MultiWii

Fr3d hello, thanks for helping the orientation of my sensors is: m In this forum a colleague told me that version 2.0 for the orientation of the sensors changes. I would need pictures to know how to guide them, because I do not understand "ACC_PITCH and GYRO_PITCH goes up". For all that do...

Hi PatrikE, I am giving the war .... Thanks for your constant help. Connect land as the following scheme: m Connect the negative of the accelerometer to wmp, all the accelerometer connections go to wmp. As the scheme connect the negative of the sensors and arduino to the negative of an ESC, but not ...

Hello friends I can not blow my quadricopter in any way. The problem is that after starting, the minimum speed motors accelerate randomly (calibrated on a table). I thought it could be because of the vibrations, but if I cut the sensors and leave on the table is the same. I can not try to take off. ...

hello mgros I will go over all connections quadricopter. I will pay particular attention to Connection Between RX and Arduino in YAW. If not working properly, try to record a new video in case anyone can help me ..... although I do not know which test recording. Took several weeks stuck with this qu...

Hi, I have a big problem: my quadricopter is crazy. No engine start GUI behavior is correct: values ​​of the station, quadricopter position ... 1 - video without engines and GUI: m My problem appears when I start the engine, video GUI and without moving the engine (if I put an inclination to see the...

... Now I think maybe my problem has always been the vibration ... When I put the finger on notice much vibration sensors, though not enough to know if the quadricopter trot like a horse m --> video vibration What do you think? ---------------------------------- more information --------------------...

If you use WMP + NUNCHACK ... Comment this line. #define NUNCHACK // if you want to use the nunckuk as a standalone I2C ACC without WMP The NUNCHACK will work automaticly together with WMP. Your setup should work without any changes in the original Config.h You can test to create a new config with ...

noooooo ....... oooooooooooo PatrikE I'll marry you!

Also going to help me with this? .......... thanks

I will try and inform you

hi Hamburger, This is the orientation of my sensors: m I do not understand I have to change with the following information: MAG_ROLL, ACC_ROLL and GYRO_ROLL goes up MAG_Z and ACC_Z goes down TILT the MULTI forward (tail up): MAG_PITCH, ACC_PITCH and GYRO_PITCH goes up MAG_Z and ACC_Z goes down Rotat...

Hello Loosi ,

I am now using 2.0 multiwii

wmp and Nunchuk are connected to 5 V.

I know nothing about "internal pullups"

config.h complete:

https://docs.google.com/document/d/1_tf ... IONjw/edit


thanks for help.

Hi, I'm Spanish, I have a problem and I'm going crazy. I do not see that happening. My quadricopter is built with an Arduino Pro Mini, and wmp sensors use the original and the original Nunchuk. The first thing I press the button calibration, quadricopter this on a table level surface, the problem: 1...

ronco Thanks, your solution seems a sure thing. First I will try the solution Patrik, but if I fail, as I said welding ronco. Patrik as you know so much code? thanks for your solution and time, I think this week I can fix it perfectly. Good people around here willing to help .... Thanks to all frien...

PatrikE Thanks for your help, but that way I get nothing. ooooOOOOooooOOOOOOOoo ...... thanks ronco !!! Your code by convincing. I tried several times to change, but I could not. I'm programmer and work in Java, the language of multiwii do not know, but I see you're in control. With your help I will...

I will try as soon as possible
It seems much easier than I imagined, but unknowingly ...
I'll tell you when I can prove it. I will use the V2 multiwii

PatrikE Thanks!

PatrikE Thanks! no one had answered this question. The version I use is MultiWii_dev_20120203, the variable 'PWM_PIN uint8_t [8]' does not exist. Any version of multiwii is good for me, I have no sensors. Can you tell me which version you use? which is the version where the variable appears 'PWM_PIN...

Hello friends, I'm Spanish. It broke my arduino pin 5 MEGA and I broke the pin 10 of Arduino Pro Mini, they are both motor output. I do not know MULTIWII change the code to change the pin engine, anyone know how? someone can tell me where I can read and learn? I just need to change a motor. Thanks, ...