'm looking to pick up a Multiwii SE off of eBay and the two I see (mostly) being sold are the Cirus labeled and the ZMR labeled. I've seen a couple of threads on the Cirus, but nothing on the ZMR. Both are running about the same price, but most of the ZMR brand sellers seem to be including a FTDI p...