Search found 51 matches

by Cronalex
Thu Jun 21, 2012 11:30 am
Forum: ESCs, propellers , servos and radios
Topic: AUX 2 on Spektrum DX6i;Possible?
Replies: 19
Views: 26378

Re: AUX 2 on Spektrum DX6i;Possible?

unfortunately I can not use this setting someone help me? do not activate the functions
by Cronalex
Sun Jun 17, 2012 4:18 pm
Forum: Ideas
Topic: Attemp to integrate sonar (ultrasonic sensor)
Replies: 265
Views: 223476

Re: Attemp to integrate sonar (ultrasonic sensor)

Cronalex wrote:I would use this sonar Maxbotix LV-EZ0 you can?

up
by Cronalex
Fri Jun 15, 2012 4:51 pm
Forum: Ideas
Topic: Attemp to integrate sonar (ultrasonic sensor)
Replies: 265
Views: 223476

Re: Attemp to integrate sonar (ultrasonic sensor)

I would use this sonar Maxbotix LV-EZ0 you can?
by Cronalex
Tue May 15, 2012 3:38 pm
Forum: Software development
Topic: multiwii proximity sensors board
Replies: 2
Views: 1993

Re: multiwii proximity sensors board

I am very interested to sonar maxbotix and sharp
by Cronalex
Sun May 06, 2012 6:05 pm
Forum: General discussions
Topic: gray arrow COMPAS GUI
Replies: 1
Views: 1047

gray arrow COMPAS GUI

why?! the gray arrow is SOUTH
my board multiwii crius SE
by Cronalex
Sun May 06, 2012 4:08 pm
Forum: Ideas
Topic: Simple mode for beginers
Replies: 70
Views: 37784

Re: Simple mode for beginers

I still don't get one thing. It's supposed to have the "head" always pointing to N ? I have noticed that in my setup if i take off with me and the copter looking to N everything is ok but I think that the copter is not able to understand his front and back.. I mean, in my gui if my copter...
by Cronalex
Sun May 06, 2012 9:35 am
Forum: Ideas
Topic: Simple mode for beginers
Replies: 70
Views: 37784

Re: Simple mode for beginers

I can explain the procedure how to use it ... because I just can not get it going. HELP MEEEE
by Cronalex
Sat May 05, 2012 3:59 pm
Forum: Ideas
Topic: Simple mode for beginers
Replies: 70
Views: 37784

Re: Simple mode for beginers

PatrikE wrote:Calibrated it so gui show correct heading?

yes the magnetometer is calibrated it works ... when I use it ... but also in active headfree gui does not change anything ...
by Cronalex
Sat May 05, 2012 3:49 pm
Forum: Ideas
Topic: Simple mode for beginers
Replies: 70
Views: 37784

Re: Simple mode for beginers

Lapino wrote:
Cronalex wrote:I tried to activate the function in headfree multiwii 2.0 does not work but nothing on but nothing changes

Do you have a mag?
It's essential for this mode. Without it the copter doesn't know its reference heading ;)

yes :(
by Cronalex
Sat May 05, 2012 3:39 pm
Forum: Ideas
Topic: Simple mode for beginers
Replies: 70
Views: 37784

Re: Simple mode for beginers

but what you have to turn in the gui?? magnetometer and headfree right? if you do not do it anyway
by Cronalex
Sat May 05, 2012 3:23 pm
Forum: Software development
Topic: MultiWii 2.0 bug report
Replies: 99
Views: 45115

Re: MultiWii 2.0 bug report

I have a multiwii crius SE and I do not work in version 2.0 headfree why? What should I do?
by Cronalex
Sat May 05, 2012 2:35 pm
Forum: Ideas
Topic: Simple mode for beginers
Replies: 70
Views: 37784

Re: Simple mode for beginers

I tried to activate the function in headfree multiwii 2.0 does not work but nothing on but nothing changes
by Cronalex
Sat May 05, 2012 1:27 pm
Forum: Ideas
Topic: Simple mode for beginers
Replies: 70
Views: 37784

