Search found 51 matches
- Thu Jun 21, 2012 11:30 am
- Forum: ESCs, propellers , servos and radios
- Topic: AUX 2 on Spektrum DX6i;Possible?
- Replies: 19
- Views: 26710
Re: AUX 2 on Spektrum DX6i;Possible?
unfortunately I can not use this setting someone help me? do not activate the functions
- Sun Jun 17, 2012 4:18 pm
- Forum: Ideas
- Topic: Attemp to integrate sonar (ultrasonic sensor)
- Replies: 265
- Views: 225869
Re: Attemp to integrate sonar (ultrasonic sensor)
Cronalex wrote:I would use this sonar Maxbotix LV-EZ0 you can?
up
- Fri Jun 15, 2012 4:51 pm
- Forum: Ideas
- Topic: Attemp to integrate sonar (ultrasonic sensor)
- Replies: 265
- Views: 225869
Re: Attemp to integrate sonar (ultrasonic sensor)
I would use this sonar Maxbotix LV-EZ0 you can?
- Tue May 15, 2012 3:38 pm
- Forum: Software development
- Topic: multiwii proximity sensors board
- Replies: 2
- Views: 2012
Re: multiwii proximity sensors board
I am very interested to sonar maxbotix and sharp
- Sun May 06, 2012 6:05 pm
- Forum: General discussions
- Topic: gray arrow COMPAS GUI
- Replies: 1
- Views: 1058
gray arrow COMPAS GUI
why?! the gray arrow is SOUTH
my board multiwii crius SE
my board multiwii crius SE
- Sun May 06, 2012 4:08 pm
- Forum: Ideas
- Topic: Simple mode for beginers
- Replies: 70
- Views: 38201
Re: Simple mode for beginers
I still don't get one thing. It's supposed to have the "head" always pointing to N ? I have noticed that in my setup if i take off with me and the copter looking to N everything is ok but I think that the copter is not able to understand his front and back.. I mean, in my gui if my copter...
- Sun May 06, 2012 9:35 am
- Forum: Ideas
- Topic: Simple mode for beginers
- Replies: 70
- Views: 38201
Re: Simple mode for beginers
I can explain the procedure how to use it ... because I just can not get it going. HELP MEEEE
- Sat May 05, 2012 3:59 pm
- Forum: Ideas
- Topic: Simple mode for beginers
- Replies: 70
- Views: 38201
Re: Simple mode for beginers
PatrikE wrote:Calibrated it so gui show correct heading?
yes the magnetometer is calibrated it works ... when I use it ... but also in active headfree gui does not change anything ...
- Sat May 05, 2012 3:49 pm
- Forum: Ideas
- Topic: Simple mode for beginers
- Replies: 70
- Views: 38201
Re: Simple mode for beginers
Lapino wrote:Cronalex wrote:I tried to activate the function in headfree multiwii 2.0 does not work but nothing on but nothing changes
Do you have a mag?
It's essential for this mode. Without it the copter doesn't know its reference heading
yes
- Sat May 05, 2012 3:39 pm
- Forum: Ideas
- Topic: Simple mode for beginers
- Replies: 70
- Views: 38201
Re: Simple mode for beginers
but what you have to turn in the gui?? magnetometer and headfree right? if you do not do it anyway
- Sat May 05, 2012 3:23 pm
- Forum: Software development
- Topic: MultiWii 2.0 bug report
- Replies: 99
- Views: 45650
Re: MultiWii 2.0 bug report
I have a multiwii crius SE and I do not work in version 2.0 headfree why? What should I do?
- Sat May 05, 2012 2:35 pm
- Forum: Ideas
- Topic: Simple mode for beginers
- Replies: 70
- Views: 38201
Re: Simple mode for beginers
I tried to activate the function in headfree multiwii 2.0 does not work but nothing on but nothing changes
- Sat May 05, 2012 1:27 pm
- Forum: Ideas
- Topic: Simple mode for beginers
- Replies: 70
- Views: 38201
Re: Simple mode for beginers
mahowik wrote:Cronalex wrote:can someone send me a version with this feature implemented
official 2.0 version
but I must also activate the accelerometer head when I use free?
