Search found 73 matches
- Mon Feb 24, 2014 4:45 pm
- Forum: Ideas
- Topic: redundant Fc?
- Replies: 8
- Views: 4048
Re: redundant Fc?
Yes, its good idea. MK just have this feature m The redundant only FC is still have high risk the quad fall, need all the component must be redundant. Most of the problem is motor, EsC and battery in my experience. Its expensive make redundance FC for just hobby, but there is a good approach to avoi...
- Sat Dec 21, 2013 7:22 am
- Forum: Frames
- Topic: Dji phantom frame for MWI
- Replies: 2
- Views: 2364
Dji phantom frame for MWI
I tried many frame, 350, 450, 550 and bigger with MWI, AQ, MK, WKM, APM. From all size of frame i build, finally i often and i like 350 size with MWI the most. Its very stable and if its crash i feel not too hurt because its cheap and with this size its very portable and easily to find the casing/bo...
- Fri Sep 13, 2013 5:45 pm
- Forum: Ideas
- Topic: HOTT Telemetry integration
- Replies: 63
- Views: 36637
Re: HOTT Telemetry integration
Hi,
Anyone who can modify the hott telemetry code for 2.2 ?
Thanks,
John
Anyone who can modify the hott telemetry code for 2.2 ?
Thanks,
John
- Sun Aug 25, 2013 3:50 pm
- Forum: Ideas
- Topic: Multiwii NanoWii as IMU for Balancebot
- Replies: 4
- Views: 2551
Re: Multiwii NanoWii as IMU for Balancebot
This is interesting balance robot project and they have ported the code to arduino.
http://blog.tkjelectronics.dk/2012/03/t ... ing-robot/
So far i see the most stable small balance robot. I hope someone can port it to common multiwii FC such as hobbyking MWI lite.
John
http://blog.tkjelectronics.dk/2012/03/t ... ing-robot/
So far i see the most stable small balance robot. I hope someone can port it to common multiwii FC such as hobbyking MWI lite.
John
- Fri Jun 21, 2013 9:58 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii EZ-GUI
Hi Ezio,
This is what im waiting for. Way point on MWI. I hope it also has not only way point (gps coordinate) but with : altitude distance (baro), facing to which direction (compass) and how long it stay, for each way point. Its like mikrokopter (MK) does.
Thanks,
John
This is what im waiting for. Way point on MWI. I hope it also has not only way point (gps coordinate) but with : altitude distance (baro), facing to which direction (compass) and how long it stay, for each way point. Its like mikrokopter (MK) does.
Thanks,
John
- Mon Jun 17, 2013 8:30 pm
- Forum: Ideas
- Topic: HOTT Telemetry integration
- Replies: 63
- Views: 36637
Re: HOTT Telemetry integration
Hi,
I hope it will add it to config.h.
John
I hope it will add it to config.h.
John
- Fri May 03, 2013 4:40 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii EZ-GUI
Hi Ezio,
How to make change the map into satelite map at dashboard 3 ?
Thanks,
John
How to make change the map into satelite map at dashboard 3 ?
Thanks,
John
- Mon Apr 29, 2013 2:47 pm
- Forum: Software development
- Topic: What makes Naza 'better' than Multiwii
- Replies: 83
- Views: 31839
Re: What makes Naza 'better' than Multiwii
Its simply answer, choose naza if you dont want learn more about multirotor. Just want to simply "plug and fly toy" hover. With Multiwii beside its using cheap hardware (thanks to alex and all contributor programmer team), its very stable hover and i never change the stock PID setting in a...
- Mon Apr 08, 2013 3:43 pm
- Forum: Software development
- Topic: MultiWii roadmap for 2.3
- Replies: 62
- Views: 22136
Re: MultiWii roadmap for 2.3
I wish Hott feature be implemented in 2.3 as it available on 2.0 and running perfect.
viewtopic.php?f=7&t=1284
viewtopic.php?f=7&t=1284
- Thu Mar 21, 2013 6:32 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii EZ-GUI
Hi Ezio, I understand the effort is not easy, i hope more android coder willing to support develop this app. do you have plan to make this app support mavlink? and maybe you make two version of this app, paid version with mavlink (compatible with MWI, autoquad and APM) and opensource version just fo...