Re: Simple mode for beginers

mahowik wrote:
Cronalex wrote:can someone send me a version with this feature implemented

official 2.0 version ;)

but I must also activate the accelerometer head when I use free?
by Cronalex
Fri May 04, 2012 9:23 pm
Forum: Ideas
Topic: Simple mode for beginers
Replies: 70
Views: 37784

Re: Simple mode for beginers

can someone send me a version with this feature implemented
by Cronalex
Wed May 02, 2012 5:27 pm
Forum: MultiWii tweaking - flying experience
Topic: 2.0 ALT PID Tuning
Replies: 19
Views: 24175

Re: 2.0 ALT PID Tuning

Hi, Try this, I use this method. Set P and I to 0. Slow increase D from 0 in 0.2 increments until you start to get a slow yo yo movement. Reduce D a littleuntil yo yo movement stops. At this point the multicopter will start to hold altitude with drift. Increase P slow now, and you will find that th...
by Cronalex
Sun Apr 29, 2012 8:19 pm
Forum: Ideas
Topic: 0.96" SSD1306 128X64 OLED Display Module
Replies: 207
Views: 235167

Re: 0.96" SSD1306 128X64 OLED Display Module

I have a multiwii crius SE I can use this LCD? if you like to do?
by Cronalex
Sat Apr 28, 2012 8:07 pm
Forum: Shields, boards and sensors
Topic: Serial Bluetooth RF Transceiver Module RS232
Replies: 154
Views: 122480

Re: Serial Bluetooth RF Transceiver Module RS232

Hamburger wrote:so it did work but not anymore now?
Then it is probably broken. If you cannot otherwise test, simply buy a new one is easiest

but is the second in a month :(
by Cronalex
Sat Apr 28, 2012 5:16 pm
Forum: Shields, boards and sensors
Topic: Serial Bluetooth RF Transceiver Module RS232
Replies: 154
Views: 122480

Re: Serial Bluetooth RF Transceiver Module RS232

Hello everyone I have a problem with crius SE second module is the "Serial Bluetooth RF Transceiver Module RS232" after a while I use gives me problems. connects to the phone but did not receive anything ... is the second module I is burned in this way ... I can only connect ... more why?...
by Cronalex
Sat Apr 28, 2012 4:27 pm
Forum: Shields, boards and sensors
Topic: Collection: HowTo config various BT modules
Replies: 28
Views: 14161

Re: Collection: HowTo config various BT modules

Hello everyone I have a problem with crius SE second module is the "Serial Bluetooth RF Transceiver Module RS232" after a while I use gives me problems. connects to the phone but did not receive anything ... is the second module I is burned in this way ... I can only connect ... more why?
by Cronalex
Sat Apr 28, 2012 4:26 pm
Forum: Shields, boards and sensors
Topic: Serial Bluetooth RF Transceiver Module RS232
Replies: 154
Views: 122480

Re: Serial Bluetooth RF Transceiver Module RS232

Hello everyone I have a problem with crius SE second module is the "Serial Bluetooth RF Transceiver Module RS232" after a while I use gives me problems. connects to the phone but did not receive anything ... is the second module I is burned in this way ... I can only connect ... more why?
by Cronalex
Wed Apr 25, 2012 12:22 am
Forum: Ideas
Topic: Inflight ACC-calibration
Replies: 127
Views: 72201

Re: Inflight ACC-calibration

with the DX6i can use this function?
by Cronalex
Sun Apr 22, 2012 2:47 pm
Forum: Ideas
Topic: wishlist for v2.1
Replies: 62
Views: 21724

Re: wishlist for v2.1

it is already possible to auto trimming of the accelerometers?
by Cronalex
Mon Apr 16, 2012 4:55 pm
Forum: Ideas
Topic: Throttle expo
Replies: 22
Views: 10570

Re: Throttle expo

with parameters that should make the expo to have a good throttle curve?

