Search found 11 matches
- Mon Apr 08, 2013 8:23 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 621189
Re: MultiWii EZ-GUI
Giles, I'm using the same board and I²C GPS setup. When I saw the options on the app of Ezio I also wanted to give it a go with the WP via the map and ran into exactly the same issues. Unfortunately it is not possible to use waypoints with an I²C setup, unless this has changed very recently (do corr...
- Sun Mar 31, 2013 2:57 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 621189
Re: MultiWii EZ-GUI
Hi ezio, Just tested your app with USB support. I hooked a 3DR radio up to my Galaxy tab2 via the OTG cable and connection to the quad was just fine. However when scrolling between the tabs I noticed the app stops responding and reports "MultiWii EZ-Gui has stopped". Apart from that it is ...
- Fri Mar 29, 2013 8:41 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 621189
Re: MultiWii EZ-GUI
Ezio,
Good news to hear that the serial USB is working.
Just received my Crius AIO with GPS and ready to hook up the 3DR radio.
I'll be happy to test it.
Regards
Good news to hear that the serial USB is working.
Just received my Crius AIO with GPS and ready to hook up the 3DR radio.
I'll be happy to test it.
Regards
- Thu Mar 14, 2013 3:04 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 621189
Re: MultiWii EZ-GUI
This is a nice and very usefull app. The only drawback I have is the limited range of the bluetooth, moreover now the waypont features can be used. Are there plans to add USB support so the 3DR radio's can be used? This would increase the range quite a bit. You will also be able to monitor the quad ...
- Sun Mar 03, 2013 11:24 pm
- Forum: MultiWii tweaking - flying experience
- Topic: Multiwii 2.2 - GPS hold
- Replies: 93
- Views: 124571
Multiwii 2.2 - GPS hold
Hi, Today I've been able to test the new 2.2 pre, now the weather gets better here. Quad is equiped with Crius SE, I²C card for GPS and Ublox. The quad flies very stable in angle, horizon and alt hold. I do have a question regarding the Poshold. When I set it with the nose in the wind: no issue, hol...
- Wed Jun 13, 2012 8:03 am
- Forum: ESCs, propellers , servos and radios
- Topic: Spectrum satelite (gear channel)
- Replies: 3
- Views: 1659
Re: Spectrum satelite (gear channel)
Made a mistake.
I meant to map aux3 knob on the DX8 to be used with the AUX4.
I meant to map aux3 knob on the DX8 to be used with the AUX4.
- Tue Jun 12, 2012 9:54 am
- Forum: ESCs, propellers , servos and radios
- Topic: Spectrum satelite (gear channel)
- Replies: 3
- Views: 1659
Spectrum satelite (gear channel)
I would like to implement a Spectrum satelite reciever with a Mega 2560 so I have access to all channels. I was wondering if you can reuse the gear channel (ch5) to be used for aux4? This will allow me to switch on some leds or anything else via aux4 (after assigning it via the GUI). Any thoughts a...
- Tue Jun 12, 2012 9:29 am
- Forum: Software development
- Topic: WinGUI 2.1 Beta is released for testing
- Replies: 96
- Views: 29163
Re: WinGUI 2.1 Beta is released for testing
Hey Eosbandi,
First of all thanks for the update.
Have been playing around with the new release and works very well.
Geo and logging options are also neat.
Makes me think I need some kind of telemetry to log the flights
Regards
First of all thanks for the update.
Have been playing around with the new release and works very well.
Geo and logging options are also neat.
Makes me think I need some kind of telemetry to log the flights
Regards
- Mon Apr 16, 2012 9:05 am
- Forum: Software development
- Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
- Replies: 65
- Views: 29297
Re: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
Hi, I tested the 400Hz version but still no joy on strange quad behaviour. Started again from scratch in balancing props and brushless motors. Very nice result. Quad is airborn without any problem. Heretic behaviour of the esc's was due to vibrations causing the gyro to get false readings. Resulting...
- Fri Apr 13, 2012 12:33 pm
- Forum: Software development
- Topic: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
- Replies: 65
- Views: 29297
Re: Run MultiWii @ 400 Hz - Very Important - ESC - Solution!
Hi guys, I build a quadcopter based on the Crius board with 10A Hobbywing esc and MW 2.0 It flies just perfect. So I build a bigger one with the multiwii mega board + Turnigy Plush 18A + KEDA 22 10 brushless motors + MW 2.0 It is just all over the place. I have to struggle to keep it in the air. Her...
- Thu Apr 12, 2012 9:06 am
- Forum: Ideas
- Topic: Inflight ACC-calibration
- Replies: 127
- Views: 72408
Re: Inflight ACC-calibration
Hi, The inflight acc-calibration is working great. Quad stays rock solid, no drift. Afterwards activated the 'alt hold' --> hands off hovering Great coding job Next to test is my other quad with the Mega board + GPS... hoping for some good wheather Version 2.0 Crius Multiwii SE Keda 20-50S 8A 1088kv...