- Wed Mar 20, 2013 8:52 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii EZ-GUI
I have several DIY multirotor even DJi and MK, But from all, I like MWI (the most active forum and stable), Autoquad (the most accurate platform) and APM2.5 (arduino base and many features), last two using mavlink, but no from them has app as good as yours. So, I think it will be more stronger if th...
- Wed Mar 20, 2013 8:38 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii EZ-GUI
Hi Ezio,
This app make me buy new android phone, i really love this app, i thank to you for your great job.
If you can port this app to IOS iPAD/iphone, i might the first person buy the app.
John (wahyu)
This app make me buy new android phone, i really love this app, i thank to you for your great job.
If you can port this app to IOS iPAD/iphone, i might the first person buy the app.
John (wahyu)
- Wed Mar 13, 2013 3:27 am
- Forum: Ideas
- Topic: HOTT Telemetry integration
- Replies: 63
- Views: 36637
Re: HOTT Telemetry integration
Hi Sebbi, I have both frsky and graupner Hott MX transmitter. Hott more simple, the transmitter display can show the telemetry without any additional module. You can see my youtube above, it works perfect with 2.0 using the code from "oli" see above. I think from his code you just make cha...
- Tue Mar 12, 2013 7:49 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii EZ-GUI
Hi Bart, THis app day by day become more fantastic, i have no chance to fly for few month. Today i have more time to fly again my MWI and test this app. a lot of new features, but i have question about the map, why the goole map is black colour ? is it follow the timezone or it is fix to black colou...
- Mon Mar 11, 2013 6:20 pm
- Forum: Ideas
- Topic: HOTT Telemetry integration
- Replies: 63
- Views: 36637
Re: HOTT Telemetry integration
Hi Sebbi, Actually, i absent for 3 month (moving house) for this wonderfull hobby. i still keep watching the forum but no have long time to try. But Today i started charge my battery to test 2.2. I will do test and give you feedback. I will make a video if i can. here is the video for MWI 2.1 m . Re...
- Mon Mar 11, 2013 2:32 pm
- Forum: Ideas
- Topic: HOTT Telemetry integration
- Replies: 63
- Views: 36637
Re: HOTT Telemetry integration
Any plan to developed the code compatible with 2.2?
Thnks,
John
Thnks,
John
- Sat Dec 01, 2012 11:36 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 897798
Re: GPS integration
Hi Andras,
Im very glad to see you. The last try with last fw mwi im happy with the stability espesially altitude hold and loiter. Is it the right time for way point?
Thanks,
John
Im very glad to see you. The last try with last fw mwi im happy with the stability espesially altitude hold and loiter. Is it the right time for way point?
Thanks,
John
- Thu Nov 29, 2012 12:49 pm
- Forum: Software development
- Topic: MAG calibration - ISSUES
- Replies: 22
- Views: 7513
Re: MAG calibration - ISSUES
i've just bought a multiwii SE v2.0 from hobby king, there's an error on my magnetometer, the south and north direction are reversed, is there anyone can help me about that problem? thanks before.. P agus, What firmware version do u use? Make sure : 1. You choose right board on config.h 2. Calibrat...
- Wed Nov 28, 2012 4:55 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii EZ-GUI
Hi Ezio,
Pls keep battery available on Map. Thanks.
John
Pls keep battery available on Map. Thanks.
John
- Sat Oct 20, 2012 11:51 am
- Forum: Software development
- Topic: NMEA serial GPS not working anymore on R1177
- Replies: 6
- Views: 3597
Re: NMEA serial GPS not working anymore on R1177
I just flying r1177 with flyduino mega and FMP04 with 38400. It works ok. I think the baud rate setting on the GPS was changed after you flash with new firmware. If im not wrong on MTK chipset, if we choose 5Hz the baud rate can be higher than 38400 (115200), we choose 38400 its because we need 10Hz...