my default
rc rate : 0.90
expo: 0.65
MINTHROTTLE: 1200
MAXTHROTTLE:1850
by Cronalex
Sun Apr 08, 2012 7:58 am
Forum: Ideas
Topic: Throttle expo
Replies: 22
Views: 10570

Re: Throttle expo

I did not understand how this change
by Cronalex
Sat Mar 31, 2012 1:23 pm
Forum: Software development
Topic: MWC 2.0 with Magnetron's moving averages
Replies: 4
Views: 2167

Re: MWC 2.0 with Magnetron's moving averages

to what you have set the moving average on the accelerometers?
by Cronalex
Fri Mar 30, 2012 10:30 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 878020

Re: GPS integration

Cronalex wrote:I realized that I have to buy gps for multiwii crius Se for version multiwii 2.0???

nobody knows you recommend a GPS module to be taken?
by Cronalex
Fri Mar 30, 2012 7:44 pm
Forum: Software development
Topic: MWC 2.0 with Magnetron's moving averages
Replies: 4
Views: 2167

Re: MWC 2.0 with Magnetron's moving averages

have used the moving average on the gyroscopes or accelerometers?? I used that and it works great on gyros
by Cronalex
Fri Mar 30, 2012 12:33 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 878020

Re: GPS integration

I realized that I have to buy gps for multiwii crius Se for version multiwii 2.0???
by Cronalex
Fri Mar 30, 2012 11:07 am
Forum: Software development
Topic: WinGUI public beta
Replies: 132
Views: 67735

Re: WinGUI public beta

how do I make it work with ubuntu??
by Cronalex
Wed Mar 28, 2012 8:16 am
Forum: Software development
Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
Replies: 65
Views: 29179

Re: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!

Cronalex wrote:This problem also exists on these esc? hobbywing skywalker 20a?? or can I go quiet

up
by Cronalex
Wed Mar 28, 2012 1:18 am
Forum: Software development
Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
Replies: 65
Views: 29179

Re: Run MultiWii @ 400 Hz - Very Important !

kos wrote:yes , with the new output.pde (thanks to ronco) it is quite easy to change ..

I can not find where to set to 400
by Cronalex
Wed Mar 28, 2012 1:06 am
Forum: Software development
Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
Replies: 65
Views: 29179

Re: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!

This problem also exists on these esc? hobbywing skywalker 20a?? or can I go quiet
by Cronalex
Wed Mar 28, 2012 1:02 am
Forum: Software development
Topic: Yaw bug?
Replies: 4
Views: 2826

Re: Yaw bug?

I have the same problem but with the quadricopter turns to the left MCU mutlwii crius SE
by Cronalex
Tue Mar 27, 2012 2:13 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106656

Re: MultiWii 2.0 is coming

sorry guys .. but I solved the problem by enabling // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTORLENGHT 10 // Lenght of Moving Average Vector The quadricopter is stable now, but now I wonder why?...
by Cronalex
Tue Mar 27, 2012 1:37 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106656

Re: MultiWii 2.0 is coming

sorry guys .. but I solved the problem by enabling // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTORLENGHT 10 // Lenght of Moving Average Vector The quadricopter is stable now, but now I wonder why?...
by Cronalex
Mon Mar 26, 2012 3:08 pm
Forum: General discussions
Topic: multiwii 2.0 problems gyro
Replies: 4
Views: 1975

Re: multiwii 2.0 problems gyro

can send me the version 2.0 with accelerometers on the moving average
by Cronalex
Mon Mar 26, 2012 12:20 pm
Forum: General discussions
Topic: multiwii 2.0 problems gyro
Replies: 4
Views: 1975

Re: multiwii 2.0 problems gyro

hello guys do not understand why I have problems with version 2.0 ... the quad tends to roll to the side and I discovered that if I use the function: // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTO...
by Cronalex
Mon Mar 26, 2012 11:30 am
Forum: Getting Started - MultiWii config and setup
Topic: calibrate function LEVEL with the gui
Replies: 5
Views: 2186

Re: calibrate function LEVEL with the gui

Alexinparis wrote:please read this carefully, it's not too long to read.
http://www.multiwii.com/
(Accelerometers calibration)

I'm not talking about the calibration works but radio trim for leveling
by Cronalex
Mon Mar 26, 2012 9:57 am
Forum: Getting Started - MultiWii config and setup
Topic: calibrate function LEVEL with the gui
Replies: 5
Views: 2186

Re: calibrate function LEVEL with the gui

trim function auto stable???

