Search found 31 matches

by Joachim08
Thu Jun 21, 2012 10:51 am
Forum: Software development
Topic: WinGUI 2.1 Beta is released for testing
Replies: 96
Views: 29158

Re: WinGUI 2.1 Beta is released for testing

Congrats EOSBandi,

it works with my bluetooth setup @115.200 with flyduino bluetooth interface.
by Joachim08
Wed Jun 20, 2012 8:50 pm
Forum: Software development
Topic: MultiWii_dev_20120618 compile error
Replies: 3
Views: 1256

Re: MultiWii_dev_20120618 compile error

I also get compile errors if i activate vbat function....
by Joachim08
Sat Jun 16, 2012 12:45 pm
Forum: Software development
Topic: WinGUI 2.1 Beta is released for testing
Replies: 96
Views: 29158

Re: WinGUI 2.1 Beta is released for testing

Unfortunately WinGui hangs when using bluetooth connection. After connecting the parameters are shown, but then the program hangs.
It works with FTDI direct connection.
I am using XP SP3. Bluetooth works flawless with normal Gui.
Anybody experiences the same problem ?

Regards

Joachim
by Joachim08
Mon May 28, 2012 8:57 pm
Forum: Software development
Topic: Changes & additions
Replies: 13
Views: 4231

Re: Changes & additions

@Tifani: I am sorry, but i fully agree. I also acknowledge the time and work the programmers spent to get things working. I am using a Drotek IMU 10DOF - MPU6050 + HMC5883 + MS5611 and am disappointed with the behaviour of my quad so far. I was one of the first reporting that the MPU6050 was not pro...
by Joachim08
Sat May 19, 2012 10:55 am
Forum: Ideas
Topic: Changing PID Values with a Pot
Replies: 73
Views: 55800

Re: Changing PID Values with a Pot

That would be a very handy and helpful thing.
Also the Mikrocopter guys have this kind of feature.
by Joachim08
Thu May 03, 2012 6:29 pm
Forum: General discussions
Topic: Unflyable after clearing eeprom
Replies: 6
Views: 3869

Re: Unflyable after clearing eeprom

Maybe you should set your trims of the gimbals to zero and start calibrating acro and acc mode again.
I had the same problem that my copter tilted to one side in acro mode without doing anything.
Setting the trims to zero and calibrating again helped.

Joachim
by Joachim08
Tue May 01, 2012 2:06 pm
Forum: Software development
Topic: MultiWii DEV 20120430
Replies: 40
Views: 16459

Re: MultiWii DEV 20120430

Tried it today! Simply perfect FlyduinoMega with FreeIMU04.3, re-flashed HKF20A ESC'a, Spektrum Satellite receiver. 20A esc's, 1050KV motors, 10 x 4.5 props, 2200mAh 30C battery. (MPU6050 Lowpass set to 42Hz) On top of my quad, is a Sony CX110HD video camera with 0.38 wide angle lens, zoomed in, so...
by Joachim08
Tue May 01, 2012 6:34 am
Forum: Software development
Topic: MultiWii DEV 20120430
Replies: 40
Views: 16459

Re: MultiWii DEV 20120430

Anybody out there flown with 6050 sensor already ?
What about ACC Mode ?
by Joachim08
Tue Apr 24, 2012 3:27 pm
Forum: Software development
Topic: WinGUI public beta
Replies: 132
Views: 68132

Re: WinGUI public beta

Cant wait to use your GUI again for the new dev !
by Joachim08
Sat Apr 21, 2012 1:02 pm
Forum: Software development
Topic: MultiWii 2.0 bug report
Replies: 99
Views: 45303

Re: MultiWii 2.0 bug report

Hi, can you try to remove this line in multiwii.ino (from 2.0): PTerm = constrain(PTerm,-D8[PIDLEVEL]*5,+D8[PIDLEVEL]*5); With this, you should have exactly the same behavior of 1.9 stable mode. can you ensure also that when the multi is reverted, Z ACC is negative and equal in absolute to the valu...
by Joachim08
Sat Apr 21, 2012 10:31 am
Forum: Software development
Topic: WinGUI public beta
Replies: 132
Views: 68132

Re: WinGUI public beta

Hi Eosbandi,
i cant seem to get your GUI to work with the newest 2.0 dev of April 14.
I get an error that there is no valid answer from the FC.