- Sat Oct 20, 2012 4:35 am
- Forum: Software development
- Topic: Altitude Hold improvement solution
- Replies: 580
- Views: 1598015
Re: Altitude Hold improvement solution
I just try R1177. The quad fly is perfect stable and pos hold better, but i found 2 problem :
1. Old problem when alt hold start the quad drop approx 1 meter.
2. When its on alt hold mode, and i try to increase the throttle stick up the quad is going down.
John
1. Old problem when alt hold start the quad drop approx 1 meter.
2. When its on alt hold mode, and i try to increase the throttle stick up the quad is going down.
John
- Wed Oct 17, 2012 2:04 am
- Forum: Ideas
- Topic: HOTT Telemetry integration
- Replies: 63
- Views: 36637
Re: HOTT Telemetry integration
Hi,
I have tried the code with 2.1 and it works but litle bit lag. Now i tried with latest r1177 it doesn't work. It seems their is some change on multiwii r1177, such as no more ACC, it become ANGLE and HORIZON.
John
I have tried the code with 2.1 and it works but litle bit lag. Now i tried with latest r1177 it doesn't work. It seems their is some change on multiwii r1177, such as no more ACC, it become ANGLE and HORIZON.
John
- Tue Oct 16, 2012 3:00 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 897798
Re: GPS integration
Very nice to see you Andras. I just try r1177 the alt hold is much better and the stability also improve alot, i think now ready for mission or way point.
John
John
- Sun Oct 14, 2012 3:23 am
- Forum: Software development
- Topic: Altitude Hold improvement solution
- Replies: 580
- Views: 1598015
Re: Altitude Hold improvement solution
Hi Mahowik, I just try alt hold on B3 version. i have problem when the alt hold is on and i tried to move the nick and roll stick and the quad become very hard to control and my quad crash, broke one of prop. I tried B2 version exactly same behavior as Sebbi's video. Tomorrow i am going to try agai...
- Sat Oct 13, 2012 4:01 pm
- Forum: Software development
- Topic: Altitude Hold improvement solution
- Replies: 580
- Views: 1598015
Re: Altitude Hold improvement solution
Hi Mahowik, I just try alt hold on B3 version. i have problem when the alt hold is on and i tried to move the nick and roll stick and the quad become very hard to control and my quad crash, broke one of prop. I tried B2 version exactly same behavior as Sebbi's video. Tomorrow i am going to try again...
- Sun Sep 30, 2012 7:10 pm
- Forum: Software development
- Topic: Altitude Hold improvement solution
- Replies: 580
- Views: 1598015
Re: Altitude Hold improvement solution
I just flied with 2.1 b2 with PID tuned I just made the video : m You can see the quad flying back to coordinate when the PH activated after i move the roll to get the quad moving to other place then i put the stick on centre position. Any step i missed ? thanks for test! Strange, probably I missed...
- Sun Sep 30, 2012 3:52 pm
- Forum: Software development
- Topic: Altitude Hold improvement solution
- Replies: 580
- Views: 1598015
Re: Altitude Hold improvement solution
I just flied with 2.1 b2 with PID tuned I just made the video : m You can see the quad flying back to coordinate when the PH activated after i move the roll to get the quad moving to other place then i put the stick on centre position. Any step i missed ? The Alt hold is much much better during rth ...
- Sun Sep 30, 2012 11:31 am
- Forum: Software development
- Topic: Altitude Hold improvement solution
- Replies: 580
- Views: 1598015
Re: Altitude Hold improvement solution
Hi guys, Here is MultiWii_2_1_b2 1) controlled ascend/descend mode based on the new Alt Hold routine. It's slowly increase/decrease AltHold altitude proportional to stick movement from point where AltHold activated ( +100 throttle gives ~ +50 cm in 1 second with cycle time about 3-4ms): solution fr...
- Mon Sep 24, 2012 6:03 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii AllinOne for Android [update 24/09/2012]
Hi Ezio,
This is great app, i always waiting for this app update on my android play store apps update.
Its perfect, now i am waiting for way point feature on coming multiwii version.
Many thanks Ezio.
John
This is great app, i always waiting for this app update on my android play store apps update.
Its perfect, now i am waiting for way point feature on coming multiwii version.