- Fri May 04, 2012 9:23 pm
- Forum: Ideas
- Topic: Simple mode for beginers
- Replies: 70
- Views: 38201
Re: Simple mode for beginers
can someone send me a version with this feature implemented
- Wed May 02, 2012 5:27 pm
- Forum: MultiWii tweaking - flying experience
- Topic: 2.0 ALT PID Tuning
- Replies: 19
- Views: 24387
Re: 2.0 ALT PID Tuning
Hi, Try this, I use this method. Set P and I to 0. Slow increase D from 0 in 0.2 increments until you start to get a slow yo yo movement. Reduce D a littleuntil yo yo movement stops. At this point the multicopter will start to hold altitude with drift. Increase P slow now, and you will find that th...
- Sun Apr 29, 2012 8:19 pm
- Forum: Ideas
- Topic: 0.96" SSD1306 128X64 OLED Display Module
- Replies: 207
- Views: 238405
Re: 0.96" SSD1306 128X64 OLED Display Module
I have a multiwii crius SE I can use this LCD? if you like to do?
- Sun Apr 29, 2012 9:33 am
- Forum: Shields, boards and sensors
- Topic: Serial Bluetooth RF Transceiver Module RS232
- Replies: 154
- Views: 123445
Re: Serial Bluetooth RF Transceiver Module RS232
So what do I do?
- Sat Apr 28, 2012 8:07 pm
- Forum: Shields, boards and sensors
- Topic: Serial Bluetooth RF Transceiver Module RS232
- Replies: 154
- Views: 123445
Re: Serial Bluetooth RF Transceiver Module RS232
Hamburger wrote:so it did work but not anymore now?
Then it is probably broken. If you cannot otherwise test, simply buy a new one is easiest
but is the second in a month
- Sat Apr 28, 2012 5:16 pm
- Forum: Shields, boards and sensors
- Topic: Serial Bluetooth RF Transceiver Module RS232
- Replies: 154
- Views: 123445
Re: Serial Bluetooth RF Transceiver Module RS232
Hello everyone I have a problem with crius SE second module is the "Serial Bluetooth RF Transceiver Module RS232" after a while I use gives me problems. connects to the phone but did not receive anything ... is the second module I is burned in this way ... I can only connect ... more why?...
- Sat Apr 28, 2012 4:27 pm
- Forum: Shields, boards and sensors
- Topic: Collection: HowTo config various BT modules
- Replies: 28
- Views: 14327
Re: Collection: HowTo config various BT modules
Hello everyone I have a problem with crius SE second module is the "Serial Bluetooth RF Transceiver Module RS232" after a while I use gives me problems. connects to the phone but did not receive anything ... is the second module I is burned in this way ... I can only connect ... more why?
- Sat Apr 28, 2012 4:26 pm
- Forum: Shields, boards and sensors
- Topic: Serial Bluetooth RF Transceiver Module RS232
- Replies: 154
- Views: 123445
Re: Serial Bluetooth RF Transceiver Module RS232
Hello everyone I have a problem with crius SE second module is the "Serial Bluetooth RF Transceiver Module RS232" after a while I use gives me problems. connects to the phone but did not receive anything ... is the second module I is burned in this way ... I can only connect ... more why?
- Wed Apr 25, 2012 12:22 am
- Forum: Ideas
- Topic: Inflight ACC-calibration
- Replies: 127
- Views: 73078
Re: Inflight ACC-calibration
with the DX6i can use this function?
- Sun Apr 22, 2012 2:47 pm
- Forum: Ideas
- Topic: wishlist for v2.1
- Replies: 62
- Views: 22037
Re: wishlist for v2.1
it is already possible to auto trimming of the accelerometers?
