Search found 48 matches

by skytor
Thu Nov 07, 2013 10:43 am
Forum: Software development
Topic: V2.2 - ACRO PID implementation is wrong, right?
Replies: 282
Views: 183004

Re: V2.2 - ACRO PID implementation is wrong, right?

Hi @All

@Hamburger ... I used the 2.3 relase Kandiat (r1604)...
Mega Flyduino Megaboard (ATmega 2560) with Freeimu 0.43 on HEX6 config ;-)

@-ralf- test start today evening .. thanks !! results come tomorrow :-)

read you all tomorrow bye
by skytor
Tue Nov 05, 2013 8:26 pm
Forum: Software development
Topic: V2.2 - ACRO PID implementation is wrong, right?
Replies: 282
Views: 183004

Re: V2.2 - ACRO PID implementation is wrong, right?

Hi at ALL Horizont mode ""broken"" ? I used the 2.3 relase Kandiat (r1604)... Mega Flyduino Megaboard (ATmega 2560) with Freeimu 0.43 on HEX6 config with #define PID_CONTROLLER 2 no I2C error nothings all PID setting standart nothings changed Angel Mode works ""normaly&...
by skytor
Sat Sep 29, 2012 9:42 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi Jan

i have define nothing ! Rushduino use the same "comands" as the Multiwii GUI ... you are shure to use the right connections ?? and the correct baud rate/com port (ftdi port) on Multiwii ?

regards thorsten
by skytor
Tue Sep 25, 2012 12:31 pm
Forum: Software development
Topic: Missing ACC and other functions in MWC
Replies: 7
Views: 2375

Re: Missing ACC and other functions in MWC

Thanks Mis for this information :-)

next i must shrink or eleminate the bootloader of my leonardo .. the new r_1129 is to big with define baro funktion :-( over 30.000 ... max (with booloader) is around 28.000

regards thorsten
by skytor
Mon Sep 24, 2012 8:44 pm
Forum: Software development
Topic: Missing ACC and other functions in MWC
Replies: 7
Views: 2375

Re: Missing ACC and other functions in MWC

Hi

i test for a minute MultiWii 2.1 YES i see ACC .. Only on r_1129 is see ANGEL HORZONT etc

and GPS HOME goes green only if you have a GPSfix .. no fix no home :-)
by skytor
Mon Sep 24, 2012 8:40 pm
Forum: Software development
Topic: JavaGen-F malware in RXTX lib.
Replies: 1
Views: 1079

Re: JavaGen-F malware in RXTX lib.

Hi

my Avira Pro say all versions from 1.8 to aktual r_1129 all clean

regards Thorsten
by skytor
Mon Sep 24, 2012 8:33 pm
Forum: Software development
Topic: dev r1129 is too large :(
Replies: 13
Views: 4448

Re: dev r1129 is too large :(

Hi doughboy maybe ICSP is a way .. but 1.) MicroWii (Leonardo) have Onboard FDTI (and i like to use this) 2.) MultiWii normal way ist to work with FTDI upload 3.) most people dont have the hardware / skill level make updates via ICSP thanks for the idea ... but i think thats not the normal way für M...
by skytor
Mon Sep 24, 2012 8:27 pm
Forum: Software development
Topic: Missing ACC and other functions in MWC
Replies: 7
Views: 2375

Re: Missing ACC and other functions in MWC

Hi

same screen here ... i think we need a ""manual"" or FAQ file ... its not a bug .. its a feature ?????

regards THorsten
by skytor
Mon Sep 24, 2012 10:43 am
Forum: Software development
Topic: dev r1129 is too large :(
Replies: 13
Views: 4448

Re: dev r1129 is too large :(

Hi @ALL

same here on MicroWii.. ATmega32u4 Based 10DOF FC

i must deaktivate the barolevel sektion ... then it ""works"" but the PIN assignment are confused ... and some new (not understanding ) things in GUI :-(
by skytor
Mon Sep 24, 2012 7:14 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi Itain

Code looks nice ... but no hardware to test :-( .. must wait that my Arduino Leonardo are airborne ....
by skytor
Sat Sep 22, 2012 10:13 pm
Forum: Software development
Topic: MultiWii_dev_r1129 to big for Arduino Leonardo ?
Replies: 2
Views: 1238

Re: MultiWii_dev_r1129 to big for Arduino Leonardo ?