Can anybody out there confirm this ?

Regards

Joachim
by Joachim08
Tue Apr 17, 2012 4:01 pm
Forum: Software development
Topic: MultiWii 2.0 bug report
Replies: 99
Views: 45303

Re: MultiWii 2.0 bug report

Marc, i cant see how your video contributes to my problem. It shows a Multiwiicopter which is flying wihout any glitches in stable mode... I think most of the users have have this sort of behaviour... In the meantime I know several people with the toilet bowl effect problem and as our copter does no...
by Joachim08
Mon Apr 16, 2012 5:10 pm
Forum: Software development
Topic: MultiWii 2.0 bug report
Replies: 99
Views: 45303

Re: MultiWii 2.0 bug report

Ok once more about tbe: in the German FPV-Forum there is a 7-page thread about this issue: m Maybe google can help you with translation. The last report is as follows: User rc-action_de has three copter, all more or less unflyable in acc mode with 2.0: "TBE is the same with me at 3 Coptern. Cri...
by Joachim08
Mon Apr 16, 2012 10:07 am
Forum: Software development
Topic: MultiWii 2.0 bug report
Replies: 99
Views: 45303

Re: MultiWii 2.0 bug report

More and more people report about the toilet bow effect they experience with 2.0 and ACC. Alex can you seriously look into the matter ? Changing PID simply doesnt help. In 1.9 there is no such behaviour. Thanks Joachim As long as I can't reproduce this problem, I can't help Main difference between ...
by Joachim08
Fri Apr 13, 2012 6:16 pm
Forum: Software development
Topic: MultiWii 2.0 bug report
Replies: 99
Views: 45303

Re: MultiWii 2.0 bug report

More and more people report about the toilet bow effect they experience with 2.0 and ACC. Alex can you seriously look into the matter ? Changing PID simply doesnt help. In 1.9 there is no such behaviour. Thanks Joachim Really strange - it should only affect the differential between motors e.g betwe...
by Joachim08
Sun Apr 08, 2012 1:43 pm
Forum: Shields, boards and sensors
Topic: Problem compiling 2.0 with new Drotek IMU
Replies: 5
Views: 2433

Re: Problem compiling 2.0 with new Drotek IMU

This is not the new Drotek 10DOF IMU. The newest one is using MPU 6050 instead of ITG3200 and BMA180....

So even in 2.0 release it is not included
by Joachim08
Fri Apr 06, 2012 11:00 pm
Forum: Software development
Topic: MultiWii 2.0 bug report
Replies: 99
Views: 45303

Re: MultiWii 2.0 bug report

More and more people report about the toilet bow effect they experience with 2.0 and ACC.
Alex can you seriously look into the matter ? Changing PID simply doesnt help.
In 1.9 there is no such behaviour.

Thanks

Joachim
by Joachim08
Fri Apr 06, 2012 9:50 am
Forum: Connecting elements
Topic: Buzzer question
Replies: 9
Views: 6893

Buzzer question

Can i connect the following buzzer directly to the arduino board: http://www.emartee.com/product/41835/Mini%20Buzzer Maximum current will be 30 mA. The question now is where to connect the buzzer to ? I assume i need an additional buzzer.pde which i have downloaded from the multiwiii svn. Regards Jo...
by Joachim08
Fri Apr 06, 2012 8:51 am
Forum: Shields, boards and sensors
Topic: Problem compiling 2.0 with new Drotek IMU
Replies: 5
Views: 2433

Re: Problem compiling 2.0 with new Drotek IMU

Oh boy, i found the problem: I added the code for the Drotek IMU at the end of the def.h and i get those errors..

If i add the code just behind the last IMU defined in def.h , i.e. crius_se everything compiles wihtout errors.