- Mon Apr 16, 2012 4:55 pm
- Forum: Ideas
- Topic: Throttle expo
- Replies: 22
- Views: 10674
Re: Throttle expo
with parameters that should make the expo to have a good throttle curve?
my default
rc rate : 0.90
expo: 0.65
MINTHROTTLE: 1200
MAXTHROTTLE:1850
my default
rc rate : 0.90
expo: 0.65
MINTHROTTLE: 1200
MAXTHROTTLE:1850
- Sun Apr 08, 2012 7:58 am
- Forum: Ideas
- Topic: Throttle expo
- Replies: 22
- Views: 10674
Re: Throttle expo
I did not understand how this change
- Sat Mar 31, 2012 1:23 pm
- Forum: Software development
- Topic: MWC 2.0 with Magnetron's moving averages
- Replies: 4
- Views: 2194
Re: MWC 2.0 with Magnetron's moving averages
to what you have set the moving average on the accelerometers?
- Fri Mar 30, 2012 10:55 pm
- Forum: Software development
- Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
- Replies: 65
- Views: 29545
Re: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
but it also works with crius?
- Fri Mar 30, 2012 10:30 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 887629
Re: GPS integration
Cronalex wrote:I realized that I have to buy gps for multiwii crius Se for version multiwii 2.0???
nobody knows you recommend a GPS module to be taken?
- Fri Mar 30, 2012 7:44 pm
- Forum: Software development
- Topic: MWC 2.0 with Magnetron's moving averages
- Replies: 4
- Views: 2194
Re: MWC 2.0 with Magnetron's moving averages
have used the moving average on the gyroscopes or accelerometers?? I used that and it works great on gyros
- Fri Mar 30, 2012 12:33 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 887629
Re: GPS integration
I realized that I have to buy gps for multiwii crius Se for version multiwii 2.0???
- Fri Mar 30, 2012 11:07 am
- Forum: Software development
- Topic: WinGUI public beta
- Replies: 132
- Views: 69558
Re: WinGUI public beta
how do I make it work with ubuntu??
- Wed Mar 28, 2012 8:16 am
- Forum: Software development
- Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
- Replies: 65
- Views: 29545
Re: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
Cronalex wrote:This problem also exists on these esc? hobbywing skywalker 20a?? or can I go quiet
up
- Wed Mar 28, 2012 1:18 am
- Forum: Software development
- Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
- Replies: 65
- Views: 29545
Re: Run MultiWii @ 400 Hz - Very Important !
kos wrote:yes , with the new output.pde (thanks to ronco) it is quite easy to change ..
I can not find where to set to 400
- Wed Mar 28, 2012 1:06 am
- Forum: Software development
- Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
- Replies: 65
- Views: 29545
Re: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
This problem also exists on these esc? hobbywing skywalker 20a?? or can I go quiet
- Wed Mar 28, 2012 1:02 am
- Forum: Software development
- Topic: Yaw bug?
- Replies: 4
- Views: 2850
Re: Yaw bug?
I have the same problem but with the quadricopter turns to the left MCU mutlwii crius SE
- Tue Mar 27, 2012 2:13 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
sorry guys .. but I solved the problem by enabling // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTORLENGHT 10 // Lenght of Moving Average Vector The quadricopter is stable now, but now I wonder why?...
- Tue Mar 27, 2012 1:37 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
sorry guys .. but I solved the problem by enabling // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTORLENGHT 10 // Lenght of Moving Average Vector The quadricopter is stable now, but now I wonder why?...
- Mon Mar 26, 2012 3:08 pm
- Forum: General discussions
- Topic: multiwii 2.0 problems gyro
- Replies: 4
- Views: 2011
Re: multiwii 2.0 problems gyro
can send me the version 2.0 with accelerometers on the moving average
- Mon Mar 26, 2012 12:20 pm
- Forum: General discussions
- Topic: multiwii 2.0 problems gyro
- Replies: 4
- Views: 2011
Re: multiwii 2.0 problems gyro
hello guys do not understand why I have problems with version 2.0 ... the quad tends to roll to the side and I discovered that if I use the function: // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTO...