Thanks Patrik compile work .... but the copter works very crazy ... AUX works normal (for ARM funktion) in GUI all rc channel works normal also all sendor directions ... in ARM modus (minthrottel all motors) the motors flickers and stopp vor maybe half a second (no the min rpm is not to low) ... and...
by skytor
Sat Sep 22, 2012 9:37 pm
Forum: Software development
Topic: MultiWii_dev_r1129 to big for Arduino Leonardo ?
Replies: 2
Views: 1238

MultiWii_dev_r1129 to big for Arduino Leonardo ?

Hi @All today i like to test the new MultiWii_dev_r1129 on my Arduino Leonardo (MicroWii.. ATmega32u4 Based 10DOF MultiWii from m) BUT in config.h i ONLY define -> #define QUADX and #define MICROWII not more an get this Sketch to big -> 30.488 Bytes maximum on Leonardo is 28.672 Bytes any suggestion...
by skytor
Tue Sep 18, 2012 8:25 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Okay .. i ZIP all in one file ... an post the link .. hope so tomorrow

Thorsten
by skytor
Mon Sep 17, 2012 4:34 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

I have see (with my eyes) Johny yesterday. I know he face a lot of proplem in the last couple of month.. Hi ... next time you see him .... send him greetings from germany all good thinks ... and for the rest ... is it a option then i make a dowloadarea of my aktual working setup ? (on v1.2 board pa...
by skytor
Wed Sep 12, 2012 1:06 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi JohnyGab, Can you make a simple stock Multiwii 2.1 file that work with the Rushduino OSD.. ? So we can all start from there. Thanks for a fast answer Eric Nantel DiaLFonZo-Copter info@dialfonzo-copter.com I think it is a long time to wait ->> JohnyGab Last visited:Tue Jul 24, 2012 but the idea i...
by skytor
Mon Sep 10, 2012 9:36 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Thanks skytor, if yours works with a Rushduno v1.2 board and Multiwii 2.1 maybe I just need to get a Rushduino 1.2 board and try that. Tried everything else. Hi if you have Board 1.2 or 1.1 it is not possible ... the basic funktion are the same ... also the communication to MultiWii ... you have on...
by skytor
Sun Sep 09, 2012 9:01 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

The changes on the PID are me trying to change the value with the TX yaw stick. I am using Multiwii 2.1 but tried version 2.0 same thing. Thanks Hi if you have the SAME problems with MultiWii 2.0 AND 2.1 you have a basic comunication problem ... the MultiWii 2.o have a complet diffrent protokoll to...
by skytor
Fri Sep 07, 2012 7:43 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi jsflyrv I see some diffrences (i have OSD Version 1.2) 1.) no brocken circles next to the timer on the lower right corner 2.) the change on PID / ROLL 38..39..40 come without you do anything ?? is it possible to send me your OSD """software""" to doublecheck it on th...
by skytor
Fri Sep 07, 2012 1:01 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi not supported ?? why ?? the Basics work fine ... and ( i think) the rest is open source ... an goole code say ""BETA 0.7"" and you see ne version comes all 2 ... 3... 4 ...5 ... weeks it is many work and time to test ""all"" configurations with ""...
by skytor
Wed Sep 05, 2012 12:30 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

btw, DiplayPIDConfigScreen(); will never run due to ConfigMode is never set to 1. ConfigMode is commented out where stickinputs are checked. //ConfigMode = 1; After uncommenting ConfigMode = 1 the PID menu is possible to enable with stick input. Hi this is the point you must change on the code to a...
by skytor
Tue Sep 04, 2012 8:27 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi @ALL dont forget !! it is NOT PLUG AND PLAY ... Hi jsflyrv and kone read the full thread ... you must change a little in the code to access the PID menue AND 1.) tempreading is onboard (new version of the board) 2.) ACS715 current sensor works on the CURRENT INPUT off the new rushduino board i us...
by skytor
Fri Aug 31, 2012 8:44 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi jy0933

it works :-) BUT i dont use it ;-) .. to many information on screen for me ;-)
by skytor
Fri Aug 31, 2012 12:21 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

i'm really looking forward to using this osd for my fpv rig.. But im totally confused with the components and features that it provides and I need... there are info all around the places. a neat PDF might help out a lot my req: 1. basic osd stuff.. 2. gps (it seems possible to pull gps data from fc...
by skytor
Wed Aug 29, 2012 5:19 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi @all

ill be back in germany ... sorry for my delay to debug the osd soft !!