Bring the throttle stick to maximum

Move the cyclic stick forward to a time (the LED will flash) and once to the left (the LED will flash). no test in the gui??

example http://www.youtube.com/watch?v=aPs0dUqtnTM
by Cronalex
Mon Mar 26, 2012 9:41 am
Forum: Getting Started - MultiWii config and setup
Topic: calibrate function LEVEL with the gui
Replies: 5
Views: 2186

calibrate function LEVEL with the gui

how to calibrate the function LEVEL, using the GUI? you can? if so, how is it done? I do not want to risk breaking it in the test
by Cronalex
Sun Mar 25, 2012 10:22 pm
Forum: General discussions
Topic: multiwii 2.0 problems gyro
Replies: 4
Views: 1975

multiwii 2.0 problems gyro

hello guys do not understand why I have problems with version 2.0 ... the quad tends to roll to the side and I discovered that if I use the function: // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTOR...
by Cronalex
Sun Mar 25, 2012 9:39 pm
Forum: Software development
Topic: WinGUI public beta
Replies: 132
Views: 67735

Re: WinGUI public beta

I installed the released 2.0 but the gui does not work :( why??? tnx
by Cronalex
Sun Mar 25, 2012 9:28 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106656

Re: MultiWii 2.0 is coming

sorry guys .. but I solved the problem by enabling // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTORLENGHT 10 // Lenght of Moving Average Vector The quadricopter is stable now, but now I wonder why? ...
by Cronalex
Sun Mar 25, 2012 6:59 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106656

Re: MultiWii 2.0 is coming

kalle123 wrote:@cronalex.

You are posting here in SOFTWARE - CURRENT DEVELOPMENTS AND BUGS.

Next time better post in GETTING STARTED or GENERAL DISCUSSION.

BR/

sorry
by Cronalex
Sun Mar 25, 2012 6:50 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106656

Re: MultiWii 2.0 is coming

I did this test control by: TILT the MULTI to the RIGHT (left side up): MAG_ROLL, ACC_ROLL and GYRO_ROLL goes up MAG_Z and ACC_Z goes down TILT the MULTI forward (tail up): MAG_PITCH, ACC_PITCH and GYRO_PITCH goes up MAG_Z and ACC_Z goes down Rotating the copter clockwise (YAW): GYRO_YAW goes up The...
by Cronalex
Sun Mar 25, 2012 6:47 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106656

Re: MultiWii 2.0 is coming

wilco1967 wrote:
Cronalex wrote:with version 1.9 I don't have these problems... yes sensor orientation is ok (GUI)


are you sure ?
the orientation was changed between 1.9 and 2.0 on a lot of sensors.

http://www.multiwii.com/faq#How_should_ ... directions

yes is ok orientation... I use the crius Se and I defined the voice crius SE In the config.h
by Cronalex
Sun Mar 25, 2012 6:41 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106656

Re: MultiWii 2.0 is coming

with version 1.9 I don't have these problems... yes sensor orientation is ok (GUI)
by Cronalex
Sun Mar 25, 2012 6:27 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106656

Re: MultiWii 2.0 is coming

hi, i have a multiwii crius se i have charged multiwii relase 2.0 but i have a problem when start my quadcopter and give power to motor the quad do a flip forward but if i charge 1.9 version it's ok have you an idea for my problem? If you are using level mode, calibrate ACC before use! no level mod...