MultiWii

chris ables

Thanks to all who were involved in version 2.0 ! It works great for me and on my Mac ! I have it saved so i will always have it and i will always run it ! Pyro's , flips , and hauls ass as smooth as silk ! Warthox style !!!! Good job guy's and the best response for a remark is no response at all !!!...

chris ables

I dont go by those motor gui readings because mine is all uneven but my quad flies great ! Pyrofer is right also because if the gyros try to adjust they will keep trying until they get a response from the quad moving in the dirrection that they are trying to move it or they will try harder and motor...

chris ables

Yes anywhere we can download shared running files!

chris ables

I was thinking if it was possible for a shared files link to be added on the board index here for people to share working setups for diffrent boards and configurations ! I think it would help noobys that dont know how to modify files and having problems thats file related ! I mean where we can uploa...

chris ables

Just one more thing! Did you uncomment the crius board in conf.h before flashing to board? Forgot to ask you earlier! Also if your a nooby just remove the two // before the board to uncomment!

chris ables

Ok i dont know anything else to tell you to try ! Maybe something in firmware has to be set? Im just not familiar with those radio's your using! Im sorry i cant help anymore than that!

chris ables

Kaffine have you flew this board before this? Just wondering if your throttle may be reversed.

chris ables

Bill is there anything he needs to change in firmware for pcm radio? I use a spektrum and not aware of pcm radio's!

chris ables

Also as bill said the acc has to be calibrated but the first calibration mus be made with tx sticks !

chris ables

In aurduino you need to select the duemilanove w/atmega328 board before you flash firmware!

chris ables

you can change front motors to back and if same motors get hot that will tell you if it's the motors are the problem! Might be the bearings !!

chris ables

Are you running motor connectors? And if so you need to hardwire them!! Bad connectors can cause heat.

chris ables

yeah but look at the shipping price!

chris ables

I would try lowering p a little first then if that didnt do it i would change those gaui props ! They are to flexible for high speed ! They start flexing and make gyro's react! I had that problem and i ordered some gemfan props and wow what a diffrence ! Also do you hardwire your esc to motor wires?...

chris ables

http://flyingeinstein.com/index.php/tutorials/ezconnect.

chris ables

m. I also found this for you ! Theres another file you can try in the last post on this page . Also read these post! And read the note under that file on this page! Keep us imformed of any progress please! m. Oh yes also turn your transmitter on and calibrate the gyro and acc according to this link ...

chris ables

http://multikopter.co.uk/forum/index.ph ... y-version/. Try downloading and loading the file on this link!

chris ables

Have you uncommented crius multiwii se board in conf.h in firmware before flashing?

chris ables

Anyone know of a bluetooth multiwii configurator for an ipod touch that does not require jailbreak ? I have the one for my android but would really rather have it for my ipod touch ! I think whoever wrote the android app should have written the same program for ipod touch,iphone ,ipad without 3g !

chris ables

Did you click the tool tab in arduino and then boards and choose the first pro mini board ? They are 4 different pro mini boards and i believe yours is the first pro mini that they show !!

chris ables

Hey also be sure you use the 1.9 GUI ex:the same GUI as the firmware ! 1.7 gui wont work with 1.9 firmware !! You need to use the 1.9 GUI !!

chris ables

Also be sure to read this whole page as it will guide you on info for that board ! http://www.multiwiicopter.com/products/sku-25

chris ables

ok u may try one more thing ! I see you used aurdino 022 ! Try aurduino 023 ! I dont know if this will do it but maybe worth a try ! If still no luck you can try posting this question here http://www.rcgroups.com/forums/showthread.php?t=1420778 . Sorry i cant help no more than that but im kinda a newbe here also ! Good luck

chris ables

go here and download the sketch file and load it ! https://www.multiwiicopter.com/multiwii ... downloads/ These files are configured for the paris version 4 board !!

chris ables

the lpf is for vibration but mine flew ok without lpf adjustments ! Just install it and be sure your props are balanced and you should be ok ! My frame is small and thin also so thats why i use the lpf settings ! If you read the conf. file you will see the lpf settings ! Just use the file that came ...