AND the youtube link works fine on my samsung s3 cellphone via umts

regards thorsten
by skytor
Fri Aug 24, 2012 9:54 am
Forum: Ideas
Topic: Binding Spectrum SAT via Mega Board ?
Replies: 2
Views: 1688

Re: Binding Spectrum SAT via Mega Board ?

THANK YOU :-D
by skytor
Tue Jul 31, 2012 9:14 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi .. ... update for the GPS Modul (10 Hz 115kBaud Typ FMP04/Media TEk MT3329 WAAS enabled Firmware)... noting diffrents for the OSD .. only diffrent number ... befor 11 an 12 ... now 8 and 5 (testet NOT at the same place maybe only diffrent position) ... ich think i musst search on the code to look...
by skytor
Tue Jul 31, 2012 5:18 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

really strange !!! you never have the arrow ???? I don't have this bug. Try to reload the mcm file Hi I have arrows in all direction BUT NOT backwards (i see 11) an in 5 a clock postion (i see 12) and (is it a bug ?) the altitude show when not armed show 23865 meter today i found an update for my G...
by skytor
Tue Jul 31, 2012 1:46 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi @ ALL

for some one who want to see how it works (inklusiv HomeArrow ""BUG"" )

https://www.dropbox.com/s/e7awp68mxbngjx1/2012-07-30%2021.22.16.mp4 smal part of the FIRST !! flight off Iain from Irland
by skytor
Mon Jul 30, 2012 5:11 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

BUG LIST : - PID menu, impossible to go in - confirmed - Home arrow, down position we see niumber 11 - to confirm - Amperage sensor, to test (skytor code) - Sencond batt - to implement (skytor code) Hi - PID Menu (after Update config.h) impossible to go (SORRY i used normaly my android phone) - Hom...
by skytor
Sun Jul 29, 2012 9:12 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

testflight today ... bad news ... the Arrow (way to home) works .. let me say 99% ... in the down position (on screen) is not an arrow .. i see the number 11 and not the arrow .. .. the other direktions i see the correct symbol ... the rest of the ""flight mode"" works .. regards...
by skytor
Sun Jul 29, 2012 12:14 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi @ALL in preparation for the testflight tomorrow ... i found some problems 1.) amperage sensor all tIme show -80A (solved) -> #define AMPRERAGE_OFFSET -> first it produced an compile error ( solved ) -> second time by compiling it a message apears the parameter always written (also soved) -> i thi...
by skytor
Fri Jul 27, 2012 10:16 am
Forum: Ideas
Topic: Binding Spectrum SAT via Mega Board ?
Replies: 2
Views: 1688

Binding Spectrum SAT via Mega Board ?

Hi @All

IDEA

binding spectrum sat receivers via Multiwii soft ... ??? is it possibil to do ??


regards thorsten
by skytor
Fri Jul 27, 2012 9:21 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Bledi wrote:yes for donation you can send I at my adress :)
Can you test the arrow of direction to home, I am not sure it's ok and I can't test this week



1.) youre Adress -> PN to me

2.) Arrow testing -> may be today ... or this weekend .. no problem
by skytor
Wed Jul 25, 2012 7:14 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Many THANKS for the ne OSD Version !!!

works fine ... Video Source GoPro Hero HD (R5 PAL Resolution) only upload the new MCM Table .. followed by the Rushduino Code ... plug all togther an Lights On :-) VERY NICE WORK !! There is the DONATION Button ??


fly video follows on weekend
regards thorsten
by skytor
Wed Jul 18, 2012 9:09 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

YES :mrgreen: I use PAL settings ;) *lol
by skytor
Wed Jul 18, 2012 7:10 am
Forum: Getting Started - MultiWii config and setup
Topic: Do I need anything else?
Replies: 6
Views: 2727

Re: Do I need anything else?

hi from europe :-)

i think you have all you need :-)

an the LED voltage alarm in always in the multiwii code integrated ... a smal transistor (i used a mos-fet smd) is needed to drive the current of the LED´s (LED Strips)

Regards
Thorsten
by skytor
Tue Jul 17, 2012 7:43 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi

