Search found 44 matches
- Tue Oct 06, 2015 3:01 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Sounds like driver issues to me,the "no response from bootloader.Programming:failed" indicates driver not seeing it, check in device manager and make sure the driver shows in Ports when you connect to the FC. Apart from that i cant help you,sorry!
- Sun Oct 04, 2015 11:21 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
I fully understand the co-operative nature of the open source system as superbly demonstrated in the whole multiwii project. BUT and its a big but to me, is the lack of respect and appreciation of all the work tc has put in.Nobody wanted to know 32 bit stuff back then, but tc did all the work and bu...
- Sun Sep 27, 2015 4:55 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
@mzim. you obviously have a defective board, show that image to whoever supplied you with the board and ask for a replacement.There shouldn't be any problems as a picture is worth a thousand words and it looks broke to me. P.S. Dont show a cleanflight image on this thread its Baseflight only,not bei...
- Sat Sep 26, 2015 10:15 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
So How much does Dominic pay you? its crazy, timecop does all the work and develops baseflight mainly by himself and Dominic Clifton comes along adds some pretty little led's,renames a few functions and calls it cleanflight. cant you all see that you are being conned, cleanflight is baseflight no if...
- Thu Sep 10, 2015 12:08 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re:
Baseflight is slipping into obsolescence, slow but sure. Naze32 is still relevant, but mostly run its course. Rev6 should have been an F3. So are you saying Cleanflight is the new replacement and is taking over from Baseflight ? and the Naze32 is coming to the end of its days if so what is it super...
- Wed Sep 09, 2015 5:54 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Whats going on? doesnt anyone use this thread anymore and if so WHY not? FFS if it wasnt for the man we would be still in the dark ages flying 8 bit steam powered multicopters.I suppose you are all gone over to cleanflight, well i say if it aint broke dont fix it and baseflights OK in my book,No not...
- Wed Sep 02, 2015 6:50 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Posting reply to myself(sad init) i reflashed an old baseflight hex from 2013 and everything working again.I thought updates were supposed to make things better not break things, maybe its an old board(white one)
- Wed Sep 02, 2015 5:35 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Hi, Not posted here for a long time.Anyway Just updated my afromini32 (tri) to latest firmware and my servo no longer works, everything else is fine all the motors do what they should just no yaw because the servo isnt operating and it was immediately before the update. It centers itself if i physic...
- Tue Sep 16, 2014 2:55 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
timecop wrote:Yes, board_align_yaw is what you need, should be able to set it to 45 or -45, and it should do what you want.
Thanks tc, 45 didnt work, didnt think of -45 so did 315 and that worked. Chuffed that ive got the old Free Flight board going again.
- Mon Sep 15, 2014 4:31 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Hi, OK bite my head off but this question isnt about naze32 but the original Free Flight board on which the naze32 was based. I found it abandoned in the drawer and decided to try to resurrect it. So i have flashed the F/F board with the baseflight configurator and all i want to know is how to move ...
- Sat Jul 06, 2013 11:49 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Who is zelea2 ? and what do we care what you think! So tc beats the Chinese at what many consider to be there own game, I.E he cloned one of their products and sold the clone cheaper than the original F/F even though it was built with superior components, wrote an interface compatible with multiwii....
- Mon Jul 01, 2013 8:49 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Hiya, Hey cyberpilot360 if everything is OK in the Gui then it has to be the esc's causing your problem(assuming everything is connected right) Is tranny set up right, have esc's been taught their settings. Tc on the same subject, when the Acromini32 is set to Quadx or Y4 i can only get 3 motors to ...
- Fri Jun 21, 2013 12:07 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
I dont know because my time with CopterControl was very short HeHe. I upset them and got thrown out of the forum ,Ahh those were the Days
- Wed Jun 19, 2013 3:29 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Thanks tc that works fine on my mini tri, given up on the wing for the mo, might try again later but not really bothered.
- Wed Jun 19, 2013 1:38 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Thanks tc at least i was on the right track there, gonna flash baseflight r304 and see if i can get throttle to work, else ill try the openaero32 code and see if i can make that work.