chris ables

i have my quadrino hard mounted with nylon standoffs ! But i also use the first low pass filter in the firmware ! Mine flies great !!

chris ables

http://www.multiwiicopter.com/pages/multiwiicopter-wiki. Go to bottom of page on this link and that's what I do and it works for every brand esc!! You can also purchase a cable like this from whitespy ! This is easy and only requires receiver and esc's !!

chris ables

I use skywalker 20amp

chris ables

The new flyfun hw work fine also.

chris ables

Hi there, I just tested this mod regarding my wobble of death problem. The 400Hz mod does not fix that. So my problem lies elsewhere - DAMN! Nils Have you crashed this board? If so probably like lenz said and a bad solder joint ! Also high humidity and wet can cause things like this ! And maybe a b...

chris ables

Hi there, I built my first Quad with Turnigy Plush 25A and it was rock solid, I could throw it into the air and arm it in mid air and it leveled nicely. After I lost it I rebuilt the exact same copter but used HK Super Simple, these ESC stopped doing the stress test by forcing one motor down rapidl...

chris ables

im also running ronco's output file but dont know if that would help you ! Ive heard diffrent results with it !! it's the 400hz output file and im running skywalker 20 amp esc's with it !! Warthox said it made no difference on his but it smoothed mine out a good bit . Might be my board but i really ...

chris ables

ok fred i sent it but the board i selected was for the quadrino and not the zoom ! I flashed my friends zoom with it last !!

chris ables

I fly with just itg3200 gyro's and bma130 acc with no problems in either mode ! And i fly aggresive aerobatics ! And also have flown acc trusted and not trusted with no problems ! It does drift in wind but stays level even at long periods !

chris ables

ok how about commenting trusted acc in firmware ? Turning trusted acc off !!! If you tried this i dont know what else to tell you !! Sorry .

chris ables

Have you tried trimming the acc with transmitter sticks, not in the GUI ? This must be done at least once after installing firmware !!!

chris ables

Autolevel just keeps aircraft upright and doesnt hold it in one spot ! You have to have gps for it to stay in one spot !!

chris ables

I was running to big a prop once and had that problem !!

chris ables

Thats cool , then the refresh rate did make a difference on mine ! I installed 8x4.5 props instead of the 9x4.47 that i had on it today and wow my quad feels locked on and great ! Just flew 10 min straight at 80% to full throttle whole time and it never wobbled or bogged ! I'll try and get henry to ...

chris ables

Me and henry caldwell ran the 400hz file a bunch yesterday and had good results but dont know if it was refresh rate or lower resolution that did it but we both have good results with it ! Henry has the flyfun 18 amp and i have the skywalker 20 amp ! I wished the gui had refresh rate and resolution ...

chris ables

RCDUDE and he's fast at getting stuff to you !!!

chris ables

I dont think that futaba rx will work with specktrum though !!!

chris ables

Specktrum works great for me !!

chris ables

I fly a 30c battery in mine sometimes but power is way down and quad wobbles ! ! I fly 50c packs and get twice the power with no wobble !!

chris ables

try turning on the lpf ! The first step down usually takes care of vibration problems if not to bad !!

chris ables

Go up on your atv's in your transmitter on the full throttle position ! Sounds like your esc's are not recieving full throttle ! i had to set mine on 115% on top throttle before my esc's found full throttle !

chris ables

Ive brought this up before and it's a wish ! I wish gui to have esc refresh rate in it like xaircraft gui does ! I mean where you can set refresh rate at what the esc's refresh rate is in the gui !! Come on Alex or someone , i know this can be done !!

chris ables

You need to use the 2.0 gui that came in the multiwii 2.0 folder you downloaded !

chris ables

Ronco i have skywalker esc's and they run at 423hz ! That file runs great in my quad ! Throttle is alot smoother and quad feels 100% better !! Please let me know if you make a cleaner version as i think this is a great thing !! THANK YOU VERY MUCH ! Can you make me an output file at 423hz ? Thats wh...

chris ables

GOT IT ! I JUST REPLACE THE STOCK FILE WITH YOURS !! GREAT JOB RONCO YOU ARE THE MAN !!!! THANX !!

Search found 317 matches