Congrats EOSBandi,
it works with my bluetooth setup @115.200 with flyduino bluetooth interface.
Search found 31 matches
- Thu Jun 21, 2012 10:51 am
- Forum: Software development
- Topic: WinGUI 2.1 Beta is released for testing
- Replies: 96
- Views: 29165
- Wed Jun 20, 2012 8:50 pm
- Forum: Software development
- Topic: MultiWii_dev_20120618 compile error
- Replies: 3
- Views: 1256
Re: MultiWii_dev_20120618 compile error
I also get compile errors if i activate vbat function....
- Sat Jun 16, 2012 8:24 pm
- Forum: Software development
- Topic: WinGUI 2.1 Beta is released for testing
- Replies: 96
- Views: 29165
- Sat Jun 16, 2012 12:45 pm
- Forum: Software development
- Topic: WinGUI 2.1 Beta is released for testing
- Replies: 96
- Views: 29165
Re: WinGUI 2.1 Beta is released for testing
Unfortunately WinGui hangs when using bluetooth connection. After connecting the parameters are shown, but then the program hangs.
It works with FTDI direct connection.
I am using XP SP3. Bluetooth works flawless with normal Gui.
Anybody experiences the same problem ?
Regards
Joachim
It works with FTDI direct connection.
I am using XP SP3. Bluetooth works flawless with normal Gui.
Anybody experiences the same problem ?
Regards
Joachim
- Mon May 28, 2012 8:57 pm
- Forum: Software development
- Topic: Changes & additions
- Replies: 13
- Views: 4231
Re: Changes & additions
@Tifani: I am sorry, but i fully agree. I also acknowledge the time and work the programmers spent to get things working. I am using a Drotek IMU 10DOF - MPU6050 + HMC5883 + MS5611 and am disappointed with the behaviour of my quad so far. I was one of the first reporting that the MPU6050 was not pro...
- Sat May 19, 2012 10:55 am
- Forum: Ideas
- Topic: Changing PID Values with a Pot
- Replies: 73
- Views: 55941
Re: Changing PID Values with a Pot
That would be a very handy and helpful thing.
Also the Mikrocopter guys have this kind of feature.
Also the Mikrocopter guys have this kind of feature.
- Thu May 03, 2012 6:29 pm
- Forum: General discussions
- Topic: Unflyable after clearing eeprom
- Replies: 6
- Views: 3869
Re: Unflyable after clearing eeprom
Maybe you should set your trims of the gimbals to zero and start calibrating acro and acc mode again.
I had the same problem that my copter tilted to one side in acro mode without doing anything.
Setting the trims to zero and calibrating again helped.
Joachim
I had the same problem that my copter tilted to one side in acro mode without doing anything.
Setting the trims to zero and calibrating again helped.
Joachim
- Tue May 01, 2012 2:06 pm
- Forum: Software development
- Topic: MultiWii DEV 20120430
- Replies: 40
- Views: 16462
Re: MultiWii DEV 20120430
Tried it today! Simply perfect FlyduinoMega with FreeIMU04.3, re-flashed HKF20A ESC'a, Spektrum Satellite receiver. 20A esc's, 1050KV motors, 10 x 4.5 props, 2200mAh 30C battery. (MPU6050 Lowpass set to 42Hz) On top of my quad, is a Sony CX110HD video camera with 0.38 wide angle lens, zoomed in, so...
- Tue May 01, 2012 6:34 am
- Forum: Software development
- Topic: MultiWii DEV 20120430
- Replies: 40
- Views: 16462
Re: MultiWii DEV 20120430
Anybody out there flown with 6050 sensor already ?
What about ACC Mode ?
What about ACC Mode ?
- Tue Apr 24, 2012 3:27 pm
- Forum: Software development
- Topic: WinGUI public beta
- Replies: 132
- Views: 68291
Re: WinGUI public beta
Cant wait to use your GUI again for the new dev !
- Sat Apr 21, 2012 1:02 pm
- Forum: Software development
- Topic: MultiWii 2.0 bug report
- Replies: 99
- Views: 45315
Re: MultiWii 2.0 bug report
Hi, can you try to remove this line in multiwii.ino (from 2.0): PTerm = constrain(PTerm,-D8[PIDLEVEL]*5,+D8[PIDLEVEL]*5); With this, you should have exactly the same behavior of 1.9 stable mode. can you ensure also that when the multi is reverted, Z ACC is negative and equal in absolute to the valu...