- Wed Jun 19, 2013 1:17 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Hiya Been very quiet here lately, people more interested in flying than codeing i presume. Ok i need help/advice here, The Afromini32 doesnt have any info in the manual at all. I know its a AcroNaze32 only smaller(thats what i like about it)but im confused by the motor/servo setup. Its marked on the...
- Wed Jan 30, 2013 4:56 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
@ jseyfert3 Hi, Love the simplicity of the build, well executed and clean, and judging by the video no real problems. I have to reverse several things in my tranny, its a Futaba ZAP9 with a FrSky module fitted so i think that is common and not really a problem if you can sort it via the tranny. Just...
- Mon Jan 21, 2013 1:52 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Since I connected all motors the same way, they are all spinning in the same direction. Can this be fixed by software, or do I have to change the wired connection? This is standard Multiwii stuff so look here m . you will find that questions not related to Naze32 will probably get ignored, dont get...
- Wed Jan 02, 2013 12:52 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Flying_wing
Hiya, Over the holiday i built a small flying wing and although there is a mix for it in the mixer list there is nothing in the manual about how to connect it up. I dont really want to experiment and brake something. There are only two servo's and the Esc . I would guess S1 and S2 for the servo's an...
- Fri Dec 21, 2012 5:37 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Hi,
I know im leaving myself open to all sorts of smart @ss comments here, but f#ck it
What is moron_threshold? when should i alter it and what to(aprox)
i thought it was a joke when tc mentioned it, but its in the cli so it obviously has a purpose. and im intrigued.
Ray
I know im leaving myself open to all sorts of smart @ss comments here, but f#ck it
What is moron_threshold? when should i alter it and what to(aprox)
i thought it was a joke when tc mentioned it, but its in the cli so it obviously has a purpose. and im intrigued.
Ray
- Fri Sep 07, 2012 11:10 am
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Bootloader shorting shouldn't be necessary unless you killed the existing firmware, the proper/easy way is sending 'R' then doing flash load. ... hm: for serial / CLI I use hercules software. Entering ## to sende the # works fine, but R or RR never worked. Maybe I should enter #R to tranfer this R ...
- Mon Sep 03, 2012 8:07 pm
- Forum: Boards
- Topic: Naze32 hardware discussion thread
- Replies: 3249
- Views: 1450121
Re: Naze32 hardware discussion thread
Hi, First let me say the way rcgroups treated TC was a disgrace, it was a witch hunt, and all because he said what he though and it upset some manufacturers(DJI) who obviously have a lot of clout within rcgroups. OK back on topic, I have 5 naze32's and i am a numbskull as far as programming is conce...
- Sun Sep 18, 2011 5:43 pm
- Forum: Software development
- Topic: Dev 9-3-2011
- Replies: 11
- Views: 4178
Re: Dev 9-3-2011
spagoziak wrote:I'm using an original wmp and a bma020 on 1.8 dev 9-13 with 1.7 stab enabled. It flies perfectly
Do you mean Dev 9-13 because i can only find dev 9-03 or was that a typo? if not where did you get it from!!!
- Sun Sep 18, 2011 3:30 am
- Forum: Software development
- Topic: Dev 9-3-2011
- Replies: 11
- Views: 4178
Re: Dev 9-3-2011
Hi, Love this DEV, using the v1.7 level option i can fly with level on again, i found v1.8 with level on very twitchy and oversensitive, and i did spend a long time trying to find a sweet spot to no avail. i do think my flying style doesnt help though. i normally fly with level on most of the time a...
- Mon Aug 29, 2011 12:31 am
- Forum: Shields, boards and sensors
- Topic: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
- Replies: 47
- Views: 20271
Re: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
ps can anyone tell me if the gyros and acc are better than mw+ numchuck cheers dave... Hi Dave, Personally i have never had any problems with the genuine WMP and also the clone with the itg3205 although it is a bit daunting dismantleing one for the first time. But for the price they cant be beat.On...
- Sat Jun 25, 2011 6:10 pm
- Forum: Shields, boards and sensors
- Topic: Magnetometer, How to use it
- Replies: 7
- Views: 6273
Re: Magnetometer, How to use it
Hi Alex, I thought that was how it was supposed to work, i will just have to play with the Mag setting until it does then. Am i right in thinking that once its set right it might as well be on all the time. Thought i ought to mention that i have been experimenting with dev20110622 and have been havi...
