Hi acid_g,
have you tried how it behaves with only 1/2/3 ESCs connected/under load with motor(s)? Maybe an (broken) ESC is injecting noise to the 5V line. Is your buffer foam from an ESD protection (slighty conductive)?
regards,
gompf
Search found 8 matches
- Mon Apr 18, 2011 10:36 pm
- Forum: General discussions
- Topic: Quad X - not flyable - devil inside??
- Replies: 8
- Views: 4163
- Mon Mar 28, 2011 11:16 am
- Forum: Getting Started - MultiWii config and setup
- Topic: Compile MultiWiiConf-Basic HowTo
- Replies: 16
- Views: 21262
Compile MultiWiiConf-Basic HowTo
Hi, maybe easy stuff for most of you but cost me some time on the first run. I´m sure it´s already explained better somewhere else but I haven`t found it in compressed form so I´ll give a brief description here: 1. Altough the Conf code opens in Arduino you need "Processing" to compile it:...
- Mon Mar 28, 2011 10:49 am
- Forum: Ideas
- Topic: I2C address constants, TRI yaw centre, ACC offsets
- Replies: 0
- Views: 1130
I2C address constants, TRI yaw centre, ACC offsets
Hi Alex, nothing essential but mayby nice to have for others, too: - constants for the Adresses of the I2C sensors, e.g. /* I2C gyroscope */ #define ITG3200 #define Gadr 0xD2 //#define L3G4200D /* I2C accelerometer */ #define ADXL345 #define ACCadr 0xA6 . . . #if defined(ITG3200) ... i2c_rep_start(G...
- Mon Mar 21, 2011 11:56 am
- Forum: General discussions
- Topic: Calibrating ESCs using multiiWii code
- Replies: 7
- Views: 3995
Re: Calibrating ESCs using multiiWii code
Hi mstanescu! The fast beeping means that they lost input signal -> minimum pulse time is too short, try higher numbers eg. 1010, 1020... I finally switched my 6A ESCs to the quax blmc firmware because I had the problem that travel setup was messed up from time to time (eg after firmware download to...
- Mon Mar 14, 2011 7:46 pm
- Forum: Pictures & Videos
- Topic: Tricopter, 22cm, 260g
- Replies: 3
- Views: 4250
Re: Tricopter, 22cm, 260g
Hi! in principle it is the SLE-Y09.1V6 frame of "sms86" from the mikrokopter forum: http://forum.mikrokopter.de/topic-13589-1.html The frame is ment as a hexacopter, is OS and you can find different design stages in the threat above. I just shrinked it to 50% of the design size and did som...
- Thu Feb 10, 2011 9:47 pm
- Forum: Shields, boards and sensors
- Topic: Connecting multiple +5v to the board via ESC
- Replies: 14
- Views: 8263
Re: Connecting multiple +5v to the board via ESC
Hi! It maybe a risk! It doesn´t depend on the basic technology (switching/linear), e.g. iirc it´s possible with YGE-BLMCs (switching BEC), but on the circuite/layout/interconnection. The two main risks are: -Doesn´t work as it shoud which means that the main load is driven by the BEC with the highes...
- Sun Feb 06, 2011 12:53 pm
- Forum: Pictures & Videos
- Topic: Tricopter, 22cm, 260g
- Replies: 3
- Views: 4250
Tricopter, 22cm, 260g
Hi! http://www.gompf-online.de/MultiWii/Tri-1.jpg http://www.gompf-online.de/MultiWii/Tri-2.jpg http://www.gompf-online.de/MultiWii/Tri-3.jpg First flight last night with MW1.6, ITG3200, ADXL345, BLC Hype 6A, Roxxy 2216/25 I need to get rid of some vibs now but it flies Thank you, Alex! Regards, gompf
- Sun Feb 06, 2011 2:53 am
- Forum: Software development
- Topic: MultiWii v1.6 released
- Replies: 8
- Views: 6026
Re: MultiWii v1.6 released
Thank you! Works great!