MultiWii

Disable the "telemetry" feature, then the OSD should work when the copter is armed.

More or less, yes! Cool. The starting point pretty much nailed it. The direction is fine, it's just a bit wild, but it doesn't look like a csv to kml problem, more a data problem. I think the bluetooth range is to limited for that, next time i'll strap my phone on the copter.

Two log files of very short flies. 10cm of snow and still snowing outside...

The motors keeps on with the same speed. No inputs possible anymore, no disarm and no usb/serial connection possible. It just kind of freezes.

btw: Changing frac_min doesn't help. I had another lock up after changing it.

I did a test with a u-blox GPS receiver on the same quad today. Soon it started to rain, so I could do only a short test. That test worked without a problem. Afterwards I tried the mod from crashpilot1000, but due to the rain, I could only do a indoor test. That was fine too. What I don't get is tha...

I have played a little bit with my Naze32 copter and GPS during the weekend. I've read that this is kind of dangerous and can cause crashes, but i did tried it anyway...That results in 3 crashes: One with RTH, one with POSHOLD and another one with POSHOLD after some code changes. The good thing, des...

Yeah, but that is not a problem. You can use one channel to switch multiply functions. Take a look at the screenshot. AUX2 is used for HEADADJ and HEADFREE.

But you can't activate a single function like HEADFREE with let's say AUX1 L and AUX2 H or something like that.

I like the idea of having more AUX channels and more steps, but we have to reorganize the GUI to cope with all the additional stuff. I played a little around with the GUI and came up with this: MultiWiiConfAux.png Up to 12 AUX channels and 6 binary style encoded steps per channel. The only downside ...

The modifed baseflight is working fine out of the box, but I did a quick test on the desk only. THX.

My testquad flies great with both naze32, hence both boards are fine. There must be another issue with my big copter. Probably vibrations.

@cGiesen: I think your tone won't help you with this. Yes, like Tommy's approach, you did offer a modified GUI to deal with the additional AUX channels, both are fine for basic testing, but not ready for the masses. It has a lot of free space and shows the input values and the AUX channels on differ...

It worked, but that's strange, I have another naze32 of the same revision and that one worked without the problem. I had the one with a problem mounted on a copter which flew, but It always felt like a drunken sailor, even without ACC. I moved the naze32 to my test quad to check the behavior now. Ma...

Yes, mostly. OK, i'll try. THX!

It looks like there is something wrong till r229. Can't get any gyro movement with my rev0 naze32. Any ideas?

@TC: I just want to thank you. Yesterday my third naze32 arrived after just about 10 days in Berlin. These boards are just soo cool

I like your modifications! Good work. But i have a problem with the port selection. Not all ports are listed with your new version: (same systems, only different gui's) PortBug.png What a about some tooltips? I think it could greatly help noobs to understand the gui e.g. what's the Horizon and Angle...

Please make CAMSTAB pitch and roll input channel adjustable

more infos ( patch included )
viewtopic.php?f=7&t=2498
viewtopic.php?f=7&t=1507

I had the same issue: viewtopic.php?f=7&t=1507

The Frsky transmitter and the receiver have both a RX/TX port combo, but does it actually have an separate up-link channel?

I've played with this idea some time ago and did some testing. It's possible and it's not too hard, but the following code fragments are just for testing propose and not cleany coded nor complete. You have been warned . These code segments are meant for MW 2.0. To test this you need a Mega, a level ...

That's correct.

I think this is what you are looking for: http://fpv-community.de/wiki/index.php? ... i_anlernen

Hi, here is a little patch to fix two small restrictions of the current code. The first one is that the AUX channels to control the cam pitch and roll are hardcoded to AUX3 and AUX4. The second one is that once you enable SERVO_TILT, AUX3 and AUX4 can no longer be used to switch features on/off with...

Maybe you can activate SERVO_TILT, set TILT_PITCH_PROP and TILT_ROLL_PROP to 0 and then use AUX3 and AUX4 to control the gimbal.

You can find the lastest sources here: http://code.google.com/p/multiwii/downloads/list