Many thanks Ezio.
John
- Tue Aug 21, 2012 7:24 am
- Forum: Ideas
- Topic: HOTT Telemetry integration
- Replies: 63
- Views: 36637
Re: HOTT Telemetry integration
Hi
Anyone has tried flying using 2.1?
Thanks,
John
Anyone has tried flying using 2.1?
Thanks,
John
- Tue Aug 21, 2012 4:39 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: Odp: MultiWii AllinOne for Android [update 20/08/2012]
Hi Bart, So, without GPS on multirotor we can passing phone coordinate to multiwii, is it real time data? does it means to use as position hold ? If yes, so the quad will move to folllow the phone if i move the phone? Correct me if im wrong. Btw thank you for this great software. Now i was thinking...
- Mon Aug 20, 2012 5:59 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii AllinOne for Android [update 20/08/2012]
Hi Bart, So, without GPS on multirotor we can passing phone coordinate to multiwii, is it real time data? does it means to use as position hold ? If yes, so the quad will move to folllow the phone if i move the phone? Correct me if im wrong. Btw thank you for this great software. Now i was thinking ...
- Mon Aug 20, 2012 2:36 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: Odp: MultiWii AllinOne for Android [update 20/08/2012]
Hi John It was my mistake (wrong api key for google maps) Should be fine now. Again sorry for stupid mistakes from time to time. I don't have much time to code and test so sometime I relese it without testing it. I want to give you what I have asap. now we have a black background Check the internet...
- Mon Aug 20, 2012 2:33 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii AllinOne for Android [update 20/08/2012]
Hi Ezio, I tested the latest app, here is the result : 1. On GPS menu on bottom there is a comment inject #define GPS_FROM_OSD bla bla, its sometimes shown but sometimes just blank black. 2. What is this feature for ? 3. You said on previous "Btw. If someone wants send gps coordinates from phon...
- Mon Aug 20, 2012 6:56 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii AllinOne for Android [update 20/08/2012]
Hi Ezio,
I just back from the field, i test the map again. It seems the map cannot download the map, its blank and only red dot and small yellow dot. I test my phone for browsing and no problem with my internet access.
Thanks,
John
I just back from the field, i test the map again. It seems the map cannot download the map, its blank and only red dot and small yellow dot. I test my phone for browsing and no problem with my internet access.
Thanks,
John
- Sun Aug 19, 2012 5:09 am
- Forum: Software development
- Topic: Motor Stop with MultiWII 2.1
- Replies: 6
- Views: 2617
Re: Motor Stop with MultiWII 2.1
Yes i have similar problem.
viewtopic.php?f=8&t=2068&start=40#p20818
viewtopic.php?f=8&t=2281
Need some attention for this problem. Without acro its seems quite safe.
viewtopic.php?f=8&t=2068&start=40#p20818
viewtopic.php?f=8&t=2281
Need some attention for this problem. Without acro its seems quite safe.
- Sun Aug 19, 2012 4:04 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii AllinOne for Android [update 18/08/2012]
Hi Ezio, Just test today the Map feature. I dont know its the bug or im set wrong config. The position showing approx 20 km away from my location without red dot but sometimes it show the right position with big red dot. If im using WinGUI its show the right position, so it could be the map feature ...
- Sat Aug 18, 2012 5:52 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii AllinOne for Android [update 18/08/2012]
Hi Ezio,
Its amazing, the last release is exactly what i like. I will test it this today.
Many thanks,
John
Its amazing, the last release is exactly what i like. I will test it this today.
Many thanks,
John
- Fri Aug 17, 2012 1:44 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741430
Re: MultiWii AllinOne for Android [update 10/08/2012]
Hi Ezio, I like this app. I wish some additional feature : 1. On the Dash board 2, It has background google maps and showing the quad position 2. On the dashboard 2, it has Voltage and Amp, with audible and visual low voltage alarm. 3. All dashboard can be rotated to landscape mode. 4. On GPS menu h...