- Thu Jun 23, 2011 4:47 am
- Forum: Shields, boards and sensors
- Topic: Magnetometer, How to use it
- Replies: 7
- Views: 6273
Re: Magnetometer, How to use it
Hi, You can activate the magnetometer independently with other sensors. However, you need an ACC installed to have reliable MAG values. It's important to calibrate it before using it, but it's also important to move the copter in all direction during the calibration. Was it the case ? Hi Alex, Yes ...
- Wed Jun 22, 2011 7:31 pm
- Forum: Shields, boards and sensors
- Topic: Magnetometer, How to use it
- Replies: 7
- Views: 6273
Magnetometer, How to use it
Ok im wondering why i have IMU's and why i didn't just stick to Wii motion plus and BMA020. I have a Barometer which seems to do very little, infact i get a better height hold by turning it off and balancing it by eye, but of course that only really works at lowish levels. And the magnetometer is a ...
- Tue Jun 21, 2011 1:55 pm
- Forum: Shields, boards and sensors
- Topic: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
- Replies: 47
- Views: 20271
Re: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
Hi Well it took a while but we finally got there. The first board that i was sent had a fault, one of the caps was soldered on with reverse polarity. To be fair Alexander emailed me and told me about the fault and gave me the choice of reversing the cap myself or returning it, as i didnt feel confid...
- Mon May 16, 2011 9:41 pm
- Forum: Shields, boards and sensors
- Topic: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
- Replies: 47
- Views: 20271
Re: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
Aparently the mag is oriented the wrong way, but no problems Arnaldo has got code sorted for it:- Originally Posted by arnaldo26 change this code(in serial.pde 5008dev): #define MAG_ORIENTATION(X, Y, Z) {magADC[ROLL] = X; magADC[PITCH] = Y; magADC[YAW] = Z;} to #define MAG_ORIENTATION(X, Y, Z) {magA...
- Sun May 15, 2011 11:22 pm
- Forum: Shields, boards and sensors
- Topic: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
- Replies: 47
- Views: 20271
Re: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
Hi,
Pressed the buy button , Will give a report on it when it arrives and is fitted.
Ray
Pressed the buy button , Will give a report on it when it arrives and is fitted.
Ray
- Sat May 14, 2011 8:25 pm
- Forum: Shields, boards and sensors
- Topic: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
- Replies: 47
- Views: 20271
Re: All in one board: Hmc5883 bma180 bmp085 itg3200 only 99$
Hi, That Gui display looks good, so good i went on ebay for a closer look. They are $99.80 now and they have sold Five 3.3v boards and thirty plus 5v boards the 5v one has an LLC so its designed for 5v processors. I've talked myself into getting one now the only question is 3.3v or 5v and i cant see...
- Fri May 13, 2011 11:35 pm
- Forum: Shields, boards and sensors
- Topic: Tri on Flyduino
- Replies: 0
- Views: 1402
Tri on Flyduino
Hi, Put my new Flyduino in a tri frame i had and the Flyduino is dead because its getting no power. I followed Alex's mega instructions and the problem is the servo is on pin 2 and the flyduino uses that pin to get power so it expects an ESC on that pin to power the FC, so i need the servo on pin 3 ...
- Mon May 02, 2011 10:56 pm
- Forum: Connecting elements
- Topic: LCD Advice needed Please
- Replies: 1
- Views: 1829
LCD Advice needed Please
Hiya, My next stage is to learn to be able to adjust my multiwii's at the flying site using a LCD. What i need is advice on which lcd to get, I was thinking of the Textstar, but it is quite expensive, are there any other alternatives that work and can be recommended. Please bear in mind that i am no...
- Sun Apr 17, 2011 4:12 am
- Forum: Shields, boards and sensors
- Topic: Flyduino Mega
- Replies: 5
- Views: 3121
Re: Flyduino Mega
Thanks Alex, ive been struggling all day with the only motor pin out i could find on berkleys site and i knew it wasnt right, Hopefully i can get the flyduino airborne tomorrow.
