MultiWii

Maybe the other model requires less amps.
The battery could be under powered for this model

I use a bt module as well, pluged it in the usb, powered the 5 v and had no issues. Serial has to flavours (probably more) 5v (normal pc) signal and 3v (ttl ) signal. 5v on the data lines would kill the 3v naze. Since it worked before we can assume you had a 3v ttl module. Since the Naze died i woul...

Hi Guys! Sorry for noob question. How can i change motor direction in CLI for QuadX mixer??? I have frame, which has opposite rotations, and all wires are soldered, shrinked, shortened, so no joy to rewire. You could mount the motors facing downward. Or as others have said, use different ESC firmwa...

Yes,
The servo on a tri responds to movement and yaw stick input.
If you have an issue arming through yaw (because the prop could hit the grass) use retarded arm feature then you could use the other stick to arm

Some controllers have software to switch rotation.
If not resolder 2 wires per motor

12:36:59 -- Running - OS: Windows, Chrome: 34.0.1847.116, Configurator: 0.30 12:37:03 -- Serial port successfully opened with ID: 1 12:37:03 -- Unique device ID received - 0x674ff515750725087064519 12:37:03 -- Firmware Version: 2.3 12:37:07 -- Serial port successfully closed 12:37:17 -- Failed to op...

I have some issues on flashing the device. I use hercules to setup the bootloader, all three leds are on, close hercules, start flash loader demonstrator and it gives me an unrecognised device. I used the bootloader pads, got a solid blue led and the same error. the unit is a naze32 rev5 full versio...

Hi, I have a serial gps (ublox neo6) connected to port 3 and 4 of the naze32 (full version rev5) to the serial port in the center of the board I have a bluetooth dongle (also serial). the gps only works if bluetooth is disconnected. with both connected bluetooth will work, however using the usb to c...

nope me neither, if a chinese company says five and the manual says one, always take the lowest. is the gps chip mt3339 the important part ? m shipping price is not worth it tough, but maybe there are others. adafruit has one m (claims to be altitude unlocked) still not sure if I want to spent 30 eu...

Maybe this one can be set to 10hz

$14.90 gps http://www.dealextreme.com/p/eb-365-gps ... 045?item=2

specs
http://www.google.co.uk/url?sa=t&rct=j& ... kg&cad=rja

has an i2c line some say it doesn`t have an antenna !!!

but my knowledge is not sufficient to check this

I have a usbavr I wanted to program my escs however they are sil based
Also ordered 4 sonars and 5 atinys so I can f#%kup 1 in the worst. Now I just need the caps and maybe a led indicating it is on.
Will post my experience when done
Any idea for a cheap(but decently working) gps ?

just ordered the 2313

It`s cheaper to accept the 20 euro fee from mousser than driving to the border.
why is it so hard to find a cheap part for a reasonable price

can`t find a 4313 on ebay either
http://www.ebay.nl/sch/i.html?LH_PrefLo ... p=15&_sc=1

do I only need the 100uF cap or also other resistors ? going to use on a crius se board ?

the search continues

found some for 1.22 http://nl.mouser.com/Search/ProductDeta ... CIeQ%3D%3D
only charges 20 euro handling fee

on ebay I can only find the 2313 with 2 - 3 euro shipment costs just bought the http://www.ebay.com/itm/ws/eBayISAPI.dl ... SS:US:1123 for cheap

I will check your link
thanks
Daniel

Will this atiny work?

http://iprototype.nl/products/component ... iny45-20pu

Daniel