Sorry !
by Joachim08
Fri Apr 06, 2012 7:01 am
Forum: Shields, boards and sensors
Topic: Problem compiling 2.0 with new Drotek IMU
Replies: 5
Views: 2433

Re: Problem compiling 2.0 with new Drotek IMU

Ok this is what i did: i added in def.h: #if defined(DROTEK_10DOF_MPU) #define MPU6050 #define HMC5883 #define MS561101BA #define ACC_ORIENTATION(X, Y, Z) {accADC[ROLL] = Y; accADC[PITCH] = -X; accADC[YAW] = Z;} #define GYRO_ORIENTATION(X, Y, Z) {gyroADC[ROLL] = X; gyroADC[PITCH] = Y; gyroADC[YAW] =...
by Joachim08
Thu Apr 05, 2012 6:16 pm
Forum: Shields, boards and sensors
Topic: Problem compiling 2.0 with new Drotek IMU
Replies: 5
Views: 2433

Problem compiling 2.0 with new Drotek IMU

Hi , i have just got the new Drotek DROTEK_10DOF_MPU IMU with the new MPU sensor. I have changed the sketch according to the suggestions at microcopters.de. During compile i get the error which is shown on the attached screenshoot. Something is wrong with the magnetic sensor definition i assume... A...
by Joachim08
Sun Apr 01, 2012 10:27 am
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106992

Re: MultiWii 2.0 is coming

At the end of the day i sadly switched back to 1.9...
There are too many bugs in 2.0 for me so i cannot fly my quad without
problems.

Maybe i try it again with another IMU which i have just ordered from Drotek...
by Joachim08
Mon Mar 26, 2012 9:29 pm
Forum: Software development
Topic: mw 2.0 is avalaible
Replies: 10
Views: 4513

Re: mw 2.0 is avalaible

Regarding my problem with the toilet bow effect when ACC is switched on with BMA020 i have now used the sensor.pde of 1.9 version out of frustration.... and voila, it looks like the problem is gone... Before that i have changed the config of the BMA020 in sensor to the old values in sensor.pde file ...
by Joachim08
Sun Mar 25, 2012 4:32 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106992

Re: MultiWii 2.0 is coming

...and i cannot use it because of the toilet bow effect with ACC on and BMA020... Looks like if have to get other sensors..... Maybe a bit of debugging and fixing the problem is an option too One yaw rotation in 20 seconds is not much. Did you already try to compensate with trim? Does the level fun...
by Joachim08
Sun Mar 25, 2012 4:03 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106992

Re: MultiWii 2.0 is coming

Alexinparis wrote:I hope the number of remaining bugs is low, because 2.0 is now released :)



...and i cannot use it because of the toilet bow effect with ACC on and BMA020...
Looks like if have to get other sensors.....
by Joachim08
Fri Mar 23, 2012 11:26 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106992

Re: MultiWii 2.0 is coming

copterrichie wrote:
Is there a remote possibility that the BMA020 is defective?


I dont think so. It works with 1.9 without any issue.
by Joachim08
Fri Mar 23, 2012 6:46 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106992

Re: MultiWii 2.0 is coming

I am just changing from MK to Multiwii and have changed from 1.9 to pre4. I am using a quad with BMA020, WMO and D&I Board. After changing the direction for ACC-Roll and ACC-Pitch and calibration of the acc i recognized that ACC-Z is only around 64 instead of 256 with 1.9. Is that correct ?. ye...
by Joachim08
Thu Mar 22, 2012 9:48 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106992

Re: MultiWii 2.0 is coming

The direction of the amplitude is not the problem, i have changed the direction accordingly The real problem is the toilet bowl effect when ACC is activated. My quad turns around the yaw axis slowly, maybe in 20 seconds time. I am not able to get rid of this movement by changing pid values. I dont h...
by Joachim08
Thu Mar 22, 2012 6:17 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106992

Re: MultiWii 2.0 is coming

Alex, please explain what you have changed from 1.9 to 2.0pre4 so as my WMP and BMA020 on D&I board are not working proberly anymore. I understood that you have changed some code so "it maches with the datasheet" (whatever that means). I have changed the direction for acc roll and yaw....
by Joachim08
Tue Mar 20, 2012 7:59 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 106992

Re: MultiWii 2.0 is coming

I am just changing from MK to Multiwii and have changed from 1.9 to pre4. I am using a quad with BMA020, WMO and D&I Board. After changing the direction for ACC-Roll and ACC-Pitch and calibration of the acc i recognized that ACC-Z is only around 64 instead of 256 with 1.9. Is that correct ?. I f...