Ray
Ray
- Sat Apr 16, 2011 9:36 pm
- Forum: Shields, boards and sensors
- Topic: Flyduino Mega
- Replies: 5
- Views: 3121
Re: Flyduino Mega
Hi Kayle,
LOL so do i with my pro mini's but the Flyduino is a new board that is just becoming available and it has different motor pins, if you look at the 1.7 sketch you will see you can select pro mini or mega because of the differences.
Thanks anyway, your heart is in the right place!
Ray
LOL so do i with my pro mini's but the Flyduino is a new board that is just becoming available and it has different motor pins, if you look at the 1.7 sketch you will see you can select pro mini or mega because of the differences.
Thanks anyway, your heart is in the right place!
Ray
- Sat Apr 16, 2011 8:54 pm
- Forum: Shields, boards and sensors
- Topic: Flyduino Mega
- Replies: 5
- Views: 3121
Flyduino Mega
Hi, I am one of the lucky people to have one of the beta flyduino's and so i have built a new frame etc for it. Its a quad in X config with 415 mm motor to motor(KDA20-50's) and herein lies my problem, i cant find the motor numbers for a quadX setup , can anyone enlighten me please as im so close to...
- Thu Mar 24, 2011 10:30 pm
- Forum: Software development
- Topic: MultiWii v1.preter7 released
- Replies: 22
- Views: 7516
Re: MultiWii v1.preter7 released
Thanks very much
- Thu Mar 24, 2011 9:08 pm
- Forum: Software development
- Topic: MultiWii v1.preter7 released
- Replies: 22
- Views: 7516
Re: MultiWii v1.preter7 released
Hi Alex , One of my quads has a four channel RX and in 1.6 i can force auto mode to be on all the time. This is great in particular for letting selected friends have a little go, as it is so easy to fly, anyway is there any way to do the same in this latest release. If not, is there anyway you could...
- Sun Feb 06, 2011 3:06 am
- Forum: Shields, boards and sensors
- Topic: multiwii software on aeroquad shield
- Replies: 5
- Views: 3438
Re: multiwii software on aeroquad shield
Hi Alex,
Thanks! it was a good idea that will have to wait until i know a lot more, but at least i know now, and i didn't damage anything.
Ray
Thanks! it was a good idea that will have to wait until i know a lot more, but at least i know now, and i didn't damage anything.
Ray
- Sun Feb 06, 2011 12:23 am
- Forum: Shields, boards and sensors
- Topic: multiwii software on aeroquad shield
- Replies: 5
- Views: 3438
multiwii software on aeroquad shield
Hi, I have a quad built using a mega 2560 and an aeroquad shield m it uses a ITG-3200 3 axis gyro a BMA180 acc and a BMP085 barometer. motors KDA 20 28 1050 kv at 550 mm motor to motor Hobbywing pentium 18 amp ESC 10x3.8 APC props Firmware Aeroquad v2.1 After a lot of messing around getting the sofw...
- Wed Feb 02, 2011 10:44 am
- Forum: Ideas
- Topic: Is this Right for Y4
- Replies: 4
- Views: 3000
Re: Is this Right for Y4
Thank you Alex Your a star
- Tue Feb 01, 2011 7:43 pm
- Forum: Ideas
- Topic: Is this Right for Y4
- Replies: 4
- Views: 3000
Re: Is this Right for Y4
Hi Alex, Thanks for checking it out, its good to know i got it right although i just deleted things that didn't apply! I checked through the code and cant find any mention of a weight coefficent and i haven't a clue how or where to apply it, sorry, I did mention that i know absolutely nothing about ...
- Tue Feb 01, 2011 11:31 am
- Forum: Ideas
- Topic: Is this Right for Y4
- Replies: 4
- Views: 3000
Is this Right for Y4
Hi, Havn't got a clue about coding but was told i need roll on front motors and no yaw, and yaw on back motors and no roll, so i copied xQuad and altered it. could someone check it and see if i have got it right "Thanks very much" //#Define Y4 #ifdef Y4 motor[0] = rcCommand[THROTTLE] + axi...