- Sat Apr 21, 2012 10:31 am
- Forum: Software development
- Topic: WinGUI public beta
- Replies: 132
- Views: 68291
Re: WinGUI public beta
Hi Eosbandi,
i cant seem to get your GUI to work with the newest 2.0 dev of April 14.
I get an error that there is no valid answer from the FC.
Can anybody out there confirm this ?
Regards
Joachim
i cant seem to get your GUI to work with the newest 2.0 dev of April 14.
I get an error that there is no valid answer from the FC.
Can anybody out there confirm this ?
Regards
Joachim
- Tue Apr 17, 2012 4:01 pm
- Forum: Software development
- Topic: MultiWii 2.0 bug report
- Replies: 99
- Views: 45315
Re: MultiWii 2.0 bug report
Marc, i cant see how your video contributes to my problem. It shows a Multiwiicopter which is flying wihout any glitches in stable mode... I think most of the users have have this sort of behaviour... In the meantime I know several people with the toilet bowl effect problem and as our copter does no...
- Mon Apr 16, 2012 5:10 pm
- Forum: Software development
- Topic: MultiWii 2.0 bug report
- Replies: 99
- Views: 45315
Re: MultiWii 2.0 bug report
Ok once more about tbe: in the German FPV-Forum there is a 7-page thread about this issue: m Maybe google can help you with translation. The last report is as follows: User rc-action_de has three copter, all more or less unflyable in acc mode with 2.0: "TBE is the same with me at 3 Coptern. Cri...
- Mon Apr 16, 2012 10:07 am
- Forum: Software development
- Topic: MultiWii 2.0 bug report
- Replies: 99
- Views: 45315
Re: MultiWii 2.0 bug report
More and more people report about the toilet bow effect they experience with 2.0 and ACC. Alex can you seriously look into the matter ? Changing PID simply doesnt help. In 1.9 there is no such behaviour. Thanks Joachim As long as I can't reproduce this problem, I can't help Main difference between ...
- Fri Apr 13, 2012 6:16 pm
- Forum: Software development
- Topic: MultiWii 2.0 bug report
- Replies: 99
- Views: 45315
Re: MultiWii 2.0 bug report
More and more people report about the toilet bow effect they experience with 2.0 and ACC. Alex can you seriously look into the matter ? Changing PID simply doesnt help. In 1.9 there is no such behaviour. Thanks Joachim Really strange - it should only affect the differential between motors e.g betwe...
- Sun Apr 08, 2012 1:43 pm
- Forum: Shields, boards and sensors
- Topic: Problem compiling 2.0 with new Drotek IMU
- Replies: 5
- Views: 2433
Re: Problem compiling 2.0 with new Drotek IMU
This is not the new Drotek 10DOF IMU. The newest one is using MPU 6050 instead of ITG3200 and BMA180....
So even in 2.0 release it is not included
So even in 2.0 release it is not included
- Fri Apr 06, 2012 11:00 pm
- Forum: Software development
- Topic: MultiWii 2.0 bug report
- Replies: 99
- Views: 45315
Re: MultiWii 2.0 bug report
More and more people report about the toilet bow effect they experience with 2.0 and ACC.
Alex can you seriously look into the matter ? Changing PID simply doesnt help.
In 1.9 there is no such behaviour.
Thanks
Joachim
Alex can you seriously look into the matter ? Changing PID simply doesnt help.
In 1.9 there is no such behaviour.
Thanks
Joachim
- Fri Apr 06, 2012 9:50 am
- Forum: Connecting elements
- Topic: Buzzer question
- Replies: 9
- Views: 6893
Buzzer question
Can i connect the following buzzer directly to the arduino board: http://www.emartee.com/product/41835/Mini%20Buzzer Maximum current will be 30 mA. The question now is where to connect the buzzer to ? I assume i need an additional buzzer.pde which i have downloaded from the multiwiii svn. Regards Jo...
- Fri Apr 06, 2012 8:51 am
- Forum: Shields, boards and sensors
- Topic: Problem compiling 2.0 with new Drotek IMU
- Replies: 5
- Views: 2433
Re: Problem compiling 2.0 with new Drotek IMU
Oh boy, i found the problem: I added the code for the Drotek IMU at the end of the def.h and i get those errors..
If i add the code just behind the last IMU defined in def.h , i.e. crius_se everything compiles wihtout errors.
Sorry !
If i add the code just behind the last IMU defined in def.h , i.e. crius_se everything compiles wihtout errors.
Sorry !