MultiWii 2.1 is airborne and works fine ... now i am waiting for OSD *smile :mrgreen:
by skytor
Tue Jul 17, 2012 10:43 am
Forum: Software development
Topic: MultiWii release 2.1 is here :)
Replies: 52
Views: 46623

Re: MultiWii release 2.1 is here :)

Hi ! and many Thanks for 2.1Version i have my airborne today ... all works great for testflight is used the standard PID setting i changed NOTHING ! an it works fine inklusive the Failsafe Hardware Flyduino MEGA Flight Controller CPU Board (ATMEGA 2560) IMU Freeimu 0.4.3 10DOF ( MPU6050 Gyro/ACC- HM...
by skytor
Mon Jul 16, 2012 8:01 pm
Forum: Software development
Topic: MultiWii release 2.1 is here :)
Replies: 52
Views: 46623

Re: MultiWii release 2.1 is here :)

Hi @ALL thumbs UP to the "Update Crew" nice work to TOM the failsafe works 100% fine ( i used a 7 Channel M-Link Multiplex Receiver) ... normal i must DISARM + Throttel LOW to reaktivate the kopter ..... I think your receiver have a internal failsafe .. and the kopter ""see"...
by skytor
Wed Jun 20, 2012 7:22 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Does your arrow point home correct skytor? Curious if my setup got probs, or the OSD isn't working as it should. My arrow isn't reliable when flying. Doesn't point to home, although home is set when gps finds its satellites, alt and distance from home set is working, locking at 7-11 sat (mostly 9-1...
by skytor
Tue Jun 19, 2012 9:17 pm
Forum: Shields, boards and sensors
Topic: IMUs - so many choises
Replies: 7
Views: 2565

Re: IMUs - so many choises

if you have the original peace -> http://viacopter.eu/index.php?page=shop ... &Itemid=53


test http://www.microcopters.de/artikel/das- ... reeimu-v04

for the code peaces you search follow the software links on the artikel
by skytor
Tue Jun 19, 2012 9:09 pm
Forum: Software development
Topic: Gimbal servos go haywire at power up
Replies: 1
Views: 674

Re: Gimbal servos go haywire at power up

hi gutman my gimbal servos (Graupner C557) ""jumps"" 10 ~15° on startup .. not all times and not all time to the same direction an that on 2.0 ... an all newer dev version the same ... setup is Xquad Mode + free imu 0.4.3 + serial GPS on Flyduino MEGA Flight Controller (ATMEGA 25...
by skytor
Tue Jun 19, 2012 9:02 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi Haydent the ATMEGA328P and the MAX7456 are fix mounted on the rushduino board .. there is nothing that can change on the hardware easy the only problems (for me) 1) the ""bug"" on startup -> rushduino goes to the setup menu ( arm the motors an you jump to the ""fly m...
by skytor
Wed Jun 13, 2012 8:37 pm
Forum: Software development
Topic: WinGUI 2.1 Beta is released for testing
Replies: 96
Views: 29165

Re: WinGUI 2.1 Beta is released for testing

Hi EOSBandi

Thups Up !!! VERY NICE WORK !!
by skytor
Wed Jun 06, 2012 9:05 am
Forum: ESCs, propellers , servos and radios
Topic: New flyduino ESC (tmotor) 400Hz
Replies: 3
Views: 2287

Re: New flyduino ESC (tmotor) 400Hz

Hi

then you wait 2 .. 3 Days ... i can tell you ... i have the t-motors 18A 400 Hz @home but not tested yet ... i want to do it in the next days :-) ...


by skytor
by skytor
Tue Jun 05, 2012 5:07 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi Johny

i say only THUMBS UP ... great work ... and the ""PID at start bug"" yes i see it .. but .. one short arming the copter and i am on ""normal"" screen mode ... PROBLEM ? no .. it works

bye Skytor
by skytor
Wed May 30, 2012 7:36 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

Hi Katana

i use PAL video standard ... also in software
by skytor
Tue May 29, 2012 5:27 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 244649

Re: Rushduino OSD - Multiwii based open software osd

hi @all hi katana i have exact the same vido problem the camera is a GoPro Hero HD ... i fixed my problem on the V1.2 Board i lower the resolution .. the problem i have only @ 1080p/30fps 960p/30fps 720p/30fps no problem i have @ 720p/60fps an WVGA/60fps i think the MAX have problems to Handle highr...