- Thu Aug 16, 2012 5:52 pm
- Forum: Software development
- Topic: Closed: Can not reproduce. Crius AIO + serial GPS problems
- Replies: 5
- Views: 2096
Re: Crius AIO + serial GPS problems
I must admit I recently had a similar issue. It was on a mega board with a serial GPS connected (flyduino mega+GPS BOB and NMEA sentences) It wasn't with GPS PH or RTH activated. And failsafe was not activated. I tend to suspect a power problem somewhere. The board uses the power from one ESC BEC. ...
- Thu Aug 16, 2012 5:05 pm
- Forum: Software development
- Topic: MultiWii GPS support
- Replies: 42
- Views: 31951
Re: MultiWii GPS support
I have both MTK and ublox, i still prefer MTK chipset FMP04 from flyduino (its serial). FMP04 just plug and run without any modification and very good signal reception.
- Sun Aug 12, 2012 3:50 pm
- Forum: Software development
- Topic: MultiWii release 2.1 is here :)
- Replies: 52
- Views: 47247
Re: strange behaviour after acrobatic on MWI 2.1
Hi, I have strange quad behavior using 2.1 quadrino after i do acrobatic using headfree, acc on. the quad become uncontrollable and tend to fly infront. the first try i broke one motor and 2 arm was bended, and the second try still remain same strange behavior, but luckily it fly low and small dama...
- Sat Aug 11, 2012 5:31 am
- Forum: Software development
- Topic: MultiWii release 2.1 is here :)
- Replies: 52
- Views: 47247
strange behaviour after acrobatic on MWI 2.1
Hi, I have strange quad behavior using 2.1 quadrino after i do acrobatic using headfree, acc on. the quad become uncontrollable and tend to fly infront. the first try i broke one motor and 2 arm was bended, and the second try still remain same strange behavior, but luckily it fly low and small damag...
- Sun Aug 05, 2012 6:28 pm
- Forum: Software development
- Topic: WinGUI 2.1 Beta is released for testing
- Replies: 96
- Views: 30002
Re: WinGUI 2.1 Beta is released for testing
I try to connect my notebook using old external BT dongle class 1, i got 100 m (i put the notebook inside the car). The problem with latest wingui is when the quad was out of BT coverage and i tried the quad get closer, the BT connection cannot reconnect and the application freezing. Its maybe some ...
- Sun Aug 05, 2012 6:19 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 897798
Re: GPS integration
Thats the cheapest antenna with quite cheap shiping cost. I still searching for the bigger one 35x35 with cheap shipping cost. I can see the significant different small 18x18 with bigger 25x25 and MTK chipset with Ublox neo. Thanks EOSBandi for the fast reply, i order several to change my navigatron...
- Sun Aug 05, 2012 6:02 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 897798
Re: GPS integration
Mr.EOSBandi, if you have time to answer my question, please help me about GPS antenna. I search in Mouser and found several types of big GPS antenna, some are Active and others are Passive. It seems Passive type doesn't have cable and must solder to ground plate but cheap, Active type seems have al...
- Tue Jul 24, 2012 11:38 am
- Forum: Software development
- Topic: Crius GPS and I2C_GPS_NAV
- Replies: 95
- Views: 61468
Re: Crius GPS and I2C_GPS_NAV
According this post http://www.rcgroups.com/forums/showpost ... count=3516
38400 is should be enough.
38400 is should be enough.
- Tue Jul 24, 2012 11:21 am
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 897798
Re: GPS integration
Can you share what GPS do you use? Hi John! I'm using this GPS m but I'm not very happy with it as it looses very often configuration data and to make it working you have always to switch it on/off a couple of time. Luciano I saw its quite good position hold with this cheap GPS. I think it would be...
- Tue Jul 24, 2012 8:51 am
- Forum: Shields, boards and sensors
- Topic: 10Hz GPS thread
- Replies: 84
- Views: 129510
Re: 10Hz GPS thread
Ok many thanks.
I dont know why no gps board maker never use eeprom.
John
I dont know why no gps board maker never use eeprom.
John
- Tue Jul 24, 2012 1:22 am
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 897798
Re: GPS integration
Hi Luciano,
Can you share what GPS do you use?
Thanks,
John
Can you share what GPS do you use?
Thanks,
John