- Fri Apr 06, 2012 7:01 am
- Forum: Shields, boards and sensors
- Topic: Problem compiling 2.0 with new Drotek IMU
- Replies: 5
- Views: 2433
Re: Problem compiling 2.0 with new Drotek IMU
Ok this is what i did: i added in def.h: #if defined(DROTEK_10DOF_MPU) #define MPU6050 #define HMC5883 #define MS561101BA #define ACC_ORIENTATION(X, Y, Z) {accADC[ROLL] = Y; accADC[PITCH] = -X; accADC[YAW] = Z;} #define GYRO_ORIENTATION(X, Y, Z) {gyroADC[ROLL] = X; gyroADC[PITCH] = Y; gyroADC[YAW] =...
- Thu Apr 05, 2012 6:16 pm
- Forum: Shields, boards and sensors
- Topic: Problem compiling 2.0 with new Drotek IMU
- Replies: 5
- Views: 2433
Problem compiling 2.0 with new Drotek IMU
Hi , i have just got the new Drotek DROTEK_10DOF_MPU IMU with the new MPU sensor. I have changed the sketch according to the suggestions at microcopters.de. During compile i get the error which is shown on the attached screenshoot. Something is wrong with the magnetic sensor definition i assume... A...
- Sun Apr 01, 2012 10:27 am
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107007
Re: MultiWii 2.0 is coming
At the end of the day i sadly switched back to 1.9...
There are too many bugs in 2.0 for me so i cannot fly my quad without
problems.
Maybe i try it again with another IMU which i have just ordered from Drotek...
There are too many bugs in 2.0 for me so i cannot fly my quad without
problems.
Maybe i try it again with another IMU which i have just ordered from Drotek...
- Mon Mar 26, 2012 9:29 pm
- Forum: Software development
- Topic: mw 2.0 is avalaible
- Replies: 10
- Views: 4513
Re: mw 2.0 is avalaible
Regarding my problem with the toilet bow effect when ACC is switched on with BMA020 i have now used the sensor.pde of 1.9 version out of frustration.... and voila, it looks like the problem is gone... Before that i have changed the config of the BMA020 in sensor to the old values in sensor.pde file ...
- Sun Mar 25, 2012 4:32 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107007
Re: MultiWii 2.0 is coming
...and i cannot use it because of the toilet bow effect with ACC on and BMA020... Looks like if have to get other sensors..... Maybe a bit of debugging and fixing the problem is an option too One yaw rotation in 20 seconds is not much. Did you already try to compensate with trim? Does the level fun...
- Sun Mar 25, 2012 4:03 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107007
Re: MultiWii 2.0 is coming
Alexinparis wrote:I hope the number of remaining bugs is low, because 2.0 is now released
...and i cannot use it because of the toilet bow effect with ACC on and BMA020...
Looks like if have to get other sensors.....
- Fri Mar 23, 2012 11:26 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107007
Re: MultiWii 2.0 is coming
copterrichie wrote:
Is there a remote possibility that the BMA020 is defective?
I dont think so. It works with 1.9 without any issue.
- Fri Mar 23, 2012 6:46 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107007
Re: MultiWii 2.0 is coming
I am just changing from MK to Multiwii and have changed from 1.9 to pre4. I am using a quad with BMA020, WMO and D&I Board. After changing the direction for ACC-Roll and ACC-Pitch and calibration of the acc i recognized that ACC-Z is only around 64 instead of 256 with 1.9. Is that correct ?. ye...
- Thu Mar 22, 2012 9:48 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107007
Re: MultiWii 2.0 is coming
The direction of the amplitude is not the problem, i have changed the direction accordingly The real problem is the toilet bowl effect when ACC is activated. My quad turns around the yaw axis slowly, maybe in 20 seconds time. I am not able to get rid of this movement by changing pid values. I dont h...
- Thu Mar 22, 2012 6:17 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107007
Re: MultiWii 2.0 is coming
Alex, please explain what you have changed from 1.9 to 2.0pre4 so as my WMP and BMA020 on D&I board are not working proberly anymore. I understood that you have changed some code so "it maches with the datasheet" (whatever that means). I have changed the direction for acc roll and yaw....
- Tue Mar 20, 2012 7:59 pm
- Forum: Software development
- Topic: MultiWii 2.0 is coming
- Replies: 256
- Views: 107007
Re: MultiWii 2.0 is coming
I am just changing from MK to Multiwii and have changed from 1.9 to pre4. I am using a quad with BMA020, WMO and D&I Board. After changing the direction for ACC-Roll and ACC-Pitch and calibration of the acc i recognized that ACC-Z is only around 64 instead of 256 with 1.9. Is that correct ?. I f...