- Mon Mar 26, 2012 11:30 am
- Forum: Getting Started - MultiWii config and setup
- Topic: calibrate function LEVEL with the gui
- Replies: 5
- Views: 2221
Re: calibrate function LEVEL with the gui
Alexinparis wrote:please read this carefully, it's not too long to read.
http://www.multiwii.com/
(Accelerometers calibration)
I'm not talking about the calibration works but radio trim for leveling
- Mon Mar 26, 2012 9:57 am
- Forum: Getting Started - MultiWii config and setup
- Topic: calibrate function LEVEL with the gui
- Replies: 5
- Views: 2221
Re: calibrate function LEVEL with the gui
trim function auto stable???
Bring the throttle stick to maximum
Move the cyclic stick forward to a time (the LED will flash) and once to the left (the LED will flash). no test in the gui??
example http://www.youtube.com/watch?v=aPs0dUqtnTM
Bring the throttle stick to maximum
Move the cyclic stick forward to a time (the LED will flash) and once to the left (the LED will flash). no test in the gui??
example http://www.youtube.com/watch?v=aPs0dUqtnTM
- Mon Mar 26, 2012 9:41 am
- Forum: Getting Started - MultiWii config and setup
- Topic: calibrate function LEVEL with the gui
- Replies: 5
- Views: 2221
calibrate function LEVEL with the gui
how to calibrate the function LEVEL, using the GUI? you can? if so, how is it done? I do not want to risk breaking it in the test
- Sun Mar 25, 2012 10:22 pm
- Forum: General discussions
- Topic: multiwii 2.0 problems gyro
- Replies: 4
- Views: 2011
multiwii 2.0 problems gyro
hello guys do not understand why I have problems with version 2.0 ... the quad tends to roll to the side and I discovered that if I use the function: // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTOR...
- Sun Mar 25, 2012 9:39 pm
- Forum: Software development
- Topic: WinGUI public beta
- Replies: 132
- Views: 69558
Re: WinGUI public beta
I installed the released 2.0 but the gui does not work why??? tnx
- Sun Mar 25, 2012 9:28 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
sorry guys .. but I solved the problem by enabling // Moving Average Gyros by Magnetron1 (Michele Ardito) ########## beta #define MMGYRO // Active Moving Average Function for Gyros #define MMGYROVECTORLENGHT 10 // Lenght of Moving Average Vector The quadricopter is stable now, but now I wonder why? ...
- Sun Mar 25, 2012 6:59 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
kalle123 wrote:@cronalex.
You are posting here in SOFTWARE - CURRENT DEVELOPMENTS AND BUGS.
Next time better post in GETTING STARTED or GENERAL DISCUSSION.
BR/
sorry
- Sun Mar 25, 2012 6:50 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
I did this test control by: TILT the MULTI to the RIGHT (left side up): MAG_ROLL, ACC_ROLL and GYRO_ROLL goes up MAG_Z and ACC_Z goes down TILT the MULTI forward (tail up): MAG_PITCH, ACC_PITCH and GYRO_PITCH goes up MAG_Z and ACC_Z goes down Rotating the copter clockwise (YAW): GYRO_YAW goes up The...
- Sun Mar 25, 2012 6:47 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
wilco1967 wrote:Cronalex wrote:with version 1.9 I don't have these problems... yes sensor orientation is ok (GUI)
are you sure ?
the orientation was changed between 1.9 and 2.0 on a lot of sensors.
http://www.multiwii.com/faq#How_should_ ... directions
yes is ok orientation... I use the crius Se and I defined the voice crius SE In the config.h
- Sun Mar 25, 2012 6:41 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
with version 1.9 I don't have these problems... yes sensor orientation is ok (GUI)
- Sun Mar 25, 2012 6:27 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107942
Re: MultiWii 2.0 is coming
hi, i have a multiwii crius se i have charged multiwii relase 2.0 but i have a problem when start my quadcopter and give power to motor the quad do a flip forward but if i charge 1.9 version it's ok have you an idea for my problem? If you are using level mode, calibrate ACC before use! no level mod...